VOLT PLUS TECH XG01

VOLT PLUS TECH XG01 Wireless Bluetooth 5.3 Earbuds User Manual

Model: XG01

Introduction

Thank you for choosing the VOLT PLUS TECH XG01 Wireless Bluetooth 5.3 Earbuds. This manual provides essential information for setting up, operating, and maintaining your new earbuds. Designed for high-quality audio and clear communication, these earbuds feature Bluetooth 5.3 technology, noise isolation, and intuitive touch controls. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.

Package Contents

Verify that all items listed below are included in your package:

  • 2 x Wireless Earbuds
  • 1 x USB-C Charging Cable
  • 3 x Pairs of Ear Adapters (Small, Medium, Large)
  • 1 x Portable Charging Case
  • 1 x User Manual (this document)

Product Overview

The VOLT PLUS TECH XG01 earbuds are designed for comfort and performance, featuring a compact design and a portable charging case.

Earbud fitted in a human ear

Figure 1: Ultra-small and lightweight earbud design for a comfortable and secure fit.

The charging case not only protects your earbuds but also provides extended battery life, offering up to 24 hours of total playback time.

Open charging case with earbuds inside, showing 'Up to 24 Hrs Total Playback'

Figure 2: The charging case provides up to 24 hours of total playback time for the earbuds.

The compact charging case features a 300 mAh battery for efficient charging.

Closed charging case with 'VOLT+ tech' logo and 'Super Fast 300 mAh Charging Case'

Figure 3: The portable charging case with a 300 mAh capacity for quick recharges.

These earbuds are compatible with a wide range of Bluetooth-enabled devices, including smartphones, tablets, and computers.

Earbuds with wireless signal icons and logos for Apple, Android, and Windows devices, plus images of MP3 players, smartphones, and tablets

Figure 4: Broad compatibility with various operating systems and devices.

The earbuds and charging case are designed to be compact and portable.

Dimensions of the earbuds and charging case shown next to a smartphone

Figure 5: Physical dimensions of the earbuds and charging case.

Setup

1. Charging the Earbuds and Case

Before first use, fully charge the charging case and earbuds.

  1. Connect the provided USB-C charging cable to the charging port on the case and to a USB power source.
  2. The indicator lights on the case will show the charging status. A full charge for the case typically takes about 1 hour.
  3. Place the earbuds into the charging slots inside the case. They will automatically begin charging.

2. Initial Pairing with a Device

Follow these steps to pair your earbuds with your Bluetooth-enabled device:

  1. Remove both earbuds from the charging case. They will automatically power on, indicated by a blue light.
  2. Wait for the voice prompt "Pairing, Left Channel, Right Channel." This confirms the earbuds are synced with each other.
  3. On your smartphone, tablet, or computer, navigate to the Bluetooth settings.
  4. Ensure Bluetooth is enabled and search for new devices.
  5. Select "XG01" from the list of available devices to connect.
  6. Once connected, the earbuds will flash blue every 8 seconds, indicating a successful connection.
Smartphone screen showing 'M2 Connected' and a charging case with earbuds

Figure 6: Automatic pairing with Bluetooth v5.3 technology.

Operating Instructions

The VOLT PLUS TECH XG01 earbuds feature intuitive touch controls for various functions.

Diagram showing various features including smooth touch control, IPX4 sweat resistance, ergonomic design, and super bass sound effect

Figure 7: Overview of earbud features including touch control and water resistance.

Power On/Off

  • Power On: Remove the earbuds from the charging case. They will automatically power on.
  • Power Off: Place the earbuds back into the charging case. They will automatically power off and begin charging.

Music Playback

  • Play/Pause: Tap the multifunctional touch button on either earbud once.

Call Management

  • Answer/End Call: Tap the multifunctional touch button on either earbud once.
  • Reject Call: Press and hold the multifunctional touch button on either earbud for 2 seconds.
People using earbuds in various scenarios, including driving and cycling

Figure 8: Earbuds enable hands-free communication, such as answering calls while driving.

Voice Assistant Activation

  • Activate Voice Assistant (Google Assistant, Siri, Alexa): Triple-tap the multifunctional touch button on either earbud.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your earbuds.

  • Cleaning: Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth. Avoid using abrasive materials, solvents, or chemical cleaners.
  • Storage: When not in use, always store the earbuds in their charging case to protect them from dust, damage, and to keep them charged.
  • Water Resistance: The earbuds are rated IPX4 water resistant, meaning they are protected against splashing water from any direction. They are not designed for submersion in water. Avoid exposing them to heavy rain, showering, or swimming. Ensure the charging port is dry before charging.
  • Temperature: Avoid exposing the earbuds and charging case to extreme temperatures (hot or cold) or high humidity.

