Introduction
This manual provides comprehensive instructions for the Matbip Wireless Pro Controller, designed for use with Nintendo Switch, Switch Lite, and Switch OLED consoles, as well as PC. It features a unique pink-white design, 6-axis gyro sensor, programmable back buttons, adjustable TURBO function, and 4-level HD vibration. Please read this manual carefully to ensure proper use and maintenance of your controller.
Product Overview
The Matbip Wireless Pro Controller offers an enhanced gaming experience with its ergonomic design and advanced features.
Figure 1: Matbip Wireless Pro Controller (Pink)
Setup and Connection
Compatibility
This wireless controller is compatible with Nintendo Switch, Switch OLED, Switch Lite, and PC platforms. For PC, both wired and Bluetooth connections are supported (X-Input mode).
Figure 2: Multi-compatibility with Switch consoles.
Initial Pairing (Bluetooth)
- On your Switch console, navigate to the Home menu.
- Select the "Controllers" icon.
- Choose "Change Grip/Order" or "Change holding pattern/order".
- On the Matbip controller, press and hold the connection button (usually a small circular button near the USB-C port) for more than 3 seconds until the LED lights flash rapidly.
- The console will detect the controller, and the LED lights on the controller will become solid once successfully paired.
Figure 3: Connection steps for the Matbip Wireless Pro Controller.
One-Key Wake-up Feature
The controller features a one-key wake-up function. Simply press the Home button on the controller to wake up your Switch console from standby mode, allowing for quick entry into your game.
Figure 4: Ultra-fast wake-up and 10m wireless Bluetooth connection.
Operating Instructions
TURBO Function
The TURBO function allows for rapid, continuous button presses.
- Press the TURBO button while inputting the right stick up or down to switch between three speed gears: 5 times/second, 12 times/second, and 20 times/second.
- This feature is particularly useful for games requiring fast, repetitive actions.
Figure 5: TURBO function speed adjustment.
Figure 6: Turbo function and M1/M2 macro settings.
Back Programming Buttons (M1/M2)
The controller features two programmable back buttons (M1 and M2) that allow you to set up to 16 consecutive button actions in one program.
- You can copy other buttons to perform multiple functions simultaneously, enabling "combo techniques" in games.
- Refer to the detailed instructions in the included quick start guide for programming specific macros.
Figure 7: Back Button M1/M2 for macro functions.
Double Vibration and HD Vibration Adjustment
To enhance the immersive gaming experience, the controller includes a 4-step HD vibration adjustment function.
- Adjust the vibration intensity to your preference (0%, 30%, 70%, 100%) to feel collisions and explosions more realistically.
Figure 8: Level 4 High Definition Vibration.
Figure 9: Level 4 HD Vibration and 6-Axis Gyro Sensor.
6-Axis Gyro Sensor
Equipped with a high-sensitivity 6-axis detection system, the controller accurately detects tilt and movement, providing a more immersive gaming experience, especially in motion-controlled games.
Figure 10: 6-Axis Motion Sensor capabilities.
Maintenance
Charging the Controller
The Matbip Wireless Pro Controller has a built-in 600mAh battery.
- A full charge typically takes about 3 hours.
- Once fully charged, the controller can be used continuously for approximately 16-20 hours (usage conditions may vary).
- Use the provided USB-C cable to charge the controller. The charging indicator lights will show the charging status.
Figure 11: Battery life and charging information.
General Care
- Keep the controller clean by wiping it with a soft, dry cloth.
- Avoid exposing the controller to extreme temperatures, humidity, or direct sunlight.
- Do not disassemble the controller, as this may void the warranty.
Troubleshooting
If you encounter any issues with your Matbip Wireless Pro Controller, please refer to the following common solutions:
- Controller not connecting: Ensure the controller is charged. Re-attempt the pairing process as described in the "Initial Pairing" section. Make sure the console's Bluetooth is enabled.
- Input lag or disconnection: Ensure you are within the 10-meter wireless range. Check for potential interference from other wireless devices.
- Buttons unresponsive: Try resetting the controller (refer to the quick start guide for specific reset instructions, if available). Ensure the controller is fully charged.
- Vibration not working: Check the vibration settings on your console and within the game. Ensure the controller's vibration intensity is not set to 0%.
For persistent issues, please contact Matbip customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Matbip |
| Model Number | SW02-Pink |
| Compatibility | Switch/Switch Lite/Switch OLED, PC (wired/Bluetooth X-Input) |
| Battery Capacity | 600mAh |
| Charge Time | Approx. 3 hours |
| Working Time | Approx. 16-20 hours |
| Wireless Range | Up to 10 meters |
| Connectivity | Bluetooth |
| Special Features | 2 Back Programming Buttons, 3-level TURBO, 4-step HD Vibration, 6-axis Gyro Sensor, One-key Wake-up |
| Item Weight | 9.9 ounces |
| Package Dimensions | 6.73 x 4.61 x 2.76 inches |
Warranty and Support
Matbip is committed to providing high-quality products and excellent customer service.
- If you have any questions or require assistance after purchase, please do not hesitate to contact us via email.
- Our customer support team aims to respond to all inquiries within 24 hours.
- Please retain your proof of purchase for warranty claims.
