P2P PGS II Pepper Gel Cartridge User Manual

1. Product Overview

The P2P PGS II Pepper Gel Cartridge is a vital refill component designed for use with the P2P PGS II Pepper Gel Launcher. This cartridge contains 11 grams of highly effective pepper gel, ensuring your personal protection system remains fully operational and ready for deployment.

Each 11g cartridge is engineered to provide up to 13 separate bursts when used with the compatible PGS II launcher, offering a maximum effective range of 15 feet. It is an essential accessory for maintaining the readiness of your P2P personal defense device.

Figure 1.1: P2P PGS II Pepper Gel Cartridge. This image shows the complete pepper gel cartridge with its protective cap.

Figure 1.2: The P2P PGS II Personal Guard System, which utilizes the pepper gel cartridge. This image highlights key features of the launcher, including UV marking dye, flashlight, ballistic jet gel, and active ingredient (OC).

2. Safety Information and First Aid

WARNING: IRRITATION AND TEMPORARY BLINDNESS. MISUSE OF THIS DEVICE FOR ANY PURPOSE OTHER THAN SELF DEFENSE IS A CRIME UNDER THE LAW. This cartridge is intended for use only with the P2P PGS II Pepper Gel Launcher (Part No. 2292317).

General Safety Precautions:

• Keep out of reach of children and unauthorized persons.
• Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Do not puncture, incinerate, or expose to temperatures above 120°F (49°C).
• Do not attempt to modify or disassemble the cartridge.
• Always refer to the P2P PGS II Pepper Gel Launcher's owner's operation manual for complete safety and usage instructions.
• If deployed for protection, escape to safety and call authorities for help immediately.

First Aid Measures:

• In case of skin contact: Remove contaminated clothing. Wash skin thoroughly with soap and cold water. Repeat if necessary. Do not rub, or use creams, salves, or oils, as these can trap the irritant.
• For eye contact: Remove contact lenses, if present and easy to do. Flush eyes immediately with copious amounts of cold water for at least 15 minutes or longer. Do not rub eyes. Seek prompt medical attention if irritation persists.
• If inhaled: Move to fresh air. If breathing difficulties occur, seek medical attention.
• If swallowed: Drink plenty of warm water. Do NOT induce vomiting. Get prompt medical attention.

3. Setup and Installation

This cartridge is designed for quick and easy replacement in your P2P PGS II Pepper Gel Launcher. Follow these steps to install a new cartridge:

1. Ensure the P2P PGS II Pepper Gel Launcher is in a safe, disarmed state according to its own manual.
2. Remove the overcap from the new pepper gel cartridge.
3. Carefully insert the cartridge into the open barrel of the gel pistol, ensuring the valve is pointing downwards.
4. Close the barrel of the launcher firmly until the cartridge is fully seated and secured.
5. Confirm the cartridge is properly installed before re-arming or handling the launcher.

Figure 3.1: The P2P PGS II Pepper Gel Cartridge positioned next to the compatible P2P PGS II Launcher, illustrating how the cartridge fits into the system.

Figure 3.2: The pepper gel cartridge with its protective cap removed, showing the nozzle ready for insertion into the launcher.

4. Operation

The P2P PGS II Pepper Gel Cartridge functions as the active payload for the P2P PGS II Pepper Gel Launcher. Once correctly installed, the cartridge is ready to dispense pepper gel when the launcher is operated.

• The cartridge provides approximately 13 bursts of pepper gel.
• The effective range of the pepper gel is up to 15 feet.
• For detailed instructions on how to operate the P2P PGS II Pepper Gel Launcher, including aiming, firing, and safety mechanisms, please refer to the dedicated owner's manual for the launcher device.

5. Maintenance and Storage

Proper maintenance and storage of your P2P PGS II Pepper Gel Cartridge ensure its longevity and readiness for use.

Storage:

• Store cartridges in their original packaging in a cool, dry place.
• Avoid direct sunlight, extreme heat, or freezing temperatures.
• Keep away from open flames, sparks, and other ignition sources.
• Ensure the protective cap is securely on the cartridge when not installed in the launcher.

Disposal:

Dispose of empty or expired cartridges according to local regulations for hazardous waste. Do not puncture or incinerate used cartridges.

6. Specifications

Figure 6.1: Dimensions of the P2P PGS II Pepper Gel Cartridge.

7. Warranty and Support

Warranty Information:

This P2P PGS II Pepper Gel Cartridge comes with a manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms, please refer to the documentation provided with your P2P PGS II Pepper Gel Launcher or contact the manufacturer directly.

Customer Support:

For any questions, technical assistance, or support related to the P2P PGS II Pepper Gel Cartridge or the P2P PGS II Pepper Gel Launcher, please contact Prepared 2 Protect customer service. Contact information can typically be found on the manufacturer's official website or in the packaging of your product.