1. Introduction
The EYTSE WRNL07 Moving Head DJ Light is a versatile and powerful lighting solution designed to enhance the atmosphere of various events, from home parties to professional stage performances. Featuring 150W RGBW 4-in-1 LED technology, 6 independently moving arms, and integrated red and green lasers, this light creates stunning mixed lighting effects. It offers multiple control options including DMX-512, sound activation, auto mode, master/slave, and remote control, providing flexibility for any user. Its robust design incorporates an efficient cooling system for stable and long-lasting performance.
Figure 1: The EYTSE WRNL07 Moving Head DJ Light, showcasing its main unit with six arms, central LEDs, and an included remote control.
2. Safety Information
Please read and understand all safety instructions before installing, operating, or maintaining this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Indoor Use Only: This device is designed for indoor use in dry locations. Do not expose to rain or moisture.
- Power Supply: Ensure the power supply voltage matches the requirements specified on the product label. Always use the provided power cord.
- Grounding: Always connect the device to a grounded power outlet.
- Ventilation: Do not block ventilation openings. Ensure adequate airflow around the unit to prevent overheating.
- Laser Safety: This product contains lasers. Avoid direct eye exposure to the laser beam. Do not look directly into the light source.
- Installation: Ensure the mounting surface or truss is capable of supporting the weight of the fixture. Use appropriate mounting hardware.
- Maintenance: Disconnect from power before cleaning or performing any maintenance. Refer all servicing to qualified personnel.
- Temperature: Do not operate the device in extremely high or low temperatures.
3. Package Contents
Verify that all items listed below are included in your package:
- Moving Head DJ Light (WRNL07) x 1
- Remote control x 1
- User manual x 1
- Power cord x 1
- Mounting bracket x 1
- Mounting screws x 2
Figure 2: Illustration of the items included in the product package, such as the light unit, remote, power cord, mounting bracket, and screws.
4. Product Features
- Stunning Light Effects: Features 10 vibrant LED beads (4 central, 1 on each of 6 rotating arms) and built-in red and green lasers for dynamic starry sky effects.
- Multiple Control Modes: Offers DMX-512, sound-activated, auto, master/slave, and remote control for versatile operation.
- Efficient Cooling System: Equipped with a powerful fan, dual top-and-bottom ventilation holes, and a rugged aluminum alloy housing for stable, continuous use.
- Easy Installation: Built-in metal handle allows quick mounting to ceilings, trusses, or walls.
- Dynamic Movement: Provides 540° horizontal rotation and 180° vertical rotation for broad coverage.
4.1 Mixed Lighting Effects
The combination of RGBW LEDs and integrated lasers allows for a wide array of captivating light patterns and color combinations, suitable for various event types.
Figure 3: Examples of diverse lighting patterns and color mixes produced by the unit, including laser and LED combinations.
Figure 4: A collage demonstrating the range of mixed lighting effects, including laser patterns and LED washes, suitable for different environments.
4.2 Efficient Cooling System
The robust cooling system ensures the light operates efficiently and maintains stable performance even during extended use. This system includes an aluminum alloy housing, a powerful fan, and strategically placed ventilation holes.
Figure 5: An illustration highlighting the aluminum material, high-efficiency fan, and four cooling holes that contribute to the light's thermal management.
Figure 6: A visual breakdown of the cooling system, showing top and bottom cooling vents, the internal fan, and the durable aluminum alloy casing.
5. Setup
5.1 Mounting the Light
The EYTSE WRNL07 can be mounted in various orientations using the included mounting bracket and screws. Ensure the mounting surface is stable and can safely support the light's weight (approximately 9.98 lbs / 4.5 kg).
- Attach the mounting bracket to the desired surface (ceiling, truss, or wall) using the provided mounting screws. Ensure the screws are securely fastened.
- Align the light fixture with the mounted bracket and secure it using the appropriate attachment points on the light.
- Verify that the light is firmly attached and stable before proceeding.
Figure 7: Diagram illustrating the light's dimensions (13"L x 8"W x 13"H) and its 540° horizontal and 180° vertical rotation capabilities, important for planning installation.
5.2 Connecting Power and DMX
Connect the power cord to the "POWER IN" port on the back of the unit and then to a suitable power outlet. For DMX control, connect DMX cables from your DMX controller to the "DMX IN" port. Use the "DMX OUT" port to daisy-chain multiple units.
Figure 8: Detailed view of the light's control panel (UP, DOWN, MENU, ENTER buttons and display) and the rear connection ports (POWER IN, DMX IN, DMX OUT).
6. Operation
The EYTSE WRNL07 offers several control modes to suit different applications and user preferences.
