Tangkula 72-inch Outdoor Bench Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, usage, and maintenance of your Tangkula 72-inch Outdoor Bench. Designed for outdoor environments, this extra-long patio bench features a durable HDPE seat and back, supported by a heavy-duty metal frame. It is built to accommodate up to four people with a weight capacity of 1100 lbs, making it suitable for gardens, porches, lawns, backyards, and parks.

2. Safety Information

Important Safety Precautions:

• Do not exceed the maximum weight capacity of 1100 lbs. Overloading the bench can lead to structural damage and personal injury.
• Ensure all components are securely fastened before use. Regularly check and tighten screws as needed.
• For outdoor use, place the bench on a stable, level surface to prevent tipping.
• Keep children and pets away from the assembly area during installation.
• Avoid standing on the bench. It is designed for seating only.

3. Package Contents

Please verify that all parts listed below are present before beginning assembly. If any parts are missing or damaged, contact Tangkula customer support.

• 1 x Tangkula 72-inch Outdoor Bench (Disassembled components: HDPE seat, HDPE backrest, metal frame legs, crossbars)
• 1 x Hardware Pack (Screws, washers, nuts, Allen wrench)
• 1 x Instruction Manual (This document)

Image: An exploded view showing all individual components of the Tangkula 72-inch Outdoor Bench, including the seat, backrest, metal frame pieces, and hardware.

4. Setup and Assembly

Assembly typically requires two adults. Please follow these steps carefully. Do not overtighten screws until all components are loosely fitted.

1. Step 1: Attach Legs to Seat Frame
   Position the HDPE seat upside down on a soft, clean surface. Attach the metal leg frames to the designated mounting points on the underside of the seat using the provided screws and washers. Secure loosely.
   

   Image: Close-up view of the bench's underside, illustrating how the metal leg frames connect to the HDPE seat with screws.

2. Step 2: Install Crossbars
   Connect the metal crossbars between the leg frames to enhance stability. Use the appropriate screws and tighten them partially.
   

   Image: Detail of the bench's metal frame, highlighting the reinforced crossbar connection points for added stability.
3. Step 3: Attach Backrest
   Align the HDPE backrest with the upright supports of the metal frame. Secure the backrest using the remaining screws and washers.
   

   Image: A view from the side of the bench, showing the backrest being attached to the metal frame supports.

4. Step 4: Final Tightening
   Once all components are in place, gradually tighten all screws with the provided Allen wrench until secure. Do not overtighten to avoid stripping threads.
5. Step 5: Inspect and Position
   Carefully turn the bench upright. Inspect all connections to ensure they are firm. Place the bench on a flat, stable surface in your desired outdoor location.
   

   Image: A front-angle view of two fully assembled Tangkula 72-inch Outdoor Benches, showcasing their design and brown finish.

5. Operating and Usage

The Tangkula 72-inch Outdoor Bench is designed for comfortable seating in various outdoor settings.

• Seating Capacity: This bench is designed to comfortably seat up to 4 adults.
• Weight Limit: Adhere strictly to the maximum weight capacity of 1100 lbs.
• Placement: Ideal for gardens, patios, porches, lawns, backyards, and parks. Ensure the bench is placed on a level and stable surface.
• Ergonomics: The bench features an ergonomic design with a cozy backrest for enhanced comfort during extended use.

Image: The Tangkula 72-inch Outdoor Bench placed in a lush garden, demonstrating its suitability for outdoor environments.

6. Maintenance

Proper care will extend the life and appearance of your outdoor bench.

• Cleaning: Wipe the bench with a dry cloth to remove dust and light debris. For more thorough cleaning, use a damp cloth with mild soap and water. Avoid harsh chemicals or abrasive cleaners.
• Weather Resistance: The HDPE material is anti-fading, waterproof, and sunproof. However, for prolonged durability, consider covering the bench during extreme weather conditions or prolonged periods of non-use.
• Inspection: Periodically check all screws and connections for tightness. Retighten if necessary to maintain structural integrity.

Image: A detailed view of the bench's HDPE material, showing its weatherproof properties with water droplets on the surface, indicating its anti-fading, waterproof, and sunproof characteristics.

7. Troubleshooting

If you encounter any issues with your Tangkula Outdoor Bench, refer to the following common solutions:

• Bench feels wobbly:
  • Ensure all screws are fully tightened.
  • Verify the bench is placed on a level surface. Adjust if necessary.
• Difficulty during assembly:
  • Review the assembly steps and diagrams carefully.
  • Ensure you are using the correct hardware for each step.
  • Do not fully tighten screws until all parts are loosely assembled.
• Scratches or minor damage:
  • For minor cosmetic issues, touch-up paint or appropriate repair kits may be used (not included).
  • Contact customer support for significant damage.

8. Specifications

Image: A graphic illustrating the key dimensions (length, width, height, seat depth, seat height) and the maximum load capacity (1100 lbs) of the Tangkula 72-inch Outdoor Bench.

9. Warranty and Support

For warranty information, replacement parts, or further assistance, please contact Tangkula customer support.

You can visit the official Tangkula store for more products and support information: Tangkula Store