1. Product Overview
The NALsa M500S is an advanced Android 13 car stereo system designed to upgrade the multimedia and navigation capabilities of your Nissan Qashqai J10. This unit features an 8-core processor, 4GB RAM, 64GB ROM, and a high-resolution 1280x720 IPS touchscreen. It integrates modern connectivity options such as Bluetooth 5.0, 5G WiFi, 4G LTE, and supports both wired and wireless Apple CarPlay and Android Auto.

Image 1.1: NALsa M500S Android 13 Car Stereo unit and included AHD 720P rearview camera.
2. Compatibility
This car stereo is specifically designed for Nissan Qashqai J10 models manufactured between 2006 and 2013. It is crucial to confirm your vehicle's compatibility before installation.
Important: If you are uncertain about compatibility, please provide a photograph of your vehicle's original center console to NALsa customer service for technical verification prior to purchase or installation.

Image 2.1: Comparison of a Nissan Qashqai J10 dashboard before and after installation of the NALsa M500S car stereo.
3. Package Contents
Upon unpacking, verify that all components are present:
- NALsa Android Host (main screen unit)
- Power Cable
- RCA Cable
- USB Cables (multiple)
- Microphone (MIC)
- GPS Antenna
- 4G Antenna (for M200S-800S models)
- AHD 720P Reversing Camera (complimentary)
- Additional cable adapters as required for your vehicle model

Image 3.1: Detailed view of the rear connections for the NALsa M500S unit, illustrating various ports for GPS, 5G WiFi, Radio, 4G Antenna, USB, and RCA outputs. This image also shows the included cables for different models.
4. Installation Guide
Installation of the NALsa M500S Android car stereo requires specialized skills and knowledge of automotive electronics. It is strongly recommended to seek professional assistance for installation.
4.1 Professional Installation Recommendation
To ensure correct functionality and avoid damage to your vehicle or the stereo unit, it is advised to have the system installed by a qualified professional at an authorized auto repair shop. NALsa customer service provides ongoing technical support for installation-related queries.
4.2 Wiring Connections
Refer to the wiring diagrams provided with your unit and consult the detailed connection points on the back of the device. Ensure all cables are securely connected to their respective ports (e.g., GPS antenna, radio antenna, USB, RCA outputs, power, and steering wheel control wires).
Note: The M500S model supports an external SIM card slot for 4G connectivity. Ensure the SIM card is inserted with the chip facing the system module and with a bevel outward.

Image 4.1: Visual guide for 4G SIM card insertion, steering wheel control wiring, GPS antenna connection, and 5GHz WiFi antenna placement.
5. Operating Instructions
5.1 Basic Functions
- Touchscreen Interface: The unit features a 9 or 10-inch 2.5D IPS high-resolution multi-touch screen. Navigate through menus and applications by tapping, swiping, and pinching.
- Audio Playback: The built-in DSP (Digital Signal Processor) allows for adjustment of surround sound, bass, and treble filtering. The amplifier IC (Toshiba 7851/7850/7838) ensures high-quality audio output.
5.2 Navigation
The NALsa M500S includes an integrated GPS module supporting GPS, BDS, and GLONASS satellite systems. It supports both online and offline navigation maps. Ensure the GPS antenna is properly installed for optimal signal reception.
5.3 Connectivity
- Bluetooth 5.0: Connect your smartphone for hands-free calling and audio streaming. Pair your device through the Bluetooth settings menu on the stereo.
- Wi-Fi: Connect to a Wi-Fi hotspot (e.g., from your smartphone) to access online features, download apps, and update maps. The unit supports 5G Wi-Fi (802.11 b/g/n).
- 4G LTE: Insert a SIM card into the designated slot to enable 4G LTE connectivity directly on the unit (M200S-800S models).
5.4 Apple CarPlay & Android Auto
The M500S model supports both wired and wireless Apple CarPlay and Android Auto. Connect your compatible smartphone via USB or wirelessly through Bluetooth and Wi-Fi to access phone features, navigation, and music directly on the stereo screen.
5.5 Steering Wheel Control (SWC)
The unit is compatible with your vehicle's existing steering wheel controls, allowing you to manage audio and calls without diverting attention from the road. If your vehicle lacks steering wheel buttons, compatible Bluetooth steering wheel buttons can be purchased separately.
5.6 Rear View Camera
The included AHD 720P reversing camera provides a clear view of the area behind your vehicle when reversing. The stereo automatically switches to the camera feed when the vehicle is put into reverse gear.
6. Specifications
| Feature | Specification (M500S) |
|---|---|
| Operating System | Android 13.0 API29 |
| Processor | 8-core |
| RAM | 4GB |
| ROM | 64GB |
| Screen Resolution | 1280*720 IPS |
| Bluetooth Version | 5.0 |
| Wi-Fi | 5G (802.11 b/g/n) |
| Network Support | 4G LTE (with SIM card) |
| CarPlay / Android Auto | Wired & Wireless |
| Amplifier IC | Toshiba 7851/7850/7838 |
| Receiver IC | 7708 |
| Special Features | Optical output, Coaxial output, Aluminum heat sink, Cooling fan |
| Voltage | 12 Volts |
| Item Weight | 5.5 pounds |

Image 6.1: Detailed parameter comparison table for NALsa car multimedia player models, including M500S specifications.
7. Maintenance
To ensure the longevity and optimal performance of your NALsa M500S car stereo, follow these maintenance guidelines:
- Screen Cleaning: Use a soft, lint-free cloth to gently wipe the touchscreen. Avoid abrasive cleaners or harsh chemicals that could damage the screen surface.
- Cooling System: The M500S includes an aluminum heat sink and a powerful cooling fan to manage internal temperatures. Ensure that the vents are not obstructed to allow for proper airflow.
- Software Updates: Periodically check for available software updates to ensure your system has the latest features and security enhancements.

Image 7.1: Visual explanation of the cooling fan's role in temperature regulation and the benefits of the IPS screen and DSP processor.
8. Troubleshooting
If you encounter issues with your NALsa M500S car stereo, consider the following common troubleshooting steps:
- No Power: Check all power connections and ensure the vehicle's ignition is on. Verify fuses if necessary.
- No Sound: Confirm speaker connections, volume levels, and audio source selection. Check if the mute function is active.
- GPS Signal Loss: Ensure the GPS antenna is securely connected and has a clear line of sight to the sky.
- Bluetooth Connection Issues: Ensure Bluetooth is enabled on both the stereo and your device. Try unpairing and re-pairing the devices.
- Touchscreen Unresponsive: Perform a soft reset of the unit (refer to the device's specific reset procedure if available).
For persistent issues or problems not covered here, please contact NALsa customer support for assistance.
9. Warranty and Support
NALsa provides professional pre-sales and post-sales technical support for your car stereo system. If you have any questions regarding compatibility, installation, operation, or troubleshooting, please do not hesitate to contact our customer service team.
You can reach NALsa technical support via chat or Amazon mail. When contacting support, please provide your product model (M500S), vehicle make and model (Nissan Qashqai J10), year of manufacture, and a detailed description of your inquiry or issue.