6.1 Control Panel Navigation
Use the buttons on the control panel to navigate menus and select modes:
- MENU: Access the main menu or go back to the previous menu.
- UP/DOWN: Navigate through menu options or adjust parameter values.
- ENTER: Confirm selection or enter a submenu.
6.2 Control Modes
- DMX-512 Mode:
Allows professional control over various parameters such as dimming, color, movement, and effects using a DMX controller. Refer to the DMX channel chart (not provided in this manual, typically found in a separate DMX guide) for specific channel assignments.
Figure 9: Visual representation of DMX control, demonstrating linear dimming from 10% to 100% for precise light intensity adjustment.
Figure 10: The DJ light shown in conjunction with a DMX-384B controller, illustrating the setup for DMX-512 and Master/Slave modes.
- Sound-Activated Mode:
The light reacts to ambient sound or music, changing patterns and intensity in sync with the beat. Adjust sensitivity using the remote control.
- Auto Mode:
The light cycles through pre-programmed patterns and effects automatically without external input.
- Master/Slave Mode:
Connect multiple WRNL07 units via DMX cables. Set one unit as "Master" and others as "Slave." Slave units will mirror the Master's operations, creating synchronized lighting displays.
- Remote Control:
Use the included wireless remote control for convenient operation from a distance. The remote allows switching between modes, adjusting speed, sensitivity, and turning the light on/off.
Figure 11: A diagram detailing the buttons and functions of the remote control, including ON/OFF, DMX, AUTO, speed adjustment, voice sensitivity, and specific effect modes (LED bee eye, 6 arms, laser, macro, sound control).
Figure 12: The DJ light depicted with icons representing Sound Pickup, Sound Activated mode, and the remote control, illustrating these control options.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your EYTSE WRNL07 DJ Light.
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use abrasive cleaners or solvents. Periodically clean the lens to ensure clear light output.
- Ventilation: Ensure ventilation openings are free from dust and debris. Use compressed air to clear any blockages if necessary.
- Storage: When not in use for extended periods, store the light in a cool, dry place, away from direct sunlight and extreme temperatures.
- Inspection: Regularly inspect the power cord, DMX cables, and mounting hardware for any signs of damage or wear. Replace damaged components immediately.
8. Troubleshooting
If you encounter issues with your EYTSE WRNL07 DJ Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; faulty power cord; unit malfunction. | Check power connection and outlet. Try a different power cord. If issue persists, contact support. |
| No DMX control. | Incorrect DMX address; faulty DMX cable; DMX controller issue; incorrect mode setting. | Verify DMX address on the light matches controller. Check DMX cable connections. Ensure light is in DMX mode. Test with another DMX cable or controller. |
| Light not reacting to sound. | Sound-activated mode not selected; microphone sensitivity too low; no sound input. | Ensure Sound-Activated mode is active. Increase microphone sensitivity via remote. Ensure there is sufficient sound near the unit. |
| Movement is erratic or limited. | Obstruction; internal issue. | Ensure nothing is obstructing the moving parts. If the issue persists, contact support. |
| Remote control not working. | Dead battery; obstruction; out of range. | Replace remote battery. Ensure no objects are blocking the signal. Operate within effective range. |
9. Specifications
Technical specifications for the EYTSE WRNL07 Moving Head DJ Light:
| Attribute | Detail |
|---|---|
| Model Number | WRNL07 |
| Brand | EYTSE |
| Light Source Type | Light Emitting Diode (LED) |
| Wattage | 150 Watts |
| Voltage | 120 Volts (AC) |
| Color | Black |
| Material | Iron, Plastic |
| Finish Type | Painted |
| Product Dimensions | 13"L x 8"W x 13"H (33 x 20.3 x 33 cm) |
| Item Weight | 9.98 pounds (4.53 kg) |
| Mounting Type | Ceiling Mount |
| Control Modes | DMX-512, Sound-activated, Auto, Master/Slave, Remote Control |
| Horizontal Rotation | 540° |
| Vertical Rotation | 180° |
| Included Components | Party Lights x 1, Remote control x 1, User manual x 1, Power cord x 1, Mounting bracket x 1, Mounting screws x 2 |
10. Warranty and Support
EYTSE is committed to providing high-quality products and customer satisfaction. While specific warranty details are not provided in this manual, our dedicated support team is available to assist you with any questions or concerns regarding your product.
For technical assistance, troubleshooting, or product inquiries, please reach out to us via email. We aim to respond to all inquiries within 24 hours.
Please retain your purchase receipt as proof of purchase for any warranty claims or support requests.