NADAMOO Bur3069 and Bur3003 1D Wireless Barcode Scanners User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your NADAMOO Bur3069 1D Wireless Barcode Scanner with Charging Base and the NADAMOO Bur3003 Long Range Wireless Barcode Scanner. These devices are designed for efficient 1D barcode scanning in various environments, offering both wireless and wired connectivity options for compatibility with desktop and laptop systems running Windows or Linux.

2. Package Contents

Please verify that all items listed below are present in your package:

• 1 x NADAMOO Bur3069 1D Wireless Barcode Scanner
• 1 x Charging Base for Bur3069 Scanner
• 1 x NADAMOO Bur3003 Long Range Wireless Barcode Scanner
• 1 x USB Wireless Receiver (for Bur3003)
• 1 x USB Cable (for charging base and wired connection)
• 1 x User Manual (this document)

3. Product Overview

The NADAMOO scanner package includes two distinct 1D wireless barcode scanners, each designed for specific operational needs. The Bur3069 features a convenient charging base, while the Bur3003 offers extended long-range wireless capabilities.

Figure 3.1: Overview of the NADAMOO Bur3069 scanner with its charging base, the Bur3003 scanner, and the USB wireless receiver.

Figure 3.2: The NADAMOO Bur3003 1D Wireless Barcode Scanner shown alongside its dedicated USB wireless receiver.

Figure 3.3: The NADAMOO Bur3069 1D Wireless Barcode Scanner securely docked in its charging base, ready for use or recharging.

4. Setup and Connection

Both scanners offer flexible connectivity options. The Bur3003 primarily uses a 433MHz wireless connection via a USB receiver, while the Bur3069 can connect wirelessly through its base or directly via USB cable.

Figure 4.1: Connection options for the scanners, including 433MHz Wireless via USB dongle and direct USB Wired connection. Compatible with PC and Laptop running Windows or Linux.

4.1. Wireless Connection (Bur3003)

1. Locate the USB wireless receiver included with the Bur3003 scanner.
2. Plug the USB wireless receiver into an available USB port on your desktop or laptop computer.
3. The computer should automatically detect and install the necessary drivers. No manual driver installation is typically required.
4. Power on the Bur3003 scanner. It should automatically pair with the receiver.

4.2. Wireless Connection (Bur3069 with Charging Base)

1. Connect the charging base to your computer using the provided USB cable. The base acts as the wireless receiver for the Bur3069 scanner.
2. Place the Bur3069 scanner into the charging base.
3. The computer should automatically detect and install the necessary drivers for the base.
4. The Bur3069 scanner will automatically pair with its base.

4.3. Wired Connection (Bur3069)

The Bur3069 scanner can also be used in a wired mode:

1. Connect the Bur3069 scanner directly to your computer using the provided USB cable.
2. The scanner will function as a wired device, and the computer will detect it automatically.

5. Operating Instructions

5.1. Basic Scanning

1. Ensure the scanner is powered on and properly connected to your computer (either wirelessly or via cable).
2. Open a text editor, spreadsheet, or any application where you wish the scanned data to appear.
3. Point the scanner's laser beam at the 1D barcode you wish to scan.
4. Press the trigger button on the scanner. A successful scan will typically be indicated by an audible beep and/or a visual confirmation (e.g., LED flash).
5. The barcode data will be transmitted to your computer and appear at the cursor's current position.

5.2. Long Range Transmission (Bur3003)

The Bur3003 scanner is designed for extended wireless transmission distances. The effective range can vary based on environmental factors:

• Under Obstacles Environment: Maximum range of approximately 100 meters (328 feet).
• In Barrier-Free Environment: Maximum range of approximately 400 meters (0.25 miles).

Note: Wireless transmission distance may vary due to building materials, physical objects, and other environmental obstacles.

Figure 5.1: Illustration of the wireless transmission range under different environmental conditions: up to 100 meters with obstacles and up to 400 meters in a barrier-free environment.

6. Maintenance

6.1. Charging the Bur3069 Scanner

To charge the Bur3069 scanner, simply place it into its charging base. Ensure the charging base is connected to a power source via the USB cable. The scanner's indicator light will typically show charging status.

6.2. Battery Life (Both Scanners)

Both scanners are battery-powered. When the battery level is low, the scanner may indicate this with a specific LED pattern or sound. Recharge the scanner promptly to ensure uninterrupted operation.

6.3. Cleaning

To clean the scanner, gently wipe the exterior with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or immerse the device in water. Keep the scanning window clean for optimal performance.

7. Troubleshooting

• Scanner not responding: Ensure the scanner is powered on and fully charged. Verify that the USB receiver (for Bur3003) or charging base (for Bur3069) is securely plugged into the computer's USB port.
• No data transmitted: Check if the scanner is properly paired. For wireless connections, ensure the scanner is within range of its receiver. Confirm that the cursor is active in the target application on your computer.
• Incorrect data scanned: Ensure the barcode is clean and undamaged. Try scanning a different, known good barcode.
• Intermittent connection: Move the scanner closer to its receiver. Avoid sources of strong electromagnetic interference.

8. Specifications

9. Warranty and Support

NADAMOO products are covered by a manufacturer's warranty. For specific warranty details, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official NADAMOO website. Please retain your proof of purchase for warranty claims.