Swokely Smart Keyless Entry Fingerprint Door Lock User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Swokely Smart Keyless Entry Fingerprint Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

2. Safety Information

• Ensure all components are present and undamaged before installation.
• Do not attempt to disassemble or repair the lock yourself. Contact qualified personnel for assistance.
• Use only specified battery types (4*AA Batteries, not included).
• Keep physical keys in a secure location outside the property.
• Protect the fingerprint sensor and keypad from excessive force or sharp objects.
• This lock is IP66 waterproof, suitable for outdoor use, but avoid prolonged submersion.

3. Package Contents

Verify that all items listed below are included in your package:

• 1 x Fingerprint Keypad (Outer Panel)
• 1 x Main Lock (Inner Lock)
• 1 x Cylinder
• 1 x Lock Catch
• 1 x Keypad Cover
• 1 x Mounting Screws Bag
• 2 x Card
• 2 x Key

Figure 3.1: All components included in the Swokely Smart Lock package. This image displays the fingerprint keypad, main lock, cylinder, lock catch, keypad cover, mounting screws, two cards, and two physical keys.

4. Specifications

Figure 4.1: Front view of the Swokely Smart Lock, showing the keypad and fingerprint sensor. This image illustrates the sleek design of the outer panel.

Figure 4.2: The inner lock mechanism and the outer keypad unit of the Swokely Smart Lock. This image provides a view of both main parts of the lock system.

Figure 4.3: Detailed dimensions of the inner lock component. This image shows the measurements for the main lock unit.

5. Setup and Installation

The Swokely Smart Lock is designed for surface mount installation. Please follow these steps carefully.

5.1 Pre-Installation Checks

• Ensure your door thickness is compatible with the lock's components.
• Gather necessary tools: screwdriver, drill, measuring tape, pencil.
• Install 4 AA batteries into the inner lock unit. Observe polarity.

5.2 Installation Steps

1. Prepare the Door: Mark the desired position for the lock on your door. This lock is a surface-mount type, meaning it attaches directly to the door surface rather than requiring extensive mortising.
2. Install the Lock Catch: Secure the lock catch to the door frame using the provided screws. Ensure it aligns correctly with the main lock unit.
3. Mount the Inner Lock: Attach the main lock unit (inner lock) to the inside of the door using the mounting screws. Ensure it is level and securely fastened.
4. Mount the Outer Panel: Position the fingerprint keypad (outer panel) on the outside of the door, aligning it with the inner lock. Secure it with the appropriate screws.
5. Connect Components: Connect any necessary cables between the inner and outer units as per the included diagram (if applicable, refer to the quick start guide for detailed wiring).
6. Install Cylinder: Insert the lock cylinder and ensure the physical keys operate smoothly.
7. Test Functionality: After installation, test all unlock methods (key, keypad, fingerprint) to ensure proper operation before closing the door.

Figure 5.1: The Swokely Smart Lock installed on a door, showing both the exterior keypad and the interior lock mechanism. This image demonstrates the lock's appearance when mounted.

6. Operating Instructions

Your Swokely Smart Lock offers multiple convenient ways to unlock your door.

6.1 Fingerprint Unlock

• Enrollment: Refer to the Tuya App instructions for adding new fingerprints. Typically, this involves placing your finger on the sensor multiple times from different angles.
• Unlocking: Place your enrolled finger firmly on the fingerprint sensor. The lock will unlock within approximately 0.5 seconds if the fingerprint is recognized.

Figure 6.1: Illustration of the fingerprint unlock process, highlighting the speed and accuracy of the sensor. This image shows a finger being placed on the sensor for quick access.

6.2 Password Unlock

• Setting Passwords: Manage and set passwords through the Tuya App.
• Unlocking: Enter your registered password on the keypad, then press '#'. The lock will unlock.

6.3 Card Unlock

• Enrollment: Add new cards via the Tuya App.
• Unlocking: Present an enrolled card to the card reader area on the outer panel. The lock will unlock.

Figure 6.2: Demonstrates the smart card unlock method, showing a card being held near the sensor on the keypad. This feature is convenient for users who prefer not to use fingerprints or passwords.

6.4 Key Unlock

• Insert the physical key into the keyhole located on the outer panel and turn to unlock. This serves as a backup method.

Figure 6.3: Close-up view of the keyhole for manual unlocking and the Type-C port for emergency power. This image highlights the physical backup options available.

6.5 Tuya App Remote Control

• Download App: Download the Tuya Smart app from your device's app store.
• Pairing: Follow the in-app instructions to pair your smart lock with the Tuya app via Wi-Fi.
• Remote Unlock/Management: Once paired, you can remotely unlock the door, manage user access (add/delete fingerprints, passwords, cards), view access logs, and receive notifications from anywhere.

6.6 Automatic Locking

• The lock is equipped with a locked inductor. After the door is closed, the lock will automatically engage.

Figure 6.4: Details of the locked inductor for automatic closing and the indoor knob for manual operation from inside. This image clarifies the internal mechanisms.

7. Maintenance

• Battery Replacement: The lock features a low power reminder. When the battery level is low, replace all four AA batteries promptly.
• Emergency Power: If batteries deplete completely, connect a Type-C cable to the emergency power port on the outer panel to temporarily power the lock and gain access.
• Cleaning: Wipe the lock's surface with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
• Fingerprint Sensor: Keep the fingerprint sensor clean and dry for optimal performance.

8. Troubleshooting

9. Support

For further assistance, technical support, or warranty inquiries, please refer to the contact information provided with your purchase or visit the official Swokely website.