1. Product Overview
The RIGDOO HT-10 Trail Game Camera is an advanced outdoor monitoring device designed for capturing high-resolution photos and videos of wildlife. Featuring 4K video recording and 48MP still image capabilities, it delivers stunning clarity even in challenging conditions. Equipped with night vision, motion activation, and a wide 130-degree angle lens, this camera is built to withstand various outdoor elements with its IP66 waterproof rating.
Its user-friendly design ensures easy setup and operation, making it suitable for wildlife observation, hunting, property security, and surveillance in diverse environments like parks, backyards, and farms.
Figure 1.1: RIGDOO HT-10 Trail Game Camera and included accessories.
2. Safety Information
Please read all safety instructions before using the camera to ensure proper operation and to prevent damage or injury.
- Do not expose the camera to extreme temperatures or direct sunlight for prolonged periods.
- Ensure the battery compartment is securely sealed to maintain the IP66 waterproof rating.
- Use only recommended battery types (AA batteries). Do not mix old and new batteries, or different types of batteries.
- Keep the camera away from strong magnetic fields.
- Do not attempt to disassemble or modify the camera. This will void the warranty.
- Dispose of batteries properly according to local regulations.
- Keep out of reach of children.
3. Package Contents
Verify that all items are present in your package:
- RIGDOO HT-10 Trail Game Camera
- Mounting Strap
- USB Cable
- User Manual (this document)
- 32GB SD Card (pre-installed or separate)
- 4 x AA Batteries (included)
4. Setup Guide
4.1. Battery Installation
The camera requires 4 AA batteries (included). For extended use, 8 AA batteries can be installed. Ensure correct polarity (+/-) when inserting batteries.
- Open the camera's side latches and swing open the front cover.
- Locate the battery compartment at the bottom of the camera.
- Insert 4 or 8 AA batteries, matching the polarity indicators inside the compartment.
- Close the battery compartment cover securely.
4.2. SD Card Installation
A 32GB SD card is included. The camera supports up to 256GB SD cards.
- With the camera open, locate the SD card slot on the side.
- Insert the SD card with the metal contacts facing the back of the camera until it clicks into place.
- To remove, press the card in until it clicks, then release.
4.3. Mounting the Camera
The camera can be mounted to a tree or pole using the included strap.
- Thread the mounting strap through the slots on the back of the camera.
- Secure the camera to a sturdy tree or pole at the desired height.
- Adjust the camera angle to ensure optimal coverage of the target area.
Figure 4.1: Camera mounted for wide-angle observation.
5. Operating Instructions
5.1. Powering On/Off
To power on the camera, slide the mode switch from OFF to TEST or ON. To power off, slide the switch to OFF.
5.2. Menu Navigation (TEST Mode)
In TEST mode, the LCD screen is active, allowing you to adjust settings and view captured media.
- Use the MENU button to access settings.
- Use the UP/DOWN arrows to navigate options.
- Use the OK button to confirm selections.
- Use the SHOT button to manually capture a photo or video.
5.3. Setting Date and Time
It is crucial to set the correct date and time for accurate record-keeping.
- In TEST mode, press MENU.
- Navigate to 'Date/Time' setting.
- Use UP/DOWN to adjust values and OK to move to the next field.
- Press MENU to save and exit.
5.4. Photo and Video Modes
The camera supports various capture modes.
- Mode: Select Photo, Video, or Photo+Video.
- Photo Resolution: Choose from 48MP, 30MP, 20MP, etc. (48MP recommended for highest quality).
- Video Resolution: Choose from 4K (2160P), 2.7K, 1080P, etc. (4K recommended for highest quality).
- Video Length: Set the duration of video recordings (e.g., 10s, 30s, 1min).
Figure 5.1: High-resolution image and video capabilities.
5.5. Motion Detection Settings
The camera features a 0.1s ultra-fast trigger speed for capturing fast-moving subjects.
- PIR Sensitivity: Adjust sensitivity (Low, Medium, High) based on environment to avoid false triggers.
- PIR Interval: Set the delay between consecutive triggers (e.g., 5s, 10s, 30s).
Figure 5.2: Capturing fast-moving wildlife with rapid trigger speed.
5.6. Night Vision Operation
The camera utilizes 48pcs No Glow LEDs for clear night vision up to 100 feet.
Figure 5.3: Enhanced night vision clarity.
5.7. Viewing Files
You can view captured photos and videos directly on the camera's 2.4-inch LCD screen or by connecting to a computer.
- On Camera: In TEST mode, press the PLAY button to enter playback mode. Use UP/DOWN to browse files and OK to play videos.
- On Computer: Connect the camera to your computer using the provided USB cable, or insert the SD card directly into a card reader. The camera will appear as a removable disk.
6. Maintenance
6.1. Cleaning
- Wipe the camera lens and PIR sensor window with a soft, lint-free cloth to ensure clear images and proper motion detection.
- Clean the camera body with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
6.2. Battery Care
- Remove batteries if the camera will not be used for an extended period to prevent leakage.
- Replace all batteries at the same time.
6.3. Storage
- Store the camera in a cool, dry place when not in use.
- Avoid storing in areas with high humidity or extreme temperature fluctuations.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera not powering on | Low or dead batteries; Incorrect battery polarity; Mode switch in OFF position. | Replace batteries; Check polarity; Slide switch to TEST or ON. |
| No photos/videos captured | SD card full or not inserted correctly; Incorrect mode setting; PIR sensitivity too low; Object out of range. | Format or replace SD card; Reinsert SD card; Check mode (Photo/Video); Increase PIR sensitivity; Ensure object is within detection range. |
| Poor image quality at night | Object too far from camera; Lens/LEDs obstructed or dirty; Low batteries. | Ensure object is within 100ft night vision range; Clean lens/LEDs; Replace batteries. |
| Excessive false triggers | PIR sensitivity too high; Camera facing moving branches/grass; Heat sources in detection area. | Decrease PIR sensitivity; Reposition camera to avoid moving objects; Clear detection area of heat sources. |
| Camera screen fogged up | Humidity inside the camera. | Open camera in a dry environment to allow moisture to dissipate. Ensure all seals are clean and properly closed. |
8. Product Specifications
| Feature | Detail |
|---|---|
| Model Name | HT-10 |
| Effective Still Resolution | 48 MP |
| Video Capture Resolution | 2160P (4K) |
| Trigger Speed | 0.1s |
| Viewing Angle | 130 Degrees |
| Night Vision Range | 100 Feet |
| LEDs | 48pcs No Glow LEDs |
| Water Resistance Level | IP66 Waterproof |
| Display | 2.4-inch LCD screen |
| Storage | Supports up to 256 GB Flash Memory (32 GB included) |
| Power Source | Battery Powered (4 AA batteries included, supports 8 AA) |
| Connectivity Technology | USB Type-C |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Dimensions (L x W x H) | 3.4 x 5.2 x 8.2 inches |
| Weight | 1.48 pounds |
9. Warranty and Support
RIGDOO is committed to providing high-quality products and excellent customer service.
- Warranty: The product comes with a 24-month expiration date (warranty period).
- Returns/Replacements: Enjoy hassle-free returns and replacements.
- Customer Service: Professional 7x24 hour support is available for any inquiries or assistance.
For further assistance, please refer to the official RIGDOO website or contact their customer support directly.
Figure 9.1: RIGDOO Customer Support Information.
