Jackery JS-100F
Jackery SolarSaga 100W Bifacial Portable Solar Panel Instruction Manual
Model: JS-100F | Brand: Jackery
Introduction
The Jackery SolarSaga 100W Bifacial Portable Solar Panel is designed to provide efficient and reliable solar power for your outdoor adventures and emergency backup needs. Featuring an innovative dual-sided design, it captures solar energy from both sides, significantly boosting power output. Its durable and portable construction makes it an ideal companion for various Jackery Explorer power stations.

Figure 1: The Jackery SolarSaga 100W Bifacial Portable Solar Panel in its unfolded state, showcasing its dual panels and integrated handles.
Key Features
- Innovative Bifacial Design: Generates solar energy from both sides, increasing overall power output by up to 30%.
- Easy Setup & Kickstand Included: Features two integrated kickstands for quick and stable positioning on any surface. TPE rubber handle for easy carrying.
- Higher Energy Conversion Rate: Utilizes monocrystalline silicon solar cells and multi-layered cell technology for up to 25% conversion efficiency.
- Durable & Splash Proof: ETFE-laminated case with IP68 water-resistant rating protects against rain and dust.
- Compatible & Versatile: Equipped with DC8020/DC7909, USB-A, and USB-C output ports, compatible with various Jackery Explorer power stations (sold separately) and other USB-powered devices.
Setup Guide
- Unfold the Solar Panel: Carefully unfold the SolarSaga 100W panel. The magnetic closures will release easily.
- Position the Kickstands: Locate the two integrated kickstands on the back of the panel. Extend them to prop up the panel, ensuring it faces the sun for optimal exposure.
- Connect to Power Station:
- Open the zippered pouch on the back of the panel to access the charging cables.
- Connect the DC8020 or DC7909 output cable from the solar panel to the corresponding input port on your Jackery Explorer power station.
- Ensure a secure connection. The power station display should indicate incoming wattage.
- Direct Device Charging (Optional): For charging smaller devices directly, use the built-in USB-A (5V/2.4A) or USB-C (5V/3A) ports located within the zippered pouch.

Figure 2: Illustration of the quick and easy setup process for the solar panel in an outdoor setting.
Operating Instructions
Once set up, the Jackery SolarSaga 100W will automatically begin converting sunlight into electricity. Monitor the input wattage on your connected Jackery Explorer power station to ensure optimal charging.
- Optimal Sun Exposure: For maximum efficiency, position the solar panel directly facing the sun. Adjust its angle throughout the day as the sun moves. The built-in mechanism (if available) can help you find the optimal angle.
- Shade Avoidance: Even partial shading of the solar cells can significantly reduce power output. Ensure the entire panel is exposed to direct sunlight.
- Charging Multiple Devices: You can charge a Jackery power station via the DC output while simultaneously charging smaller USB devices using the USB-A and USB-C ports.

Figure 3: The durable and splash-proof design of the Jackery SolarSaga 100W, suitable for various outdoor conditions.
Maintenance
- Cleaning: Keep the solar panels clean for optimal performance. Use a soft brush to remove dust, then wipe with a damp (not wet) cloth. Remove any residue like tree sap as soon as possible.
- Storage: When not in use, fold the solar panel and secure it with the magnetic closures. Store it in a dry, cool place away from direct sunlight and extreme temperatures.
- Water Resistance: The panel has an IP68 water-resistant rating, protecting it from rain and dust. However, the USB ports and connection areas should be kept dry. Avoid submerging the panel in water.
- Handling: Do not bend the panels more than 30 degrees to prevent damage. Keep away from fire and heaters.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low or no power output |
|
|
| Power station not charging |
|
|
Specifications
| Attribute | Detail |
|---|---|
| Brand | Jackery |
| Model Number | JS-100F |
| Output Voltage | 18V (DC) |
| Power Output | 100W |
| Connector Type | DC8020, DC7909, USB-A, USB-C |
| Special Feature | Water Resistant (IP68) |
| Product Dimensions (Folded) | 24 x 21.7 x 1.4 inches |
| Item Weight | 23.6 pounds |
| Cell Type | Monocrystalline Silicon |
| Conversion Efficiency | Up to 25% |
Warranty & Support
The Jackery SolarSaga 100W Bifacial Portable Solar Panel typically comes with a 2-year warranty. For detailed warranty information, product support, or technical assistance, please visit the official Jackery website or contact their customer service directly.
You can also refer to the official Instructions for Use (IFU) PDF document for more comprehensive details: Jackery SolarSaga 100W IFU (PDF)
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







