Introduction
This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your TOTAL TP5434411 Gasoline Grass Trimmer & Bush Cutter. Please read these instructions carefully before using the product to ensure proper handling and to prevent injury or damage. Keep this manual for future reference.
Safety Information
Always prioritize safety when operating power tools. Failure to follow safety instructions can result in serious injury.
- Read the Manual: Understand all instructions and warnings before use.
- Personal Protective Equipment (PPE): Always wear safety glasses, hearing protection, heavy-duty gloves, long pants, and sturdy, non-slip footwear.
- Work Area: Keep the work area clear of other people, children, and pets. Maintain a safe distance from bystanders (at least 15 meters).
- Fuel Handling: Handle gasoline with extreme care. Store fuel in approved containers, away from ignition sources. Refuel outdoors, with the engine off and cool.
- Inspection: Before each use, inspect the trimmer for loose parts, damage, or wear. Ensure all guards are in place and secure.
- Engine Off: Always turn off the engine before making adjustments, clearing blockages, or performing maintenance.
- Avoid Contact: Keep hands and feet away from the cutting attachment while the engine is running.
- Weather Conditions: Do not operate in rain or wet conditions.
- Fatigue: Do not operate the trimmer when tired or under the influence of drugs or alcohol.
Components Overview
Familiarize yourself with the main components of your TOTAL Gasoline Grass Trimmer & Bush Cutter.
Image 1: The TOTAL TP5434411 Gasoline Grass Trimmer and Bush Cutter, fully assembled, shown with its engine unit, long shaft, handle, safety guard, and two cutting attachments: a 3-tooth metal blade and a line spool. The engine is at the top, the handle is positioned for ergonomic use, and the cutting attachments are at the bottom, ready for installation.
- Engine Unit: Contains the 42.7cc, 2HP 2-stroke engine.
- Shaft: The long pole connecting the engine to the cutting head.
- Handlebar: Ergonomic handle for control and maneuverability.
- Throttle Trigger: Controls engine speed.
- Safety Guard: Protects the user from debris and the cutting attachment.
- Cutting Head: Area where the cutting attachment (line spool or blade) is mounted.
- Line Spool (Trimmer Head): Used for cutting grass and light vegetation.
- 3-Tooth Blade (Bush Cutter Blade): Used for thicker brush and small saplings.
- Fuel Tank: For gasoline and oil mixture.
Setup
1. Assembly
- Attach the Handlebar: Securely fasten the handlebar to the shaft using the provided clamps and bolts. Ensure it is positioned comfortably for operation.
- Install the Safety Guard: Mount the safety guard to the lower part of the shaft, above the cutting head. Ensure it is firmly attached and provides adequate protection.
- Select and Install Cutting Attachment:
- For Grass Trimming (Line Spool): Attach the line spool to the cutting head. Follow the specific instructions in the manual for your model to ensure correct mounting.
- For Bush Cutting (3-Tooth Blade): Attach the 3-tooth metal blade to the cutting head. Ensure the blade is correctly oriented and securely fastened with the retaining nut and washer. Always use the appropriate tools for tightening.
2. Fuel Mixing
This unit uses a 2-stroke engine and requires a specific mixture of unleaded gasoline and 2-stroke engine oil. Refer to the engine manufacturer's recommendations for the exact mixing ratio (e.g., 25:1 or 50:1). Always use fresh, high-quality fuel and oil.
- Mix fuel in an approved container.
- Pour the correct amount of 2-stroke oil into the gasoline.
- Shake the container thoroughly to ensure proper mixing.
- Fill the trimmer's fuel tank carefully, avoiding spills. Do not overfill.
Operating Instructions
1. Starting the Engine
- Place the trimmer on a flat, stable surface.
- Ensure the ON/OFF switch is in the "ON" position.
- Engage the choke (if cold start).
- Press the primer bulb several times until fuel is visible.
- Pull the starter cord firmly and smoothly until the engine attempts to start.
- Once the engine fires (or after a few pulls), disengage the choke.
- Pull the starter cord again until the engine starts and runs smoothly.
- Allow the engine to warm up for a few moments before engaging the throttle.
2. Using the Trimmer/Cutter
- Hold the trimmer firmly with both hands, maintaining a balanced stance.
- Keep the cutting attachment away from your body and other objects.
- For Grass Trimming: Use a sweeping motion, cutting from right to left for optimal debris deflection. Do not force the line into thick vegetation.
- For Bush Cutting: Approach brush slowly and deliberately. Use the lower part of the blade for cutting. Be aware of kickback, especially when cutting thicker material.
- Maintain a consistent engine speed.
- Avoid hitting hard objects like rocks, fences, or concrete.
3. Stopping the Engine
- Release the throttle trigger to allow the engine to idle.
- Move the ON/OFF switch to the "OFF" position.
- Wait for all moving parts to come to a complete stop before setting the trimmer down.
Maintenance
Regular maintenance ensures optimal performance and extends the life of your trimmer. Always ensure the engine is off and cool before performing any maintenance.
- Cleaning: After each use, clean the trimmer, especially the cutting head and air intake vents, from grass, dirt, and debris.
- Air Filter: Check and clean the air filter regularly (e.g., every 10 hours of operation). Replace if damaged.
- Spark Plug: Inspect the spark plug periodically. Clean or replace if fouled or worn.
- Fuel Filter: Check the fuel filter in the fuel tank for blockages. Replace if necessary.
- Cutting Attachments:
- Line Spool: Replace trimmer line as needed. Ensure the correct diameter and type of line is used.
- Blade: Inspect the blade for sharpness and damage. Sharpen or replace dull/damaged blades.
- General Inspection: Check all nuts, bolts, and fasteners for tightness. Inspect fuel lines for cracks or leaks.
- Storage: For long-term storage, drain the fuel tank or use a fuel stabilizer. Clean the unit thoroughly and store in a dry, secure location.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine won't start | No fuel, incorrect choke setting, fouled spark plug, clogged fuel filter. | Check fuel level and mixture, adjust choke, clean/replace spark plug, clean/replace fuel filter. |
| Engine runs poorly/lacks power | Dirty air filter, incorrect fuel mixture, worn spark plug, carburetor issues. | Clean air filter, ensure correct fuel mixture, replace spark plug, consult service center for carburetor. |
| Cutting attachment not spinning | Obstruction, damaged drive shaft, clutch issue. | Turn off engine and clear obstruction, inspect drive shaft, consult service center. |
| Excessive vibration | Damaged or unbalanced blade, loose components. | Inspect and replace blade if damaged, tighten all fasteners. |
Specifications
| Model Number | TP5434411 |
| Displacement | 42.7cc |
| Rated Power | 1.25Kw (2HP) |
| Max Speed | 9000rpm |
| Max Cutting Path (Trimmer) | 420mm |
| Spool Liner Diameter | 2.4mm x 4m |
| Blade Diameter (3-teeth) | 255mm |
| Fuel Tank Capacity | 1200ml |
| Engine Type | Powerful 2-stroke motor, Air cooled engine, single cylinder |
| Functions | Trimmer and Cutter |
| Item Weight | 10 kg (10000 Grams) |
| Product Dimensions | 105L x 52W Centimeters |
| Assembly Required | Yes |
| Country of Origin | China |
Warranty and Support
For warranty information, technical support, or to order replacement parts, please contact TOTAL customer service or your authorized dealer. Keep your purchase receipt as proof of purchase.
Specific warranty terms and conditions may vary by region. Refer to the warranty card included with your product or visit the official TOTAL website for detailed information.
