1. Introduction
Thank you for choosing the EUGAD 4-Tier 360° Rotating Bookshelf. This instruction manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read it thoroughly before beginning assembly and retain it for future reference.
Image 1.1: The EUGAD 4-Tier 360° Rotating Bookshelf in a living room setting, showcasing its compact design and storage capacity.
2. Safety Information
To ensure safe use and prevent damage, please observe the following guidelines:
- Weight Capacity: The recommended total weight capacity for this bookshelf is 60 kg (132 lbs). Each individual shelf has a maximum capacity of 10 kg (22 lbs). Do not exceed these limits to prevent structural failure and potential injury.
- Assembly: Assemble the unit on a soft, clean surface to avoid scratches. Ensure all components are securely fastened according to the provided instructions.
- Stability: This is a freestanding unit. While designed for stability, avoid placing excessively heavy items on the top tier.
- Child Safety: Keep small parts away from children during assembly. The rounded edges and anti-fall panels are designed for safety, but adult supervision is recommended around the unit, especially with young children.
- Placement: Place the bookshelf on a level surface to prevent wobbling.
3. Package Contents
Before assembly, verify that all parts listed in the included accessory kit are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Bookshelf panels (numbered)
- Metal rotating base
- Assembly hardware (screws, dowels, etc.)
- Illustrated assembly instructions
4. Setup and Assembly
The EUGAD Rotating Bookshelf requires self-assembly. Follow the detailed, illustrated instructions provided in the package. The unit can be customized to 1, 2, 3, or 4 tiers based on your needs.
- Preparation: Clear a spacious area and lay out all components on a soft, clean surface to prevent scratches. Identify all numbered parts and hardware.
- Base Assembly: Attach the metal rotating base to the bottom panel of the bookshelf. Ensure it is centered and securely fastened.
- Tier Assembly: Begin assembling the tiers from the bottom up, following the numerical order in the instructions. Each tier consists of multiple compartments with anti-fall panels.
- Connecting Tiers: Securely connect each tier to the one below it using the provided hardware. Ensure all connections are tight and stable.
- Final Check: Once all tiers are assembled, gently lift and place the bookshelf in its desired location. Verify that it stands level and all connections are secure.
5. Operating Instructions
The EUGAD Rotating Bookshelf features a 360° rotation for easy access to your items.
Image 5.1: The metal rotating base ensures smooth and silent 360° rotation.
- Rotation: The metal rotating base allows the bookshelf to spin 360 degrees smoothly and silently. Gently push the bookshelf to the right or left to rotate it and access items from any side.
- Storage: Utilize the 16 compartments across 4 levels to store and display books, toys, picture frames, and decorative items. The anti-fall panels help keep items secure.
6. Maintenance
Proper care will extend the life and appearance of your bookshelf.
Image 6.1: The E1 engineered wood with veneer is designed to be wear-resistant, scratch-resistant, and easy to clean.
- Cleaning: Wipe the bookshelf with a soft, dry cloth. For stubborn marks, a slightly damp cloth followed by a dry cloth can be used. Avoid harsh chemicals or abrasive cleaners.
- Spills: Immediately wipe up any spills to prevent water damage to the engineered wood.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or discoloration of the wood finish.
7. Troubleshooting
If you encounter any issues with your bookshelf, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bookshelf wobbles | Uneven floor; loose connections | Move to a level surface. Check and tighten all assembly screws. |
| Rotation is stiff or noisy | Dust in the rotating mechanism; excessive weight | Clean around the base. Reduce the load on the bookshelf, ensuring it does not exceed weight limits. |
| Items fall off shelves | Overloaded shelves; items not placed correctly | Ensure shelves are not overloaded. Utilize the anti-fall panels by placing items within their protective boundaries. |
8. Specifications
Image 8.1: Detailed dimensions of the 4-tier rotating bookshelf.
- Brand: EUGAD
- Model Number: 0045SHG
- Material: E1 Engineered Wood
- Color: Light Oak
- Overall Dimensions (Diameter x Height): 44 cm x 127.4 cm (approx. 17.3 x 50.2 inches)
- Shelf Thickness: 18 mm
- Number of Tiers: 4 (customizable)
- Number of Compartments: 16 (4 per tier)
- Total Weight Capacity: 60 kg (132 lbs)
- Weight Capacity per Shelf: 10 kg (22 lbs)
- Item Weight: 20.7 kg (45.6 lbs)
- Mounting Type: Floor Standing, Freestanding
- Special Features: 360° Rotation, Space-saving, Anti-fall panels, Rounded edges
- Recommended Use: Living Room, Bedroom, Study, Children's Room, Office
9. Warranty and Support
EUGAD products are designed for quality and durability. For warranty information, product support, or to report missing/damaged parts, please contact your retailer or the EUGAD customer service department. Please have your model number (0045SHG) and purchase details ready when contacting support.
You can often find contact information on the retailer's website or within your purchase documentation.