onerbl AC/DC Adapter User Manual

1. Introduction

Thank you for choosing the onerbl AC/DC Adapter. This power supply is designed to provide reliable power to your compatible OttLite LED Standing Floor Lamp, enabling its operation or charging its internal battery. This adapter converts standard AC electrical power into the DC power required by your device. It has been tested to ensure compatibility and safe operation with the specified OttLite models.

2. Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Indoor Use Only: This adapter is designed for indoor use in dry locations. Do not expose it to rain, moisture, or extreme temperatures.
• Proper Voltage: Ensure the wall outlet voltage matches the input voltage range specified on the adapter label (100-240V AC).
• Avoid Overloading: Do not overload electrical outlets or extension cords.
• Cable Care: Do not place heavy objects on the power cord or allow it to be pinched or damaged. Inspect the cord regularly for any signs of damage.
• Disconnect Safely: Always grasp the plug, not the cord, when disconnecting the adapter from the wall outlet or your device.
• Ventilation: Ensure adequate ventilation around the adapter during use. Do not cover it with cloth or other materials.
• Protection Features: This adapter includes built-in Over Voltage Protection, Over Heat Protection, and Short Circuit Protection for enhanced safety.
• Children and Pets: Keep the adapter and its cord out of reach of children and pets.

3. Product Overview

3.1. Components

The onerbl AC/DC Adapter consists of two main parts: the adapter block with integrated wall prongs and the DC output cable with a connector plug.

Image: The onerbl AC/DC Adapter unit with its attached power cable.

3.2. Features

• High-quality replacement AC wall power charger adapter.
• Compatible with various OttLite LED Standing Floor Lamp models (CS6BG9-SHPR, CS6PN9-SHPR, CS6WH9-SHPR, CS6G5C-SHPR, CS6WGC-SHPR).
• Global AC input voltage compatibility (100-240V AC).
• Built-in Over Voltage Protection, Over Heat Protection, and Short Circuit Protection.
• Designed for reliable and safe power delivery.

3.3. Specifications

Image: Product label displaying input voltage (100-240V AC), frequency (50/60Hz), and safety warnings.

Image: Diagram illustrating the dimensions of the adapter block: approximately 3.1 inches in length, 2.1 inches in width, and 1.2 inches in depth.

The cable length is approximately 76 inches.

4. Setup

Follow these steps to set up your onerbl AC/DC Adapter:

1. Inspect: Before connecting, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
2. Connect to Device: Locate the power input port on your OttLite LED Standing Floor Lamp. Carefully insert the DC output plug of the onerbl adapter into this port. Ensure a snug and secure connection.
3. Connect to Power Outlet: Plug the adapter's AC prongs into a standard wall electrical outlet. Ensure the outlet is easily accessible and not obstructed.

Image: The onerbl AC/DC Adapter securely plugged into a wall power outlet.

Once connected, your OttLite LED Standing Floor Lamp should receive power and be ready for operation or charging, depending on its design.

5. Operating Instructions

The onerbl AC/DC Adapter operates automatically once connected to a power source and your compatible device. It provides continuous power to your OttLite LED Standing Floor Lamp. There are no user-adjustable settings on the adapter itself.

• Ensure both connections (to the lamp and to the wall outlet) are firm.
• The adapter will supply the necessary DC power to operate your lamp or charge its battery.
• Refer to your OttLite LED Standing Floor Lamp's user manual for specific operating instructions related to the lamp's functions (e.g., turning on/off, adjusting brightness).

6. Maintenance

The onerbl AC/DC Adapter requires minimal maintenance to ensure long-lasting performance.

• Cleaning: Disconnect the adapter from the power outlet and your device before cleaning. Use a soft, dry cloth to wipe the exterior of the adapter. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use for extended periods, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cable to prevent damage.
• Inspection: Periodically inspect the adapter and cable for any signs of wear, cuts, or damage. If damage is observed, discontinue use and replace the adapter.

7. Troubleshooting

If you encounter issues with your onerbl AC/DC Adapter, please refer to the following common troubleshooting steps:

If the problem persists after trying these steps, please contact customer support.

8. Warranty and Support

Specific warranty information for this onerbl AC/DC Adapter may vary depending on your purchase location and retailer. Please refer to your purchase documentation or contact the seller directly for details regarding warranty coverage and support.

For technical assistance or inquiries, please reach out to the customer support provided by your retailer or the manufacturer, Shenzhen Waweis Technology Co., Ltd.