Troubleshooting

If you encounter any issues with your VOLT PLUS TECH XG01 earbuds, refer to the following common solutions:

  • Earbuds not pairing or connecting:
    • Ensure both earbuds and the charging case are fully charged.
    • Make sure Bluetooth is enabled on your device.
    • Turn off Bluetooth on your device, then turn it back on.
    • On your device's Bluetooth settings, "forget" or "unpair" the "XG01" and then attempt to pair again.
    • Place the earbuds back into the charging case, close the lid, wait a few seconds, then remove them to initiate pairing mode again.
  • No sound from earbuds:
    • Check the volume level on your connected device.
    • Ensure the earbuds are properly connected to your device.
    • Try playing audio from a different application or source.
  • Earbuds not charging:
    • Verify that the USB-C charging cable is securely connected to both the charging case and the power source.
    • Ensure the power source is functional.
    • Check that the earbuds are correctly seated in their charging slots within the case.
    • Clean the charging contacts on both the earbuds and the case with a dry cotton swab.
  • One earbud not working:
    • Ensure both earbuds are charged.
    • Place both earbuds back into the charging case, close the lid, and then remove them together to re-establish the connection between them.
    • Try re-pairing the earbuds with your device.

Specifications

Model NameXG01
Bluetooth Version5.3
Wireless Communication TechnologyBluetooth
Connectivity TechnologyWireless (USB-C for charging)
Ear PlacementIn Ear
Noise ControlActive Noise Cancellation
Control MethodTouch
Battery Life (Earbuds + Case)Up to 24 Hours
Charging Time (Case)Approximately 1 Hour
Water Resistance LevelIPX4 (Water Resistant)
Item Weight4 Ounces (total)
Product Dimensions (Earbud)Approx. 0.9 x 0.5 inches
Product Dimensions (Charging Case)Approx. 3.6 x 1.4 x 1.3 inches
Compatible DevicesAndroid, iOS, Mac, Tecno Pop 8, Windows (Bluetooth 4.0+ compatible)
Included Components2 Earbuds, 1 Charging Cable, 3 Ear Adapters, Power Bank Case, Instructions

Warranty Information

For detailed warranty information, please refer to the product packaging or visit the official VOLT PLUS TECH website. Keep your proof of purchase for any warranty claims.

Customer Support

If you have any questions, require technical assistance, or need further support, please contact VOLT PLUS TECH customer service. Contact details can typically be found on the product packaging or the official brand website.

Related Documents - XG01

Preview JLab JBuds Air Executive Wireless Earbuds User Manual
Comprehensive guide for JLab JBuds Air Executive wireless earbuds, covering initial setup, Bluetooth pairing, controls, equalizer modes, charging, fit, troubleshooting, and care instructions.
Preview boAt Airdopes 71: TWS Wireless Earbuds User Manual & Specifications
Comprehensive guide to the boAt Airdopes 71 True Wireless Stereo (TWS) earbuds. Learn about features like BEAST™ Mode, ENx™ Tech, IWP™, pairing, charging, basic functions, and specifications.
Preview JLab GO Air Pop True Wireless Earbuds: Setup, Features, and Troubleshooting Guide
A comprehensive guide to setting up, using, and troubleshooting your JLab GO Air Pop true wireless earbuds. Covers Bluetooth pairing, button functions, EQ modes, charging, placement, and general care instructions.
Preview AUKEY EP-B52 Foldable On-Ear Wireless Headphones User Manual
User manual for AUKEY EP-B52 Foldable On-Ear Wireless Headphones. Learn about setup, pairing, controls, specifications, troubleshooting, and care instructions.
Preview JLab JBuds Air Icon Wireless Earbuds: User Guide and Setup
Comprehensive guide for JLab JBuds Air Icon wireless earbuds, covering initial setup, Bluetooth pairing, button functions, EQ modes, charging, fitment, and troubleshooting. Learn how to get the most out of your audio experience.
Preview Tranya F1 True Wireless Earbuds User Manual - Setup, Charging, and Controls
Comprehensive user manual for Tranya F1 True Wireless Earbuds. Learn how to connect, charge, use button controls, reset, and troubleshoot common issues. Includes package contents and manufacturer information.