Introduction
Thank you for choosing the BURNNOVE 900ES2 Wireless Video Baby Monitor. This device is designed to provide a secure and reliable way to monitor your baby. It features a 3.5-inch 720P LCD display, remote pan and tilt camera, two-way audio communication, infrared night vision, ECO mode for power saving, temperature monitoring, and built-in lullabies. Please read this manual thoroughly before use to ensure proper operation and to keep your baby safe.
Package Contents
Ensure all items are present and in good condition. If anything is missing or damaged, please contact customer support.
- 1 x Parent Unit (Monitor)
- 1 x Baby Unit (Camera)
- 2 x AC Power Adapters
- 1 x Screw Set for Wall Mounting
- 1 x User Manual
Product Overview
Parent Unit (Monitor)
The parent unit features a 3.5-inch color LCD screen for clear video monitoring. It includes controls for camera movement, zoom, volume, two-way talk, and menu navigation.
Image: The BURNNOVE 900ES2 parent unit (monitor) and baby unit (camera) side-by-side, illustrating their compact design.
Baby Unit (Camera)
The baby unit is equipped with a 720P camera, infrared LEDs for night vision, a microphone, speaker, and a temperature sensor. It can be remotely panned 355° horizontally and tilted 120° vertically.
Image: The baby unit camera showing its 355-degree pan and 120-degree tilt range, with the parent unit displaying the camera feed. This unit supports connection of up to 4 cameras.
Setup Guide
1. Charging the Parent Unit
- Connect one AC power adapter to the parent unit and a power outlet.
- Charge the parent unit for at least 4 hours before initial use. The battery indicator on the screen will show charging status.
2. Powering the Baby Unit
- Connect the second AC power adapter to the baby unit and a power outlet.
- The baby unit will power on automatically once connected to power.
3. Placement of the Baby Unit (Camera)
- Place the baby unit at a distance of at least 1 meter (3 feet) from your baby to avoid potential hazards.
- Ensure the camera has a clear line of sight to the baby's crib or play area.
- The camera can be placed on a flat surface or mounted to a wall using the provided screw set.
- Keep cables out of reach of children.
4. Initial Connection (Pairing)
The parent and baby units are pre-paired at the factory. They should connect automatically when both are powered on and within range. If they do not connect, refer to the 'Troubleshooting' section or the 'Adding/Managing Cameras' section in 'Operating Instructions'.
Operating Instructions
1. Power On/Off
- Parent Unit: Press and hold the Power button (U) on the parent unit for a few seconds to turn it on or off.
- Baby Unit: The baby unit powers on automatically when connected to an AC adapter. Disconnect the adapter to turn it off.
2. Menu Navigation
Use the navigation buttons (Up, Down, Left, Right) and the OK button on the parent unit to access and navigate through the menu options. The Menu button (≡) opens the main menu.
3. Video Monitoring (Zoom, Pan/Tilt)
- Zoom: Press and hold the Zoom button (magnifying glass icon) to activate 2x digital zoom. Press again to return to normal view.
- Pan/Tilt: Use the navigation buttons (Up, Down, Left, Right) on the parent unit to remotely adjust the camera's viewing angle. The camera can pan 355° horizontally and tilt 120° vertically.
Image: The parent unit displaying a baby on its 3.5-inch screen, with an overlay showing the 2x digital zoom capability for closer inspection.
4. Two-Way Talk
To speak to your baby, press and hold the Talk button (microphone icon) on the parent unit. Release the button to listen to your baby.
Image: A parent speaking into the monitor, with a thought bubble showing a baby responding, illustrating the two-way talk function.
5. Lullabies
The monitor includes 4 built-in lullabies. Access the Lullaby menu via the main menu to select and play a lullaby to soothe your baby. You can also adjust the volume.
Image: A baby sleeping peacefully in a crib, with musical notes floating around, representing the lullaby feature of the baby monitor.
6. ECO Mode (Power Saving)
Activate ECO mode from the menu to conserve battery life. In ECO mode, the parent unit screen will turn off when no sound is detected from the baby unit. The screen will automatically turn on when the baby unit detects sound, alerting you to your baby's activity. This mode can extend battery life up to 10 hours.
Image: A split image showing a baby sleeping with the monitor screen off (ECO mode) and a parent cooking with the monitor screen on (sound-activated), demonstrating the ECO power-saving feature.
