KRPTQJoo Joo3616

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

KRPTQJoo Replacement Remote Control Instruction Manual

Model: Joo3616 | Brand: KRPTQJoo

Introduction

This manual provides instructions for the KRPTQJoo Replacement Remote Control, Model Joo3616, designed for various BGH and Midea room air conditioner units. This infrared remote control operates exclusively with temperature displayed in Celsius. It serves as a direct replacement or spare for compatible models, offering essential functions for managing your air conditioning system.

Front view of the KRPTQJoo replacement remote control

Image: Front view of the KRPTQJoo replacement remote control, showing the display screen and all buttons.

Setup

Battery Installation

To begin using your remote control, install two AAA batteries. Ensure correct polarity (+/-) as indicated inside the battery compartment.

  1. Slide open the battery compartment cover on the back of the remote control.
  2. Insert two new AAA batteries, matching the positive (+) and negative (-) terminals correctly.
  3. Close the battery compartment cover securely.
Back view of the remote control with battery cover removed

Image: Back of the remote control with the battery cover removed, revealing the two AAA battery slots.

Operating Instructions

The remote control features several buttons for managing your air conditioner's functions. Point the remote directly at the air conditioner's receiver when operating.

Angled view of the remote control with screen on

Image: Angled view of the remote control, showing the illuminated screen and various function buttons.

  • ON/OFF: Powers the air conditioner unit on or off.
  • TEMP +/-: Adjusts the desired temperature setting in Celsius.
  • MODE: Cycles through available operating modes such as Cool, Heat, Fan, Dry, or Auto.
  • SILENCE FP: Activates or deactivates the silent operation mode or 'Follow People' function (if supported by the AC unit).
  • FAN SPEED: Adjusts the fan speed (e.g., Auto, Low, Medium, High).
  • SWING (vertical): Controls the vertical louver swing for air direction.
  • SWING (horizontal): Controls the horizontal louver swing for air direction.
  • TIMER ON/OFF: Sets or cancels the timer for automatic power on/off.
  • SLEEP FRESH: Activates or deactivates sleep mode or a fresh air function.
  • INTELLIGENT EYE: Activates or deactivates the intelligent eye sensor (if supported by the AC unit) for energy saving.
  • TURBO SELF CLEAN: Activates turbo mode for rapid cooling/heating or initiates a self-clean function.
  • LED FOLLOW ME: Activates or deactivates the 'Follow Me' function, where the remote acts as a temperature sensor.
  • LOCK RESET: Locks the remote control settings to prevent accidental changes or resets the unit.

Maintenance

Battery Replacement

Replace batteries when the display dims, the remote becomes unresponsive, or the operating range decreases. Always use new AAA batteries and dispose of old batteries responsibly according to local regulations.

Cleaning

Wipe the remote control with a soft, dry cloth. Avoid using liquid cleaners, abrasive materials, or chemical solvents, as these can damage the remote's surface or internal components.

Troubleshooting

  • Remote not responding:
    • Check battery installation and ensure correct polarity.
    • Replace batteries with new ones.
    • Ensure there are no obstructions between the remote control and the air conditioner's infrared receiver.
    • Verify the remote is pointed directly at the air conditioner unit.
  • Short operating range:
    • Replace batteries with new ones.
    • Ensure the remote's infrared emitter and the AC unit's receiver are clean and unobstructed.

Compatibility

This remote control is compatible with the following BGH and Midea air conditioner models. This list may not be exhaustive. If your model is not listed, please contact support for verification.

Compatible BGH Models:

  • BSE23CIP, BSE45CI, BSE30CHX1, BSE30CI, BSE23CHX1, BSE23CI, BSE30CIP, BSE45CHX1, BSE45CIP, BSE60CHX1, BSE60CI, BSE60CIP

Compatible Midea Models:

  • RG36C/BG(C)E, RG36B3/BGE, MCD-24HRN1-Q, MCD-36HRN1-Q, MCD-48HRN1-Q, RG36B(1)/BG(C)E, RG36A2/BG(C)E, RG36B/BGE, RG36F/BGEF, RG36C/BGE, RG36A/BGEF-AR3, RG36B/BGCE, RG36A/BGEF, MUE-12HRN1-Q, MUE-18HRN1-Q, MUE-24HRN1-Q, MUE-36HRN1-Q, MUE-48HRN1-Q, MCD-18HRN1-Q

Other Compatible Models:

  • CHQZ-36-4X9WM, CH5Z-48-5X12WM, CH5Z-48-5X9WM, CHTZ-48-3X18WM, CHTZ-36-3X12WM, CHTZ-27-3X9WM, CHDZ-27-2X9WM, CHDZ-27-9-12WM

Specifications

FeatureDetail
BrandKRPTQJoo
Model NumberJoo3616
ColorGrey
Connectivity TechnologyInfrared
Maximum Range8 meters
Number of Supported Devices1
Power Source2 AAA batteries (not included)
DisplayCelsius Only
Special FeaturesErgonomic design
Compatible DevicesAir Conditioner

Warranty

This product comes with a 90-day warranty. Hassle-free returns are available within this period. Please retain your proof of purchase for warranty claims.

Support

For any questions, concerns, or assistance with your remote control, please contact the seller directly through the platform where the purchase was made. When contacting support, please provide your air conditioner's device model for prompt compatibility verification and troubleshooting assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.