1. Introduction
Thank you for purchasing the boAt PartyPal 220 Bluetooth Party Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it carefully before use to ensure optimal performance and longevity of the device.
1.1 Package Contents
Ensure all items listed below are present in your package:
- boAt PartyPal 220 Speaker
- Wireless Microphone
- Charging Cable (Type-C)
- Auxiliary Cable
- Instruction Manual (this document)
Image: The boAt PartyPal 220 speaker shown with its accompanying wireless microphone.
2. Setup Guide
2.1 Charging the Speaker
Before first use, fully charge the speaker. Connect the provided Type-C charging cable to the speaker's charging port and the other end to a compatible USB power adapter (not included). The charging indicator will show the charging status. A full charge provides up to 6 hours of playback.
Image: Close-up view of the speaker's rear panel, highlighting the Type-C charging port, AUX in, USB port, and TF card slot.
2.2 Powering On/Off
Locate the power button on the control panel. Press and hold the power button for a few seconds to turn the speaker on or off. A sound prompt will indicate the power status.
3. Operation
3.1 Bluetooth Pairing
- Turn on the PartyPal 220 speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED.
- Enable Bluetooth on your mobile device, laptop, or tablet.
- Search for "boAt PartyPal 220" in the list of available devices.
- Select "boAt PartyPal 220" to connect. A confirmation sound will indicate successful pairing.
3.2 AUX Input
To play audio from devices without Bluetooth, use the provided auxiliary cable. Connect one end to the speaker's AUX-in port and the other end to your audio source's headphone jack. The speaker will automatically switch to AUX mode.
3.3 USB Playback
Insert a USB drive containing MP3 audio files into the USB port on the speaker. The speaker will automatically detect the USB drive and begin playing music.
3.4 Wireless Microphone Usage
The PartyPal 220 includes a wireless microphone for karaoke or announcements. Turn on the microphone, and it will automatically connect to the speaker. Adjust microphone volume using the dedicated controls on the speaker's control panel.
Image: The boAt PartyPal 220 speaker positioned next to its wireless microphone, illustrating its use for karaoke.
3.5 TWS (True Wireless Stereo) Mode
For an enhanced stereo experience, you can connect two PartyPal 220 speakers wirelessly:
- Ensure both speakers are powered on and not connected to any Bluetooth device.
- On one speaker (this will be the primary speaker), press and hold the TWS button. The speaker will enter TWS pairing mode.
- The primary speaker will automatically search for and connect to the second speaker. A confirmation sound will indicate successful TWS pairing.
- Once connected, pair your device to the primary speaker via Bluetooth as described in section 3.1.
Image: A visual representation of the speaker's bass and treble controls, alongside an illustration of two speakers connected in TWS mode.
3.6 RGB LED Modes
The speaker features dynamic RGB LEDs. Use the dedicated LED button on the control panel to cycle through different lighting modes or turn them off. The LEDs enhance the audio experience.
Image: The boAt PartyPal 220 speaker displaying its dynamic RGB LED lighting effects.
3.7 Bass & Treble Controls
Adjust the bass and treble levels using the dedicated controls on the speaker's top panel to customize your audio experience. The Bass Booster function can be activated for deeper bass.
4. Maintenance
4.1 Cleaning
Wipe the speaker's exterior with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents. Avoid exposing the speaker to excessive moisture.
4.2 Storage
When not in use for extended periods, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the speaker is fully charged before storing to preserve battery life.
5. Troubleshooting
If you encounter issues with your PartyPal 220, refer to the following table for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery or no power. | Charge the speaker using the provided Type-C cable. Ensure the power adapter is working. |
| Cannot pair via Bluetooth. | Speaker not in pairing mode, device Bluetooth off, or too far. | Ensure speaker is in pairing mode. Turn Bluetooth off and on on your device. Move device closer to speaker (within 10 meters). Forget "boAt PartyPal 220" from your device's Bluetooth list and re-pair. |
| No sound from speaker. | Volume too low, incorrect input mode, or faulty cable. | Increase speaker and device volume. Check if the correct input mode (Bluetooth, AUX, USB) is selected. Ensure cables are securely connected. |
| Microphone not working. | Microphone off, low battery, or not paired. | Ensure the wireless microphone is powered on. Check microphone battery. Re-pair the microphone if necessary. Adjust microphone volume on the speaker. |
| TWS mode not connecting. | Speakers already paired to another device, or TWS pairing not initiated correctly. | Ensure both speakers are disconnected from other Bluetooth devices. Follow TWS pairing steps precisely (Section 3.5). |
6. Product Specifications
Below are the technical specifications for the boAt PartyPal 220 speaker:
| Feature | Detail |
|---|---|
| Model Name | PartyPal 220 |
| Brand | boAt |
| Audio Output | 80 Watts Signature Sound |
| Connectivity | Bluetooth v5.3, AUX, USB, TF Card |
| Playback Time | Up to 6 hours |
| Charging Interface | Type-C |
| Special Features | Dynamic RGB LEDs, Wireless Microphone, Bass & Treble EQs, TWS Mode |
| Power Source | Battery Powered (1 x 12V Lithium Ion battery included) |
| Dimensions (LxWxH) | 28 x 35 x 26.5 cm |
| Item Weight | 5.78 kg |
| Manufacturer | Imagine Marketing Ltd |
| Country of Origin | China |
7. Warranty Information
The boAt PartyPal 220 comes with a standard manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the warranty card included in your package or visit the official boAt website. Keep your purchase receipt as proof of purchase for warranty claims.
8. Customer Support
For any queries, technical assistance, or service requests, please contact boAt customer support:
- Email: info@imaginemarketingindia.com
- Website: Visit the official boAt website for FAQs and support resources.