Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your new King of Car Tuning Black Aluminum Running Boards. These running boards are designed to provide a sturdy and convenient step for entering and exiting your Hyundai Santa Fe (model years 2024, 2025, and 2026). Constructed from durable, corrosion-resistant aluminum, they offer enhanced accessibility and a sleek appearance.
Setup and Installation
Important: Professional installation is recommended for optimal safety and performance. Ensure all components are present and undamaged before beginning installation. If you are unsure about fitment, please consult the manufacturer or seller.
Package Contents:
- 2 x Black Aluminum Running Boards
- Mounting Brackets
- Screws and Fasteners
Required Tools (Not Included):
- Socket Wrench Set
- Torque Wrench
- Safety Glasses
- Work Gloves
Installation Steps:
- Preparation: Park the vehicle on a level surface and engage the parking brake. For safety, consider using jack stands if lifting the vehicle.
- Identify Mounting Points: Locate the factory mounting holes on the vehicle's chassis along the rocker panel. These running boards are designed for a simple bolt-on installation, requiring no drilling.
- Attach Brackets: Secure the provided mounting brackets to the vehicle's frame using the supplied screws and fasteners. Ensure all bolts are hand-tightened initially. Refer to the image below for an example of the mounting hardware.
- Position Running Board: Carefully lift one running board and align it with the installed brackets. The running board features a wide surface for a sturdy step.
- Secure Running Board: Attach the running board to the brackets using the remaining fasteners. Ensure proper alignment before tightening.
- Final Tightening: Once both running boards are in place and aligned, progressively tighten all bolts to the manufacturer's recommended torque specifications. Do not overtighten.
- Repeat for Other Side: Follow the same steps for the installation of the running board on the opposite side of the vehicle.
- Final Check: After installation, gently test the stability of both running boards. Ensure all fasteners are secure and there is no excessive movement.
Image: Close-up view of the running board's mounting track and screws.
Image: Two running boards showing the textured top surface.
Image: Running board installed on a Hyundai Santa Fe, showcasing its integration with the vehicle's exterior.
Operating Instructions
The running boards are designed to provide a stable and secure step for easier access to your vehicle. Step onto the textured surface when entering or exiting the vehicle. The wide surface ensures comfortable and safe use.
Weight Capacity:
Each running board is rated to support a maximum weight of 400 pounds (approximately 181 kg). Do not exceed this weight limit to prevent damage to the running board or vehicle.
Image: Detailed view of the textured surface designed for enhanced grip.
Maintenance
Regular maintenance will ensure the longevity and appearance of your running boards.
Cleaning:
- Clean the running boards regularly with mild automotive soap and water.
- Use a soft brush or cloth to remove dirt and debris from the textured surface.
- Rinse thoroughly with clean water and dry to prevent water spots.
- Avoid using abrasive cleaners, harsh chemicals, or stiff brushes, as these can damage the finish.
Inspection:
- Periodically inspect all mounting hardware (brackets, bolts, screws) for tightness. Re-tighten any loose fasteners to prevent rattling or instability.
- Check the running boards for any signs of damage, such as cracks, bends, or excessive wear on the textured surface.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Running board feels loose or rattles | Loose mounting bolts or brackets. | Inspect and re-tighten all mounting bolts and fasteners. Ensure brackets are securely attached to the vehicle frame. |
| Unusual noise during vehicle operation | Loose components or interference with other vehicle parts. | Check all mounting points for tightness. Verify that the running board does not contact any other part of the vehicle during driving. |
| Difficulty stepping on/off | Surface is slippery due to dirt or ice. | Clean the textured surface thoroughly. Exercise caution in wet or icy conditions. |
Specifications
| Feature | Detail |
|---|---|
| Brand | king of car tuning |
| Model | VDV |
| Item Model Number | VDB |
| Compatibility | Hyundai Santa Fe 2024, 2025, 2026 |
| Material | Aluminum, Plastic, Stainless Steel |
| Exterior Finish | Black Aluminum |
| Color | Black |
| Item Dimensions (L x W x H) | 72.83 x 5.12 x 1.57 inches (approx. 185 x 13 x 4 cm) |
| Weight Limit | 400 Pounds (approx. 181 kg) per side |
| Installation Type | Bolt-on, No Drilling Required |
| Vehicle Service Type | Sport Utility Vehicle (SUV) |
| UPC | 764921973156 |
Warranty and Support
For specific warranty information regarding your King of Car Tuning Black Aluminum Running Boards, please refer to the documentation provided at the time of purchase or contact the seller directly. Warranty terms typically cover manufacturing defects.
If you encounter any issues or require technical assistance, please contact the seller or manufacturer through the platform where the product was purchased. Provide your product model number (VDV) and purchase details for efficient support.