TEEROK T13 Mini Drone User Manual

Introduction

Thank you for purchasing the TEEROK T13 Mini Drone. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new drone. Please read this manual thoroughly before operating the drone to ensure proper use and to maximize your flying experience.

Figure 1: TEEROK T13 Mini Drone, Remote Controller, and Batteries

This image displays the TEEROK T13 Mini Drone, its remote controller, and two modular batteries. The drone is black with white accents, featuring four propellers with protective guards. The remote controller is also black, designed for comfortable grip, with a smartphone holder. Two additional modular batteries are shown separately, highlighting the extended flight time capability.

Package Contents

• TEEROK T13 Mini Drone
• Remote Controller
• Modular Rechargeable Batteries (2 included)
• Spare Propellers Set
• USB Charging Cable
• User Manual (this document)

Setup

1. Battery Installation and Charging

1. Drone Battery: Insert a fully charged modular battery into the battery compartment on the underside of the drone. Ensure it clicks securely into place.
2. Remote Controller Batteries: Open the battery cover on the back of the remote controller and insert 3 AAA batteries (not included), observing the correct polarity. Close the cover.
3. Charging: Connect the drone's modular battery to the USB charging cable. Plug the USB end into a 5V/1A USB adapter (e.g., computer USB port, phone charger). The indicator light on the cable will show charging status. A full charge typically takes 60-80 minutes.

Figure 2: Modular Battery Installation and Flight Time

This image illustrates the modular battery being inserted into the drone. It also includes a graph demonstrating the flight time, indicating that two batteries provide approximately 26 minutes of flight, with each battery offering about 13 minutes.

2. Propeller Installation (if needed)

The drone comes with propellers pre-installed. If replacement is necessary, ensure you match the propellers (A and B) to the correct motor arms as indicated on the drone. Gently push them onto the motor shafts until secure.

3. Connecting to the App (FPV Function)

1. Download the dedicated drone app (refer to the QR code in the quick start guide or search for "TEEROK Drone" in your app store).
2. Turn on the drone. The drone's Wi-Fi signal will become active.
3. On your smartphone, go to Wi-Fi settings and connect to the drone's Wi-Fi network (e.g., "TEEROK-T13-XXXX").
4. Open the drone app. You should see the live video feed from the drone's camera.

Figure 3: FPV Camera with Live Transmission

This image illustrates the drone's FPV (First Person View) camera capability, showing a live video feed being transmitted to a smartphone. The image also depicts two scenarios: a "Camera mode" for taking photos and a "Video mode" for recording footage, emphasizing the drone's multimedia functions.

Operating Instructions

1. Pairing the Drone and Remote Controller

1. Place the drone on a flat, level surface.
2. Turn on the drone. The indicator lights will flash.
3. Turn on the remote controller.
4. Push the left joystick (throttle) all the way up, then all the way down. The drone lights will stop flashing and become solid, indicating successful pairing.

2. Basic Flight Controls

• One-Key Takeoff/Landing: Press the One-Key Takeoff/Landing button (usually marked with an arrow pointing up/down) to automatically launch the drone to a stable hovering height or to land it gently.
• Throttle (Left Joystick):
  • Push up: Drone ascends.
  • Push down: Drone descends.
• Directional Control (Right Joystick):
  • Push up: Drone flies forward.
  • Push down: Drone flies backward.
  • Push left: Drone flies left (sideways).
  • Push right: Drone flies right (sideways).
• Yaw (Left Joystick Left/Right):
  • Push left: Drone rotates counter-clockwise.
  • Push right: Drone rotates clockwise.

Figure 4: Easy Flight Features

This image highlights the user-friendly features of the drone, including "One Key Start/Landing" for simplified takeoffs and landings, "Headless Mode" which eliminates the need to adjust the drone's position before flight, and "Altitude Hold" for stable hovering at a set height, making it easy for beginners to operate.

3. Advanced Flight Features

• Headless Mode: Press the Headless Mode button. In this mode, the drone's orientation is relative to the pilot, regardless of the drone's actual front. This simplifies control for beginners.
• 3D Flips: Press the 3D Flip button, then push the right joystick in any direction to perform a 360-degree flip in that direction. Ensure sufficient altitude before attempting.
• Speed Modes: The drone has three adjustable speed modes (low, medium, high). Press the Speed button to cycle through them. Start with low speed for beginners.

Figure 5: 3D Flips and Speed Modes

This image demonstrates the drone's ability to perform 3D flips, showing the drone mid-air during a rotational maneuver. It also visually represents the three available speed modes, indicating varying levels of flight speed suitable for different skill levels.

4. Camera Operation (720p)

• Photo Capture: While connected to the app, tap the camera icon on the screen to take a photo. Photos are saved directly to your smartphone's gallery.
• Video Recording: While connected to the app, tap the video icon to start recording. Tap again to stop. Videos are saved to your smartphone's gallery in MP4 format.
• FPV View: The app provides a real-time First Person View from the drone's camera, allowing for immersive flight and precise photo/video capture.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the drone body and camera lens. Do not use liquid cleaners.
• Propeller Replacement: If propellers are damaged or bent, replace them with the spare set provided. Ensure correct A/B propeller placement.
• Battery Care:
  • Always use the original charging cable.
  • Do not overcharge or over-discharge batteries.
  • Store batteries in a cool, dry place away from direct sunlight.
  • If not used for a long period, charge batteries to about 50% before storage.
• Storage: Store the drone and remote controller in a cool, dry environment, away from extreme temperatures and direct sunlight.

Figure 6: Drone Protection Features

This image highlights the drone's full range of protection, specifically showcasing the propeller guards designed to prevent damage to the propellers and enhance safety during flight, especially for new users or children. It contrasts this with a scenario lacking such protection.

Troubleshooting

Specifications

Safety Guidelines

• Always operate the drone in open, clear areas, away from people, animals, and obstacles.
• Do not fly near airports, restricted airspace, or sensitive areas.
• Maintain visual line of sight with the drone at all times.
• Do not fly in strong winds or adverse weather conditions.
• Ensure all propellers are securely attached before flight.
• Supervise children when they are operating the drone.
• Do not touch the propellers when they are spinning.
• Turn off the drone and controller when not in use.

Warranty and Support

Specific warranty information for the TEEROK T13 Mini Drone is not provided in this manual. For warranty details, technical support, or replacement parts, please contact the manufacturer directly through their official website or the retailer where the product was purchased.

For further assistance, please refer to the contact information provided on the product packaging or the official TEEROK website.