Introduction
Thank you for choosing the XOSS XL-1200 Bike Headlight. This high-brightness, USB-C rechargeable bicycle headlight is designed to enhance your night riding experience with its powerful 1200 lumens output and durable aluminum shell. This manual provides essential information for the proper setup, operation, and maintenance of your new headlight.
Safety Information
- Always ensure the headlight is securely mounted before riding.
- Do not look directly into the light beam to avoid temporary vision impairment.
- Charge the battery fully before first use and whenever the battery level is low.
- While the light is IPX6 waterproof, avoid prolonged submersion.
- Keep out of reach of children.
Package Contents
Please check the package to ensure all items are present:
- 1 x XOSS XL-1200 Bike Headlight
- 1 x Handlebar Mount
- 1 x USB-C Charging Cable
- 1 x User Manual (this document)
Product Overview
Image: The XOSS XL-1200 Bike Headlight (left) mounted on a handlebar, alongside its separate handlebar mount (right). The headlight features a clear lens and a black aluminum body with the XOSS logo. The mount is also black and designed for secure attachment.
The XOSS XL-1200 headlight features a robust aluminum alloy exterior, a powerful LED light source, and a single control button. The package includes a versatile mount that supports both positive (above handlebar) and hanging (below handlebar) installation methods.
Setup
1. Charging the Headlight
- Locate the USB-C charging port on the headlight.
- Connect the provided USB-C cable to the headlight and a compatible USB power source (e.g., computer, wall adapter).
- The charging indicator will show the charging status. A full charge typically takes approximately 9 hours.
- Once fully charged, disconnect the cable.
2. Installing the Mount
The mount is designed for easy installation and removal on various bicycle handlebars.
- Choose your preferred mounting method:
- Positive Mounting: Positions the headlight above the handlebar.
- Hanging Mounting: Positions the headlight below the handlebar.
- Place the mount around your bicycle handlebar at the desired position.
- Secure the mount firmly using the integrated screw or lever mechanism until it is stable and does not rotate.
3. Attaching the Headlight to the Mount
- Align the headlight with the mounting slot on the installed handlebar mount.
- Slide the headlight onto the mount until it clicks securely into place. Ensure it is firmly attached to prevent accidental detachment during riding.
- To remove, press the release tab (if present) and slide the headlight off the mount.
Operating Instructions
Power On/Off
- To turn on the headlight, press and hold the power button located on the top of the light.
- To turn off the headlight, press and hold the power button again.
Changing Lighting Modes
The XOSS XL-1200 features 6 distinct lighting modes:
- High Light Mode: Maximum brightness (1200 lumens) for optimal visibility.
- Medium Light Mode: Balanced brightness for general riding.
- Low Light Mode: Reduced brightness for extended battery life or less demanding conditions.
- Power Saving Mode: Lowest brightness setting for maximum battery endurance.
- Flash Light Mode: Flashing pattern for increased daytime visibility or emergency signaling.
- SOS Mode: International Morse code for distress signal.
To cycle through the modes, short press the power button while the light is on.
Battery Level Alert
The headlight is equipped with red power indicators on the side. These indicators will illuminate when the battery level drops below 20%, reminding you to recharge the device.
Maintenance
- Cleaning: Wipe the headlight and lens with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Water Resistance: The headlight has an IPX6 waterproof rating, meaning it is protected against powerful water jets. It can be used in rainy conditions, but it is not designed for submersion.
- Storage: Store the headlight in a cool, dry place when not in use. For long-term storage, ensure the battery is partially charged (around 50%) to prolong its lifespan. Recharge every 3-6 months if stored for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. | Charge the headlight fully using the USB-C cable. |
| Light turns off unexpectedly. | Low battery level. | Recharge the headlight. |
| Light flickers or is dim. | Low battery or dirty lens. | Charge the headlight. Clean the lens with a soft cloth. |
| Headlight is loose on the mount. | Not properly secured. | Ensure the headlight is clicked firmly into the mount. Re-tighten the mount on the handlebar if necessary. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | XL-1200 |
| Brightness | 1200 Lumens |
| Battery Capacity | 3200mAh (Built-in) |
| Charging Port | USB-C |
| Run Time | Up to 9 hours (influenced by brightness setting) |
| Lighting Modes | High, Medium, Low, Power Saving, Flash, SOS (6 modes) |
| Material | Aluminium Alloy Exterior |
| Water Resistance | IPX6 |
| Mounting Type | Frame Mount (supports positive or hanging) |
| Color | Black |
Warranty and Support
The XOSS XL-1200 Bike Headlight comes with a One Year Warranty from the date of purchase.
This warranty covers manufacturing defects and issues arising from normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.
For warranty claims, technical support, or any questions regarding your product, please contact XOSS customer service through the retailer where you purchased the product or visit the official XOSS website for contact information.
We are committed to providing high-quality products and excellent after-sales experience.
