AIBORS 5-Speed Cordless Dog Grooming Clippers with LCD Display User Manual

Introduction

Thank you for choosing the AIBORS 5-Speed Cordless Dog Grooming Clippers. This manual provides essential information for the safe and effective use, maintenance, and care of your grooming clippers. Please read it thoroughly before first use and retain it for future reference.

Safety Information

• Keep out of reach of children.
• Do not use near water or heat sources.
• Ensure the clipper is fully charged before use to avoid power interruptions during grooming.
• Always use the appropriate guide comb for the desired hair length to prevent accidental cuts.
• Regularly clean and oil the blades to maintain optimal performance and prevent overheating.
• Do not attempt to disassemble or repair the clipper yourself. Contact customer support for assistance.

Package Contents

The AIBORS dog grooming kit includes the following items:

• 1 x Grooming Clipper
• 6 x Guide Guards (3mm, 6mm, 9mm, 12mm, 15mm, 18mm)
• 1 x Comb
• 1 x Scissor
• 1 x Cleaning Brush
• 1 x Charging Adapter
• 1 x Blade Oil Bottle

Image: All components included in the AIBORS Dog Grooming Kit.

Product Features

• Low-Noise Design: Operates at approximately 50 decibels, minimizing stress for pets during grooming.
• 5 Speed Settings: Adjustable speeds for various fur types and grooming needs.
• Smart LCD Display: Shows battery level, current RPM, and a "Burden Value" indicator for cleaning reminders.
• Cordless Operation: Can be used wirelessly for convenience or while charging.
• Long Battery Life: A 3-hour charge provides 4-5 hours of continuous use.
• Child Lock Feature: Long press the power button for 3 seconds to activate or deactivate, preventing accidental operation.
• Ceramic Blade: Durable and sharp ceramic blade for efficient cutting.
• Adjustable Cutting Lengths: Fine-tuning switch allows for 0.5mm, 1.0mm, 1.5mm, and 2.0mm blade adjustments without guide combs.
• Quick-Release Blade: Easy to detach for cleaning and maintenance.

Image: Detailed view of the clipper's LCD display and control buttons.

Image: Illustration of the clipper's low-noise operation.

Setup

1. Initial Charging

Before first use, fully charge the clippers. Connect the charging adapter to the clipper and plug it into a power outlet. The LCD display will indicate charging status. A full charge takes approximately 3 hours.

Image: Clipper charging illustration.

2. Attaching Guide Combs

Select the desired guide comb (3mm, 6mm, 9mm, 12mm, 15mm, or 18mm) for the desired hair length. Align the comb with the clipper blade and push it firmly until it clicks into place.

Image: Guide combs and their sizes.

3. Adjusting Blade Length (without guide comb)

The clipper features a fine-tuning switch to adjust the blade length to 0.5mm, 1.0mm, 1.5mm, or 2.0mm. Use this for precise trimming or areas where a guide comb is not suitable.

Operating Instructions

1. Power On/Off and Child Lock

Press the power button to turn the clipper on or off. To activate or deactivate the child lock, press and hold the power button for 3 seconds. The lock icon on the LCD display will indicate its status.

2. Adjusting Speed Settings

Use the "+" and "-" buttons to cycle through the 5 available speed settings (RPM). Choose a lower speed for sensitive areas or nervous pets, and a higher speed for thicker fur.

3. Interpreting the LCD Display

• Battery Level: Indicates remaining battery charge.
• RPM: Displays the current operating speed.
• Burden Value: A 5-level indicator that suggests when the blades need cleaning due to accumulated hair. As the level increases, cleaning is recommended.

4. Grooming Your Pet

Ensure your pet's fur is clean and dry before grooming. Brush out any tangles. Hold the clipper firmly and move it smoothly against the direction of hair growth. Use the guide combs to achieve an even cut. For detailed work around paws, face, or ears, consider using the scissors provided or adjusting the blade to a shorter length without a comb.

Maintenance

1. Cleaning the Blades

After each use, or when the "Burden Value" indicator suggests, clean the blades. The quick-release design allows for easy removal:

1. Hold the clipper with your thumb on the blade and push down to release it.
2. Carefully hold the detached blade to prevent dropping.
3. Use the provided cleaning brush to remove loose hair from the blades and the clipper head.
4. The blades can be rinsed under running water for thorough cleaning. Ensure they are completely dry before reattaching.

Step 1: Releasing the blade.

Step 2: Handling the detached blade.

Step 3: Adjusting cutter head position.

Step 4: Reattaching the blade.

2. Oiling the Blades

After cleaning and drying, apply a few drops of the provided blade oil to the teeth of the blades. Turn the clipper on for a few seconds to distribute the oil evenly. This ensures smooth operation and prolongs blade life.

3. Storage

Store the clipper in a cool, dry place, away from direct sunlight and moisture. Ensure it is turned off and the child lock is activated if storing for extended periods.

Troubleshooting

• Clipper not turning on: Ensure the battery is charged. Check if the child lock is activated (long press power button for 3 seconds to deactivate).
• Poor cutting performance: Clean the blades thoroughly and apply blade oil. Ensure no hair is tangled in the blade mechanism. Check the "Burden Value" indicator.
• Clipper overheating: This can occur with prolonged use or if blades are dull/dirty. Clean and oil the blades. Allow the clipper to cool down before resuming use.
• Unusual noise: Clean and oil the blades. If the noise persists, contact customer support.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact AIBORS customer service directly. Keep your purchase receipt as proof of purchase.