Onerbl AC Power Cord Replacement Manual

1. Introduction

This manual provides essential information for the safe and correct use of your Onerbl AC Power Cord Replacement. This product is designed to replace the original AC input power cord for compatible exercise machines, ensuring reliable power delivery.

Please read these instructions thoroughly before installation and retain this manual for future reference.

2. Safety Information

WARNING: To reduce the risk of electric shock, fire, or injury, always follow these basic safety precautions:

• Ensure the power cord is compatible with your device's power input requirements before connecting.
• Only use the power cord with the specified voltage and current ratings of your appliance.
• Do not use the power cord if it is damaged, frayed, or has exposed wires. Replace immediately.
• Do not modify or attempt to repair the power cord.
• Keep the power cord away from water, heat sources, and sharp objects.
• Always grasp the plug, not the cord, when disconnecting from an outlet or device.
• Ensure the power outlet is easily accessible and properly grounded.
• Unplug the power cord from the wall outlet when not in use for extended periods or during electrical storms.

3. Compatibility

This Onerbl AC Power Cord Replacement is designed for use with various exercise machines that utilize a compatible AC IN power port. Verified compatible models include:

• EILISON KM-818
• EILISON KM-560
• EILISON 521
• EILISON 818
• Fitmax 3D Vibration Plate Exercise Machine
• Fitpro 3D Vibration Plate Exercise Machine
• Other similar Whole Body Workout Vibration Fitness Platforms requiring an AC IN power cord.

If your device is not listed, please verify its power input port type and specifications against the replacement cord before use.

4. Setup and Installation

Follow these steps to correctly install your Onerbl AC Power Cord Replacement:

1. Power Off: Ensure your exercise machine is completely powered off and unplugged from any power source.
2. Remove Old Cord (if applicable): If replacing an existing cord, gently pull the old cord from the machine's AC IN port and from the wall outlet.
3. Connect to Machine: Insert the connector end of the Onerbl AC Power Cord Replacement firmly into the AC IN port on your exercise machine. Ensure it is fully seated.
4. Connect to Power Outlet: Plug the other end of the power cord into a standard, properly grounded AC wall outlet.
5. Secure Cord: Arrange the cord to avoid tripping hazards and ensure it is not pinched or strained.

Image: The Onerbl AC Power Cord Replacement. This image shows the typical design of the replacement power cord, ready for connection to a compatible device and a standard wall outlet.

5. Operating Instructions

Once the Onerbl AC Power Cord Replacement is securely connected to both your exercise machine and a power outlet, you can operate your device as usual. The power cord facilitates the electrical connection required for your machine to function.

• Ensure all connections are snug before powering on your device.
• Refer to your exercise machine's specific user manual for its operational procedures.

6. Maintenance

Proper maintenance extends the life of your power cord and ensures safe operation:

• Cleaning: Disconnect the cord from both the wall and the device before cleaning. Wipe with a dry, soft cloth. Do not use liquid cleaners.
• Storage: When not in use, coil the cord loosely. Avoid tight coiling or bending, which can damage internal wires. Store in a cool, dry place.
• Inspection: Periodically inspect the cord for any signs of damage, such as cuts, fraying, or discoloration. If damage is observed, discontinue use immediately and replace the cord.

7. Troubleshooting

If your device does not power on after connecting the Onerbl AC Power Cord Replacement, consider the following:

• Check Connections: Ensure both ends of the power cord are fully and securely plugged into the device and the wall outlet.
• Verify Power Outlet: Test the wall outlet with another known working appliance to confirm it is supplying power.
• Inspect Cord: Visually inspect the power cord for any visible damage. If damaged, do not use it.
• Device Power Switch: Confirm that the power switch on your exercise machine is in the "ON" position.
• Circuit Breaker: Check your home's circuit breaker panel to ensure no breaker has tripped.

If the issue persists after performing these checks, consult the user manual for your exercise machine or contact a qualified technician.

8. Specifications

Note: Specific current rating and length may vary. Always ensure the replacement cord meets or exceeds the requirements of your device.

9. Warranty and Support

For warranty information or technical support regarding your Onerbl AC Power Cord Replacement, please refer to the retailer or manufacturer's official website where the product was purchased. Keep your proof of purchase for warranty claims.

The manufacturer, Shenzhen Waweis Technology Co., Ltd, is responsible for the product's quality and specifications.