7. Temperature Monitoring
The baby unit has a built-in temperature sensor that displays the room temperature on the parent unit. You can set temperature alerts to be notified if the room becomes too hot or too cold for your baby. You can switch between Celsius and Fahrenheit in the settings.
Image: A baby sleeping in a crib with the baby unit camera nearby, and the parent unit displaying the room temperature (24°C), highlighting the temperature monitoring function.
8. Alarms
Set alarms for feeding times or other reminders through the parent unit's menu. This helps maintain a schedule for your baby's care.
Image: Three panels showing a parent feeding a baby, changing a diaper, and a baby sleeping, with clock icons indicating set alarm times (2:00, 4:00, 6:00), illustrating the alarm reminder feature.
9. Adding/Managing Cameras (Up to 4 Cameras)
The BURNNOVE 900ES2 system supports up to four baby units (cameras). To add additional cameras:
- Access the 'Camera' menu on the parent unit.
- Select an empty camera channel (e.g., Camera 2, 3, or 4).
- Follow the on-screen instructions to pair the new baby unit. This usually involves pressing a pairing button on the baby unit within a specific timeframe.
- To switch between connected cameras, briefly press the OK button on the parent unit.
Image: The parent unit displaying a feed, with four smaller camera icons below, indicating the ability to connect and switch between up to four cameras for monitoring multiple areas or children.
Maintenance
- Clean the monitor and camera units with a dry, soft cloth. Do not use cleaning agents or solvents.
- Avoid exposing the units to direct sunlight, heat sources, or extreme cold.
- Do not immerse the units in water.
- Ensure proper ventilation for both units.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image/sound on parent unit | Units are not powered on or out of range. Not paired. | Ensure both units are powered on and charged. Move units closer. Re-pair units if necessary (refer to 'Adding/Managing Cameras'). |
| Poor image quality | Low light, camera lens dirty, or interference. | Ensure adequate lighting. Clean camera lens. Move units away from other electronic devices. |
| Static or interference | Other 2.4GHz devices nearby. | Move the monitor and camera away from Wi-Fi routers, microwaves, or cordless phones. |
| Parent unit battery drains quickly | ECO mode off, continuous use. | Activate ECO mode. Reduce screen brightness. Ensure full charge before use. |
| Night vision not working | Infrared sensor blocked or damaged. | Ensure nothing is obstructing the camera's view. Contact support if issue persists. |
Specifications
- Model: 900ES2
- Screen Size: 3.5 inches LCD
- Video Resolution: 720P
- Connectivity Protocol: 2.4 GHz FHSS (Secure, No Wi-Fi/App required)
- Camera Pan Angle: 355° (Horizontal)
- Camera Tilt Angle: 120° (Vertical)
- Night Vision Range: Up to 5 meters (16 feet)
- Operating Range: Up to 300 meters (1000 feet) in open space
- Battery Life (Parent Unit): Up to 10 hours (ECO mode)
- Power Source: Parent Unit: Rechargeable Battery; Baby Unit: AC Powered
- Material: Plastic
- Dimensions (L x W x H): 15 x 13 x 10 cm (approximate)
- Weight: 690 grams (approximate)
- Special Features: Two-Way Talk, Lullabies (4), ECO Mode, Temperature Sensor, Alarm Function, Multi-Camera Support (up to 4)
Image: An illustration showing the baby monitor system's secure 2.4GHz FHSS wireless transmission, emphasizing no Wi-Fi or app is needed, and a range of up to 300m.
Safety Information
- STRANGULATION HAZARD: Keep all cords out of reach of children (at least 1 meter / 3 feet away). Never place the camera or cords within reach of the crib or playpen.
- CHOKING HAZARD: This product contains small parts. Keep out of reach of children.
- OVERHEATING HAZARD: Do not cover the monitor or camera with blankets or towels. Ensure proper ventilation.
- WATER AND MOISTURE: Do not expose the units to water or moisture. This product is for indoor use only.
- BATTERY SAFETY: The parent unit contains a rechargeable battery. Do not attempt to replace it yourself. Use only the provided power adapters.
- This product is intended as an aid. It is not a substitute for responsible adult supervision.
Warranty and Support
BURNNOVE products come with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or contact BURNNOVE customer support directly. If you encounter any issues or have questions regarding your product, please reach out to our support team for assistance.