PRO Touch Wireless Earbuds User Manual

Introduction

Thank you for choosing the VOLT PLUS TECH PRO Touch Wireless Earbuds. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your new earbuds. Please read this manual carefully before use to ensure optimal performance and longevity of your device.

Image: The PRO Touch Wireless Earbuds, showcasing their sleek design within the charging case, with the digital LED display clearly visible.

Setup

Getting Started

1. Unboxing: Carefully remove the earbuds, charging case, USB-C cable, and extra ear tips (S, M, L) from the packaging.
2. Initial Charge: Before first use, fully charge the charging case and earbuds. Connect the USB-C cable to the charging port on the case and to a power source. The LED display on the case will indicate the charging status.

Pairing with Your Device

Image: The earbuds removed from their case, positioned next to a smartphone displaying its Bluetooth settings, ready for pairing.

1. Power On: Remove the earbuds from the charging case. They will automatically power on, and a blue indicator light will confirm. If they do not power on automatically, press and hold the touch area on each earbud for 3-5 seconds until the blue indicator light flashes.
2. Activate Bluetooth: On your smartphone or device, navigate to the Bluetooth settings and ensure Bluetooth is turned on.
3. Search and Connect: In the list of available Bluetooth devices, search for "YD03". Select "YD03" to pair.
4. Confirmation: Once connected, the earbuds will provide an audible prompt stating "Connected". You are now ready to use your earbuds.

Operating Instructions

Touch Controls

The PRO Touch Wireless Earbuds feature intuitive touch controls for easy management of your audio and calls.

Image: A detailed view of an earbud, illustrating the touch-sensitive area and its corresponding functions for music playback, call management, and voice assistant activation.

• Play/Pause Music: Single tap on either earbud.
• Next Song: Double tap the right earbud.
• Previous Song: Double tap the left earbud.
• Answer/End Call: Single tap on either earbud during an incoming call or active call.
• Reject Call: Press and hold either earbud for 2 seconds during an incoming call.
• Activate Voice Assistant (Siri/Google Assistant): Press and hold the left earbud for 1 second.
• Volume Adjustment: Specific touch gestures for volume control are not detailed in the product description. Please refer to your device's volume controls or experiment with long presses on the earbuds if available.

Single Earbud Mode

The earbuds support complete binaural separation, allowing you to use either the left or right earbud independently. Simply remove one earbud from the case, and it will connect to your device. The other earbud can remain in the case or be used later for stereo sound.

Maintenance

Charging the Earbuds and Case

Image: The earbuds resting in their charging case, which is connected via a USB-C cable to a power adapter, indicating the charging process.

• Earbud Charging: Place the earbuds into the charging case. They will automatically begin charging. The LED display on the case will show the charging status of each earbud.
• Case Charging: Connect the provided USB-C cable to the charging port on the case and to a 5V/1A power adapter (not included). The digital LED display will show the battery percentage of the case.
• Battery Life: The earbuds provide over 5 hours of playback on a single charge. The 2,000mAh charging case provides an additional 20+ hours of charge, totaling over 25 hours of use.
• Important Note: The earbuds are IPX3 water-resistant, but the charging case is NOT waterproof. Avoid exposing the charging case to water or excessive moisture.

Cleaning and Storage

• Cleaning: Use a soft, dry, lint-free cloth to clean the earbuds and charging case. Do not use harsh chemicals or abrasive materials.
• Ear Tips: Regularly remove and clean the ear tips with a damp cloth and mild soap, then dry thoroughly before reattaching.
• Storage: When not in use, store the earbuds in their charging case to protect them and keep them charged. Store in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

If you encounter any issues with your PRO Touch Wireless Earbuds, please refer to the following common solutions:

• Earbuds Not Powering On: If the earbuds do not automatically power on when removed from the case, ensure the case is charged. Then, press and hold the touch area on each earbud for 3-5 seconds until the blue indicator light flashes.
• Earbuds Not Pairing:
  • Ensure Bluetooth is enabled on your device.
  • Make sure the earbuds are fully charged.
  • Turn off Bluetooth on your device, then turn it back on.
  • Forget "YD03" from your device's Bluetooth list and attempt to pair again.
  • Restart both your device and the earbuds.
• No Sound or Intermittent Sound:
  • Check the volume level on both your earbuds and your connected device.
  • Ensure the earbuds are within the Bluetooth range (typically 10 meters/33 feet) of your device.
  • Try resetting the earbuds by placing them back in the charging case, closing the lid for a few seconds, and then taking them out again.
• Charging Case Not Charging:
  • Verify that the USB-C cable is securely connected to both the case and the power source.
  • Try using a different USB-C cable or power adapter.
  • Ensure the power outlet is functional.

If these steps do not resolve your issue, please contact customer support.

Specifications

Warranty Information

Specific warranty details are not provided in the product description. Please refer to the product packaging or contact the retailer/manufacturer for warranty terms and conditions.

Customer Support

For further assistance, technical support, or inquiries, please contact VOLT PLUS TECH customer service through the retailer's platform or the contact information provided with your purchase.