1. Introduction
Thank you for purchasing the OKD Luxury 70-inch Fluted Fireplace TV Stand. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
2. Important Safety Information
To ensure safe use of this product, please adhere to the following guidelines:
- Read all instructions thoroughly before assembly and operation.
- Assembly requires two adults. Do not attempt to assemble alone.
- Ensure all electrical connections for the fireplace are secure and plugged into a grounded outlet.
- Do not overload the TV stand. Refer to specifications for weight capacity.
- Keep children and pets away from the assembly area.
- Unplug the electric fireplace from the power outlet before cleaning or maintenance.
- Do not block the air vents of the electric fireplace.
3. Package Contents
Your OKD TV Stand and electric fireplace will be shipped in two separate packages. Please ensure you have received both and all components are present before beginning assembly.
- TV Stand Components (panels, legs, hardware)
- Electric Fireplace Unit
- Electric Fireplace Remote Control
- Assembly Instruction Manual
4. Setup and Assembly
Follow these steps for proper assembly. Clear assembly instructions and labeled parts are provided in the separate assembly guide included with your product.
4.1 Unpacking and Preparation
- Carefully unpack all components on a soft, clean surface to prevent scratches.
- Identify all parts and hardware using the provided parts list in the assembly guide.
4.2 Assembling the TV Stand
- Follow the step-by-step instructions in the dedicated assembly guide to construct the TV stand frame, panels, and doors.
- Ensure all screws and fasteners are tightened securely.
- The storage doors feature soft-closing hinges to prevent pinching.
4.3 Installing the Electric Fireplace
- Once the TV stand structure is complete, carefully insert the electric fireplace unit into its designated central compartment.
- Ensure the fireplace is seated correctly and securely.
4.4 Cable Management
- Utilize the pre-punched holes on the back panel of the TV stand to route and organize cables from your TV and media devices. This helps maintain a neat appearance.
5. Operating Instructions
5.1 Electric Fireplace Operation
The built-in 30-inch electric fireplace provides both ambiance and warmth. It comes with a remote control for convenient operation.
- Power On/Off: Use the power button on the remote control or the fireplace unit to turn the fireplace on or off.
- Flame Effect: The realistic dancing flames and burning logs effect can be operated independently of the heater. Adjust the flame intensity through 4 brightness levels using the remote.
- Heater Function: Activate the heater to provide warmth. The fireplace offers 62°-82°F heating control, capable of heating up to 500 sq. ft. (5000 BTU).
- Timer Setting: Set an automatic shut-off timer for 1 to 8 hours. The unit includes overheating safety protection.
6. Maintenance
6.1 Cleaning the TV Stand
- Wipe surfaces with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, which can damage the finish.
- For the faux marble top, use a non-abrasive cleaner specifically designed for delicate surfaces.
- Periodically check and tighten any loose hardware.
6.2 Electric Fireplace Maintenance
- Ensure the air intake and exhaust vents are kept clear of dust and debris to maintain proper airflow.
- Dust the exterior of the fireplace unit with a soft, dry cloth.
- Do not attempt to open or repair the internal components of the fireplace. Contact customer support for service.
7. Troubleshooting
7.1 Common Issues and Solutions
- Fireplace not turning on: Check if the power cord is securely plugged into a functional wall outlet. Ensure the main power switch on the fireplace is in the 'ON' position.
- No heat from fireplace: Verify that the heater function is activated via the remote or control panel. Check the temperature setting to ensure it is above the current room temperature.
- Remote control not working: Replace the batteries in the remote control. Ensure there is a clear line of sight between the remote and the fireplace's sensor.
- TV Stand instability: Recheck all assembly screws and connections to ensure they are fully tightened. Ensure the stand is placed on a level surface.
8. Product Specifications
| Feature | Detail |
|---|---|
| Brand | OKD |
| Model | B0D5492H2Y |
| Material | Engineered Wood, Faux Marble Top |
| Overall Dimensions (L x W x H) | 70 x 15.2 x 32 inches |
| Fireplace Type | 30-inch Electric Fireplace |
| Heating Area | Up to 500 Sq. Ft. (5000 BTU) |
| Temperature Control | 62°-82°F |
| Timer | 1-8 hours |
| Noise Level | <40dB |
| Weight Capacity (Top Surface) | Approximately 150 lbs |
9. Warranty Information
This product is covered by a manufacturer's warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included in your product packaging or contact OKD customer support directly.
10. Customer Support
For any questions, assistance with assembly, operation, or troubleshooting, please do not hesitate to contact OKD customer support. You can find more information and contact details by visiting the official OKD Store:
