Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric LED Dual Head Motion Sensor Security Outdoor Light. Please read these instructions thoroughly before installation and retain them for future reference. This fixture is designed to enhance security and illumination in outdoor spaces with its integrated motion and dusk-to-dawn sensors, and selectable color temperature feature.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. Do not install this fixture with wet hands or while standing on a wet or damp surface.
CAUTION: All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician. This fixture is intended for outdoor use only and is rated for wet locations.
- Ensure the mounting surface is structurally sound to support the fixture.
- Do not attempt to disassemble or modify the fixture. There are no user-serviceable parts inside.
- Keep flammable materials away from the light fixture.
- Wear safety glasses and gloves during installation.
Package Contents
Verify that all components are present before beginning installation.
- LED Dual Head Motion Sensor Security Outdoor Light
- Mounting Hardware (screws, wire nuts, gasket, mounting plate)
Installation
Follow these steps for proper installation of your security light.
- Turn Off Power: Before starting, ensure the power to the junction box is turned off at the circuit breaker or fuse box.
- Prepare Mounting Surface: Secure the mounting plate to the junction box using the provided screws. Ensure the plate is flush and stable.
- Wiring: Connect the fixture's wires to your household wiring. Connect the black wire from the fixture to the black (live) wire from the junction box, the white wire from the fixture to the white (neutral) wire from the junction box, and the green/ground wire from the fixture to the bare copper (ground) wire from the junction box. Secure connections with wire nuts.
- Mount Fixture: Attach the fixture body to the mounting plate, ensuring the gasket is properly seated to prevent water intrusion. Secure with the provided screws.
- Adjust Light Heads: Loosen the adjustment screws on the light heads to position them as desired for optimal coverage. Tighten screws once adjusted.
Operation
Your Feit Electric security light features multiple operational modes for enhanced functionality.
Dusk-to-Dawn Sensor
The integrated dusk-to-dawn sensor automatically turns the light on at sundown and off at sunrise, providing continuous illumination during nighttime hours without manual intervention. This feature is active by default.
Motion Sensor
The motion sensor detects movement within its coverage area, activating the light when motion is detected. The detection range is approximately 60 feet. The light will remain on for a set duration after motion ceases, then turn off automatically.
5CCT Color Selectable
Before or during installation, you can select your preferred color temperature using the CCT control switch located on the fixture. Choose from five options:
- 2700K: Soft White
- 3000K: Bright White
- 4000K: Cool White
- 5000K: Daylight
- 6500K: Daylight Deluxe
Maintenance
The Feit Electric LED Dual Head Motion Sensor Security Outdoor Light is designed for minimal maintenance.
- Cleaning: To clean the fixture, ensure power is off. Use a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- Bulb Replacement: This fixture features integrated LEDs, meaning there are no bulbs to replace. The LEDs are rated for a 50,000-hour lifetime.
- Weather Resistance: The rugged, weather-resistant housing (IP65 rated) is designed to withstand various outdoor conditions. Periodically check for any debris accumulation that might obstruct sensors or light output.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Dusk-to-dawn sensor detects too much ambient light. | Check circuit breaker/fuse. Ensure sensor is not obstructed and ambient light levels are low enough for activation. |
| Light stays on continuously. | Motion sensor is continuously detecting movement. Wiring issue. | Ensure no constant motion in the detection zone. Adjust sensor angle if necessary. Verify wiring connections are correct. |
| Motion sensor is not detecting movement. | Sensor obstructed or improperly aimed. Ambient temperature too high (reduces sensor sensitivity). | Clear obstructions and adjust sensor angle. Ensure sensor is not exposed to direct heat sources. |
| Light flickers. | Loose wiring connection. Voltage fluctuations. | Turn off power and check all wiring connections. Consult an electrician if voltage issues persist. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | S10.5DFL/5CCT/MM/BZ |
| Wattage | 48 Watts |
| Brightness | 5000 Lumens |
| Voltage | 120 Volts |
| Color Temperature (CCT) | 2700K, 3000K, 4000K, 5000K, 6500K Selectable |
| Lifetime | 50,000 Hours |
| Motion Sensor Coverage | Up to 60 feet |
| Dusk-to-Dawn Feature | Integrated |
| Indoor/Outdoor Use | Outdoor |
| Water Resistance Level | Water Resistant (IP65 Rated) |
| Dimensions (L x W x H) | 9.68" x 4.58" x 4.94" |
| Weight | 1.2 Pounds |
| Included Components | Mounting Hardware |
Warranty and Support
This Feit Electric product is backed by a 5-year manufacturer's warranty. For warranty claims or technical support, please contact Feit Electric customer service. Retain your proof of purchase for warranty validation.
For further assistance, visit the official Feit Electric website or contact their customer support line.
