daphino Non-Remote

daphino 2500LM Solar Lights Outdoor with Motion Sensor

Instruction Manual for Model: Non-Remote

1. Introduction

Thank you for choosing the daphino 2500LM Solar Lights. This manual provides essential information for the proper installation, operation, and maintenance of your new solar-powered security lights. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

Two daphino 2500LM Solar Lights with three adjustable heads and a solar panel on top.

Image: Two daphino 2500LM Solar Lights, showcasing their design with a central motion sensor and adjustable side panels.

2. Product Overview

2.1 Package Contents

  • 2 × Solar Light Units
  • 2 × Wall Brackets
  • 4 × Plastic Anchors
  • 4 × Screws
  • 1 × Instruction Manual

2.2 Key Features

  • Super Bright Illumination: Up to 2500LM 6500K output with newly upgraded LEDs for wide light emission.
  • Adjustable Design: Solar panel independently adjustable by 90°, and left/right light heads independently adjustable by 90°, providing up to 355° illumination angle.
  • Advanced Motion Sensor: Built-in microwave sensor chip with high sensitivity, detecting movement up to 40 ft.
  • Durable & Weatherproof: IP65 waterproof rating, designed to withstand various weather conditions (frost, rain, heat).
  • Long Working Time: Equipped with a high-capacity lithium-ion battery for extended operation, even on cloudy days.
  • Energy Efficient: Features an optimized fiber-reinforced laminated solar panel for improved conversion efficiency.
Diagram showing solar energy charging during the day, automatic light activation at night, working temperature range, and resistance to frost, IP65 waterproof, and heat.

Image: Illustration of the solar light's functionality, including daytime charging, nighttime operation, temperature resilience, and IP65 waterproof rating.

Illustration of the solar light mounted on a wall during a rainstorm, highlighting its waterproof and anti-leakage design.

Image: The solar light demonstrating its fully enclosed, water-resistant design during inclement weather.

3. Installation

Follow these steps for proper installation of your daphino solar lights:

  1. Choose a Location: Select a location that receives direct sunlight for at least 6-8 hours daily to ensure optimal charging. A recommended installation height is approximately 8 feet (2.4 meters).
  2. Mark Drill Points: Use the wall bracket to mark the positions for drilling holes.
  3. Drill Holes and Insert Anchors: Drill holes at the marked positions. Insert the plastic anchors into the drilled holes.
  4. Mount the Bracket: Secure the wall bracket to the wall using the provided screws.
  5. Attach the Light: Hang the solar light unit onto the mounted bracket, ensuring the solar panel is facing upwards to maximize sun exposure.
  6. Adjust Panels: Adjust the angle of the solar panel and the three light heads to achieve the desired illumination area.
Diagram illustrating the four steps of installing the solar light: choosing a location, marking screw points, installing the bracket, and hanging the light.

Image: Step-by-step visual guide for installing the solar light, including recommended height and solar panel orientation.

Close-up view of the daphino solar light with its mounting bracket, ready for installation.

Image: The solar light unit detached from its mounting bracket, showing the components involved in installation.

4. Operating Instructions

The daphino solar light features three distinct operating modes. To select a mode, locate the button on the back of the light unit and press it to cycle through the options.

4.1 Lighting Modes

  • Mode 1: Motion Sensor Full Brightness
    The light remains off until motion is detected. Upon detection, the light turns on at 100% brightness for approximately 30 seconds, then turns off.
  • Mode 2: Dim Light All Night + Motion Sensor Full Brightness
    The light stays on at a continuous 30% brightness throughout the night. When motion is detected, it brightens to 100% for approximately 30 seconds, then returns to 30% brightness.
  • Mode 3: Low Light All Night + Motion Sensor Full Brightness
    The light stays on at a continuous 10% brightness throughout the night. When motion is detected, it brightens to 100% for approximately 30 seconds, then returns to 10% brightness.
Diagram showing three lighting modes: Mode 1 (100% brightness with motion), Mode 2 (30% brightness constant), Mode 3 (10% brightness constant, 100% with motion).

Image: Visual representation of the three operational modes, illustrating light behavior with and without motion detection.

Illustration of a person walking with a dog at night, and the solar light automatically illuminating upon detecting movement.

Image: The motion sensor in action, showing the light automatically activating when movement is detected.

5. Maintenance

To ensure the optimal performance and longevity of your solar lights, consider the following maintenance tips:

  • Clean the Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, snow, or debris. A clean panel ensures maximum sunlight absorption and charging efficiency.
  • Clear Obstructions: Ensure no trees, bushes, or other structures obstruct direct sunlight from reaching the solar panel, especially during peak daylight hours.
  • Inspect for Damage: Periodically check the light unit and wiring for any signs of damage or wear. If any damage is found, contact customer support.
  • Battery Care: The integrated lithium-ion battery is designed for long life. Avoid prolonged storage in a completely discharged state. If storing for an extended period, ensure the light is fully charged beforehand.

6. Troubleshooting

If you encounter issues with your daphino solar lights, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Light does not turn on at night.Insufficient solar charge.Ensure the solar panel is in direct sunlight for 6-8 hours daily. Clean the solar panel.
Light flickers or has low brightness.Partial charge or dirty solar panel.Allow for a full day's charge. Clean the solar panel.
Motion sensor not detecting movement.Sensor obstructed or incorrect mode.Ensure the sensor is clear of obstructions. Verify the light is in a motion-sensing mode (Mode 1, 2, or 3).
Light turns off too quickly.Battery low or sensor sensitivity.Ensure adequate charging. The light is designed to turn off after approximately 30 seconds without motion.

7. Specifications

FeatureSpecification
Branddaphino
ModelNon-Remote
Brightness2500 Lumens
Light ColorWhite (6500K)
Beam AngleUp to 355° (adjustable heads)
Motion Sensor RangeMax 40 ft
Water ResistanceIP65 Waterproof
Power SourceSolar Powered
Battery1 Lithium Ion battery (included)
MaterialAcrylonitrile Butadiene Styrene, Polycarbonate
Product Dimensions10.53"L x 4.74"W x 3.45"H
Item Weight2.03 pounds (per unit)
Installation TypeWall Mount
Diagram showing the dimensions of the solar light: 5.1 inches for the solar panel width, 3.2 inches for its depth, 10.25 inches for the overall light width, and 2.55 inches for the height of the side panels.

Image: Detailed dimensions of the solar light unit and its 2500 Lumen brightness rating.

8. Warranty and Support

Your daphino solar lights come with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.

For warranty claims, technical support, or any questions regarding your product, please contact daphino customer service through the retailer where the product was purchased. Please have your purchase receipt and product model information ready when contacting support.

© 2025 daphino. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.