1. Introduction and Safety Information
Thank you for choosing the Eglo Amandolo LED Ceiling Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before proceeding and retain them for future reference.
Important Safety Instructions:
- Always disconnect the main power supply before installation, maintenance, or cleaning to prevent electric shock.
- Installation should be performed by a qualified electrician or a person with appropriate electrical knowledge to ensure compliance with local wiring regulations and safety standards.
- Ensure the mounting surface is structurally sound and can support the weight of the fixture.
- Do not modify the fixture in any way. Unauthorized modifications may void the warranty and pose safety risks.
- Keep packaging materials out of reach of children.
2. Package Contents
Please check that all components are present and undamaged before beginning installation.
- Eglo Amandolo LED Ceiling Light (Model 901116)
- Remote Control
- Mounting Hardware (screws, wall plugs)
- User Manual (this document)
Figure 1: Eglo Amandolo LED Ceiling Light (main unit)
3. Installation Instructions
Follow these steps carefully to install your Eglo Amandolo LED Ceiling Light.
- Prepare for Installation: Turn off the main power supply at the circuit breaker before starting any electrical work. Ensure the power is completely off using a voltage tester.
- Mounting Bracket Installation: Attach the mounting bracket to the ceiling using the provided screws and wall plugs. Ensure the bracket is securely fastened to a joist or suitable anchor point. Use a spirit level to ensure it is straight.
Figure 2: Mounting bracket and light fixture base
- Electrical Connection: Connect the household electrical wires to the terminals on the light fixture. Typically, this involves connecting the live (L), neutral (N), and ground (earth) wires. Ensure all connections are tight and secure. Refer to local electrical codes for proper wiring.
- Attach the Fixture: Carefully align the light fixture with the mounting bracket and secure it in place using the screws provided. Ensure the fixture is flush against the ceiling.
- Restore Power: Once the fixture is securely installed and all connections are checked, restore power at the circuit breaker.
4. Operation
Your Eglo Amandolo LED Ceiling Light is controlled by the included remote control. The remote requires 1 C-type battery (not included).
Remote Control Functions:
Figure 3: Remote Control for Eglo Amandolo LED Ceiling Light
- Power On/Off: Press the Power button to turn the light on or off.
- Brightness Adjustment: Use the + and - buttons to increase or decrease the brightness of the main light.
- Color Temperature Adjustment: The main light (square luminous surface) can be adjusted from warm white to neutral white to cool white. Use the Sun icon (warm) and Snowflake icon (cool) buttons to cycle through or fine-tune the color temperature.
- RGB Backlight Control: The light bar features an RGB backlight. Press the RGB circle icon button to activate and cycle through various RGB colors for indirect lighting.
- Memory Functions (Heart 1 & 2): The remote may include programmable memory buttons (e.g., Heart 1, Heart 2) to save your preferred light settings for quick recall. Consult the remote's specific instructions for programming.
Light Modes:
The main light provides 17 watts of power and 1900 lumens, offering versatile illumination for various environments.
Figure 4: Warm White Light Setting
Figure 5: Cool White Light Setting
The combination of adjustable main light and RGB backlight allows for creating various ambiances, from functional task lighting to decorative mood lighting for living rooms, bedrooms, dining rooms, or hallways.
5. Maintenance
To ensure the longevity and optimal performance of your Eglo Amandolo LED Ceiling Light, follow these maintenance guidelines:
- Cleaning: Disconnect power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the fixture. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- LED Longevity: The integrated LED light sources are designed for long life and are not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced.
- Remote Control: Replace the C-type battery in the remote control when its performance diminishes. Ensure correct polarity when inserting new batteries.
6. Troubleshooting
If you encounter issues with your Eglo Amandolo LED Ceiling Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose wiring; remote control battery depleted. | Check circuit breaker. Verify wiring connections. Replace remote control battery. |
| Light flickers or dims unexpectedly. | Unstable power supply; loose connection; incompatible dimmer switch (if applicable). | Check power supply stability. Tighten wiring connections. Ensure no external dimmer is used if not designed for it. |
| Remote control not responding. | Depleted battery; remote out of range; obstruction between remote and light. | Replace remote control battery. Ensure remote is within effective range and has a clear line of sight to the fixture. |
| RGB backlight not working. | RGB function not activated; internal component issue. | Ensure the RGB button on the remote has been pressed. If the issue persists, contact customer support. |
If these solutions do not resolve the issue, please contact Eglo customer support for further assistance.
7. Specifications
Detailed technical specifications for the Eglo Amandolo LED Ceiling Light (Model 901116).
- Brand: Eglo
- Model Number: 901116
- Product Dimensions: 40 cm (Length) x 20 cm (Width) x 6.5 cm (Height)
- Item Weight: 510 grams
- Material: Metal (Aluminum/Steel)
- Color: White
- Light Source Type: Integrated LED
- Power: 17 Watts
- Luminous Flux: 1900 Lumens
- Color Temperature: Adjustable from Warm White (approx. 2700 Kelvin) to Cool White
- Additional Features: Dimmable, RGB Backlight
- Control: Remote Control
- Power Source: Wired Electric
- Energy Efficiency Class: F (for the contained light source)
Figure 6: Product Dimensions
8. Warranty and Support
Eglo products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or visit the official Eglo website. If you require technical assistance or have questions not covered in this manual, please contact Eglo customer support through their official channels.
Eglo Official Website: www.eglo.com
