Tek Styz TS-2050
Tek Styz USB-C to 3.5mm Headphone LED 60W Charging 3.0 Adapter
Model: TS-2050
Introduction
This instruction manual provides detailed information on the setup, operation, and maintenance of your Tek Styz USB-C to 3.5mm Headphone LED 60W Charging 3.0 Adapter. This adapter allows you to simultaneously charge your USB-C device and use a 3.5mm audio jack for headphones or other audio output.
Safety Information
- Keep the adapter away from water and excessive moisture.
- Avoid exposing the adapter to extreme temperatures.
- Do not attempt to disassemble or repair the adapter yourself. Contact support if issues arise.
- Ensure proper ventilation when charging to prevent overheating.
- Use only compatible charging cables and power adapters.
Package Contents
The package contains the following item:
- 1 x Tek Styz USB-C to 3.5mm Headphone LED 60W Charging 3.0 Adapter (Model: TS-2050)

Product Features
- 60W Fast Charging: Supports USB Type-C Power Delivery (PD) fast-charging up to 60W (20V 3A). Features a powerful chip for stable charging voltage and current. Note: It may not support QC for some new phones. We suggest using a PD wall charger for faster charging.
- 2-in-1 Functionality: Divides your USB-C port into a PD-compatible USB-C port for charging and a 3.5mm audio jack for simultaneous audio output. Note: Data transmission and remote control are not supported through the USB-C port.
- Hi-Res Audio DAC Chip: Built-in advanced DAC chip supports digital Hi-Res audio (up to 24bit/96Khz) and is compatible with CTIA and OMTP standards, ensuring stable, high-quality audio transmission without current noise.
- Durability and Portability: Constructed with fiber twisted yarn and a sleek aluminum shell for enhanced durability, capable of withstanding daily bends, twists, and pulls. Its slim design makes it easy to carry.
- Wide Compatibility: Compatible with most Type-C phones, smartphones, tablets, laptops, PCs, HDTVs, and other USB-C devices.


Setup Instructions
- Connect Headset: Plug your 3.5mm headset or audio device into the 3.5mm audio jack on the adapter.
- Connect Charger (Optional): If you wish to charge your device simultaneously, connect your original USB-C charging cable and power adapter to the USB-C port on the adapter.
- Connect to Device: Plug the USB-C connector of the adapter into your compatible USB-C device (phone, tablet, laptop, etc.).
- Initial Connection: For the first-time connection, allow up to 5 seconds for your device to recognize the headset.

Operating Instructions
Once connected, the adapter allows for simultaneous audio output and charging.
- Audio Playback: Audio from your device will be routed through the 3.5mm jack to your connected headphones or speakers.
- Charging: If a charger is connected to the adapter's USB-C port, your device will begin charging. The adapter supports PD 3.0 60W fast charging.
- Note: Data transmission and remote control functions (e.g., volume buttons on headphone cables) are not supported through this adapter. The 3.5mm jack supports most phone, music, and wired control functions, but the USB-C jack only supports charging.



Troubleshooting
If you experience issues with the adapter, try the following steps:
- No Response/Audio:
- Ensure all connections are secure. Disconnect and re-insert the adapter into your device.
- Verify that the ports on your device and the adapter are clean and free of debris.
- Restart your phone or device after re-inserting the adapter.
- If using a phone case, remove it and try connecting the adapter again, as some cases may prevent a full connection.
- Charging Issues:
- Ensure your charging cable and power adapter are functional and compatible.
- For fast charging, use a PD wall charger. Note that the adapter may not support QC for some newer phones.
- Audio Quality Issues:
- Ensure your headphones are fully plugged into the 3.5mm jack.
- Test with different headphones to rule out headphone issues.
Specifications
| Model Number | TS-2050 |
| ASIN | B0D61G3GXC |
| Brand | Tek Styz |
| Product Dimensions | 3 x 0.3 x 0.3 inches |
| Item Weight | 4 ounces |
| Connector Type | Auxiliary, USB Type C |
| Charging Power | Up to 60W (20V 3A) PD 3.0 |
| Audio Output | 24bit/96Khz Hi-Res Audio (DAC) |
| Color | Black |
Compatibility
The Tek Styz USB-C to 3.5mm Headphone LED 60W Charging 3.0 Adapter is designed for wide compatibility with various USB-C devices. Below is a general compatibility guide:
- Compatible Devices: Android phones & tablets, iOS devices (e.g., iPad Pro), Infinix Hot 40i, Mac, Windows PCs, laptops, HDTVs, and other devices supporting USB-C audio output.
- Note: Compatibility may vary by specific device model and operating system version. Refer to your device's specifications for USB-C audio and charging support.

Maintenance
- Cleaning: Use a soft, dry cloth to clean the adapter. Do not use liquid cleaners or solvents.
- Storage: Store the adapter in a cool, dry place when not in use. Avoid tangling the cable excessively.
- Handling: Avoid pulling on the cable directly when disconnecting. Always grasp the connector.
Warranty and Support
This product comes with a lifetime worry-free warranty. If you encounter any problems or have questions, please contact Tek Styz customer service for assistance. Our support team aims for a 12-hour response time.
For customer service, please refer to the contact information provided with your purchase or visit the official Tek Styz website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.