Kircuit 1002FX
Kircuit Power Supply User Manual
Compatible with Behringer Xenyx 1002FX Mixer
Introduction
This manual provides essential information for the safe and effective use of your Kircuit Power Supply, designed for compatibility with the Behringer Xenyx 1002FX Mixer. Please read this manual thoroughly before operation.
Figure 1: Kircuit Power Supply. This image shows the black rectangular power supply unit with its attached AC power cord ending in a standard two-prong plug, and a DC output cable ending in a barrel connector.
Safety Information
- Ensure the power supply is used with compatible devices only, specifically the Behringer Xenyx 1002FX Mixer.
- Do not expose the power supply to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the power supply to severe impacts.
- Do not attempt to open or modify the power supply. Refer servicing to qualified personnel.
- Unplug the power supply from the electrical outlet when not in use for extended periods.
- Keep out of reach of children.
Package Contents
Verify that all items are present in the package:
- 1 x Power Supply
Setup
- Inspect the Power Supply: Before connecting, visually inspect the power supply and its cables for any signs of damage.
- Identify Ports: Locate the power input port on your Behringer Xenyx 1002FX Mixer.
- Connect to Mixer: Carefully insert the barrel connector of the Kircuit Power Supply into the power input port of your Behringer Xenyx 1002FX Mixer. Ensure a snug fit.
- Connect to Power Outlet: Plug the AC power cord of the power supply into a standard electrical outlet (100V AC).
Note: This power supply is designed to support international voltages, but always ensure the local voltage matches the power supply's input specifications (100 Volts AC) to prevent damage.
Operating Instructions
Once connected, the power supply will provide the necessary DC power to your Behringer Xenyx 1002FX Mixer. The mixer should power on according to its own operational procedures.
- Ensure all connections are secure before powering on the mixer.
- Do not overload the power supply by connecting it to incompatible devices or devices requiring higher power than specified.
- If the mixer does not power on, refer to the Troubleshooting section of this manual or the mixer's own user manual.
Maintenance
The Kircuit Power Supply requires minimal maintenance.
- Cleaning: Use a soft, dry cloth to wipe the exterior of the power supply. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the power supply in a cool, dry place, away from direct sunlight and extreme temperatures. Coil the cables loosely to prevent damage.
- Inspection: Periodically inspect the cables and connectors for any signs of wear, fraying, or damage. If damage is observed, discontinue use immediately.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mixer does not power on. | Power supply not properly connected. | Ensure the barrel connector is fully inserted into the mixer and the AC plug is securely in the wall outlet. |
| No power from outlet. | Test the outlet with another device. Check circuit breaker. | |
| Damaged power supply or cable. | Inspect for visible damage. Discontinue use if damaged. Contact support. | |
| Power supply feels hot. | Normal operation (slight warmth). | A slight warmth is normal. If it's excessively hot to touch, unplug immediately and contact support. Ensure adequate ventilation. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Kircuit |
| Compatible Devices | Behringer Xenyx 1002FX Mixer |
| Input Voltage | 100 Volts (AC) |
| Connector Type | BARREL |
| Color | Black |
| Included Components | 1 x Power Supply |
| Manufacturer | Shenzhen Waweis Technology Co., Ltd |
Warranty and Support
For any questions or concerns regarding your Kircuit Power Supply, please contact the seller or manufacturer directly. Information regarding specific warranty terms may be provided by the point of purchase or included with your product packaging.
As per product information: "Please contact us with any questions or concerns."
Note: Protection plans are available for purchase separately through Amazon. These plans are not provided by Kircuit directly but offer extended coverage.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.