Bissell CrossWave OmniFind Cordless Wet Dry Vacuum

Introduction

The Bissell CrossWave OmniFind is an innovative multi-surface cleaner designed to simplify your cleaning routine by combining vacuuming and mopping into a single, efficient step. This cordless device offers powerful cleaning performance on various floor types, including sealed hard floors and area rugs. Its advanced features, such as FurFinder Headlights and Tangle-Free Technology, ensure a thorough clean while minimizing common maintenance issues.

Figure 1: Bissell CrossWave OmniFind Cordless Wet Dry Vacuum with accessories.

Key Features

• Vacuum & Wash Simultaneously: Efficiently tackles both wet and dry messes in one pass.
• Cordless Freedom: Provides up to 25 minutes of cleaning power without being tied to an outlet.
• FurFinder Headlights: Patented high and low beam LED lights illuminate hidden pet hair and dirt for a more comprehensive clean.
• Tangle-Free Technology: Designed to minimize hair wrap and clogging on the brush roll, ensuring smooth operation.
• Multi-Surface Cleaning: Safely cleans sealed hard floors (wood, laminate, tile) and refreshes area rugs.
• Two Tank Technology: Keeps clean water and cleaning solution separate from dirty water, ensuring you always clean with fresh solution.
• Self-Cleaning Cycle: Cleans the brush roll and inside of the machine with the push of a button, simplifying post-cleaning maintenance.

Figure 2: One machine, twice the clean – vacuum and mop simultaneously.

Figure 3: Multi-surface cleaning capability on hard floors and area rugs.

Figure 4: FurFinder Headlights reveal hidden dirt and pet hair.

Figure 5: Extra-quiet cleaning at 64 dB, ideal for homes with pets or children.

Figure 6: Tangle-free technology prevents hair wrap and minimizes clogs.

Setup

Before first use, ensure the unit is fully charged and the clean water tank is filled with the appropriate solution.

1. Assembly: Attach the handle to the main body of the vacuum until it clicks securely into place.
2. Charging: Place the CrossWave OmniFind on its charging dock. Ensure the power adapter is plugged into a wall outlet. The battery indicator lights on the handle will show charging progress. A full charge provides up to 25 minutes of runtime.
3. Fill Clean Water Tank: The clean water tank is located on the back of the unit. Remove the tank, open the cap, and fill with warm tap water to the indicated water line. Add the recommended amount of BISSELL cleaning formula to the formula line. Close the cap securely and reinsert the tank into the unit.

Figure 7: Enjoy cordless freedom to clean any area of your home.

Figure 8: Clean your entire home on a single charge.

Operating Instructions

The CrossWave OmniFind is designed for intuitive operation, allowing you to easily switch between cleaning modes.

1. Power On: Press the power button on the handle to turn on the unit. The FurFinder Headlights will illuminate.
2. Select Cleaning Mode: Use the mode selection button to choose between Hard Floor mode (for sealed hard surfaces like wood, tile, laminate) and Area Rug mode (for refreshing low-pile area rugs).
3. Recline and Clean: Recline the unit to activate the brush roll and begin cleaning. Move the machine in forward and backward passes over the desired area. The unit automatically dispenses the correct amount of water and fluid for optimal cleaning.
4. Spot Cleaning: For tougher messes, hold the spray trigger for a few seconds to apply more solution, then release and continue cleaning.

Maintenance

Regular maintenance ensures optimal performance and longevity of your CrossWave OmniFind.

1. Self-Cleaning Cycle: After each use, place the unit on its charging dock. Press the self-clean button. The machine will flush debris and freshen the brush roll, cleaning itself automatically.
2. Empty Dirty Water Tank: Once the self-cleaning cycle is complete or the dirty water tank is full, remove it from the unit. Open the tank and dispose of the dirty water and debris. Rinse the tank thoroughly with clean water.
3. Clean Brush Roll & Filter: For deeper cleaning, remove the brush roll cover and the brush roll itself. Rinse the brush roll under running water. The filter can also be rinsed. Allow all components to air dry completely before reassembling. It is recommended to leave the dirty water tank and brush roll cover open while drying to prevent mildew.

Specifications

Troubleshooting

If you encounter issues with your CrossWave OmniFind, refer to the following common solutions:

• No Power: Ensure the unit is fully charged. Check that the charging dock is properly connected to a working power outlet.
• Poor Suction/Cleaning:
  • Check if the dirty water tank is full and needs emptying.
  • Ensure the clean water tank has sufficient solution.
  • Verify that the brush roll is clean and free of debris. Remove and clean if necessary.
  • Check for any clogs in the suction path or nozzle.
• Leaking: Ensure all tanks and covers are securely latched and properly seated. Check for any cracks or damage to the tanks or seals.
• Unpleasant Odor: Thoroughly clean the dirty water tank, brush roll, and brush roll chamber. Allow all components to air dry completely after cleaning to prevent mildew.

Warranty and Support

For warranty information, product registration, or to purchase replacement parts and cleaning solutions, please visit the official Bissell website or contact Bissell customer support. Keep your purchase receipt as proof of purchase for warranty claims.

Protection plans may be available for extended coverage. Please refer to your retailer for details on available protection plans.