VoltEdge BX15
VoltEdge BX15 Rechargeable Battery Kit User Manual
Model: BX15 | Brand: VoltEdge
Introduction
The VoltEdge BX15 Rechargeable Battery Kit is designed to provide extended playtime for your Xbox One and Xbox Series X|S controllers, eliminating the need for disposable batteries. This kit offers a convenient and efficient power solution for an uninterrupted gaming experience.
Key Features:
- Up to 20 hours of battery life on a single charge.
- Compatible with Xbox One and Xbox Series X|S controllers.
- Includes a 2-meter (6.5 ft) USB-C charging cable.
- Cost-effective alternative to disposable batteries.
- High-quality construction for reliable performance.

Image: The VoltEdge BX15 Rechargeable Battery Kit in its retail packaging, showcasing the battery and controller compatibility.
Setup Instructions
Follow these steps to install the rechargeable battery in your Xbox controller:
- Identify Components: Unpack the kit and identify the rechargeable battery, the USB-C charging cable, and the two battery covers (one for Xbox One, one for Xbox Series X|S).
- Remove Existing Battery Cover: If your controller has a battery cover, gently press the release tab and slide it off. Remove any existing disposable batteries.
- Insert Rechargeable Battery: Align the VoltEdge rechargeable battery with the battery compartment in your Xbox controller. Ensure the contacts on the battery align with the contacts in the controller. Gently push the battery into place until it clicks securely.
- Attach Correct Battery Cover: Select the appropriate battery cover for your controller model (Xbox One or Xbox Series X|S). Align the cover with the back of the controller and slide it into place until it locks securely.

Image: All components of the VoltEdge BX15 kit, including the green rechargeable battery, two black battery covers (for Xbox One and Xbox Series X|S controllers), and the USB-C charging cable.

Image: A close-up view of the green VoltEdge rechargeable battery correctly inserted into the battery compartment of a black Xbox controller.

Image: The two distinct black battery covers included in the kit, designed to fit either Xbox One or Xbox Series X|S controllers.
Operating Instructions
Charging the Battery:
The VoltEdge BX15 battery can be charged while installed in the controller or separately.
- Connect USB-C Cable: Plug the USB-C end of the included 2-meter cable into the charging port on the battery (or the controller if the battery is installed).
- Connect to Power Source: Plug the USB-A end of the cable into a compatible USB power source, such as an Xbox console, a PC, or a USB wall adapter (not included).
- Charging Indicator: The battery or controller may have an LED indicator that changes color to show charging status (e.g., red for charging, green for fully charged). Refer to your controller's manual for specific LED behavior.
- Charging Time: A full charge typically takes approximately 3 hours.

Image: The 2-meter USB-C to USB-A charging cable provided with the kit, used for recharging the battery.
Usage:
Once fully charged, the battery provides up to 20 hours of continuous gameplay. When the battery level is low, your Xbox console will typically display a low battery warning. Connect the charging cable to continue playing while charging.
Maintenance
- Storage: Store the battery and kit components in a cool, dry place away from direct sunlight and extreme temperatures.
- Cleaning: Use a soft, dry cloth to clean the battery and covers. Do not use harsh chemicals or abrasive cleaners.
- Battery Care:
- Do not disassemble, puncture, or modify the battery.
- Avoid exposing the battery to water or excessive moisture.
- Do not short-circuit the battery terminals.
- Do not dispose of the battery in fire or excessive heat.
- Use only the supplied charging cable or a compatible USB-C cable for charging.
Troubleshooting
- Problem: Battery not charging or heating up during charging.
Possible Causes & Solutions:
- Incorrect Cable/Connection: Ensure the included USB-C cable is securely connected to both the battery/controller and the power source. Try a different USB port or power adapter.
- Faulty Battery/Cable: If the issue persists, the battery or cable may be defective. Contact VoltEdge customer support for assistance.
- Overheating: If the battery becomes excessively hot, immediately disconnect it from the power source. This could indicate an internal issue. Do not attempt to use or charge the battery again and contact support.
- Problem: Short battery life.
Possible Causes & Solutions:
- Incomplete Charge: Ensure the battery is fully charged before use.
- Battery Degradation: Over time, all rechargeable batteries experience degradation. If the battery is old, its capacity may have diminished.
- Environmental Factors: Extreme temperatures can affect battery performance.
- Problem: Battery does not fit controller.
Possible Causes & Solutions:
- Incorrect Controller Model: Ensure your controller is an Xbox One or Xbox Series X|S model. This kit is not compatible with other controller types.
- Improper Installation: Double-check that the battery is aligned correctly with the contacts and pushed firmly into place.
Specifications
| Product Name: | VoltEdge BX15 Rechargeable Battery Kit |
| Model: | BX15 |
| Battery Type: | Lithium Ion |
| Battery Capacity: | 1100 mAh |
| Compatibility: | Xbox One, Xbox Series X|S Controllers |
| Cable Length: | 2 meters (6.5 feet) USB-C |
| Product Dimensions: | 4.5 x 2 x 5.8 cm (1.77 x 0.79 x 2.28 inches) |
| Product Weight: | 200 g (0.44 lbs) |
| Country of Origin: | China |
Warranty and Support
Specific warranty details for the VoltEdge BX15 Rechargeable Battery Kit are not provided in this manual. For warranty claims, technical support, or any product-related inquiries, please contact VoltEdge customer service directly through their official website or the retailer where the product was purchased.
Please retain your proof of purchase for any warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.