Introduction
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your BlendJet 2 Portable Blender. Please read this manual thoroughly before first use and retain it for future reference.
Product Overview
The BlendJet 2 is a compact, portable, and USB-C rechargeable blender designed for creating smoothies, shakes, and other blended items on the go. It features patented TurboJet technology for efficient blending and a self-cleaning function for convenience.
Image: The BlendJet 2 Portable Blender in black, shown filled with strawberries, blueberries, and mango pieces, ready for blending.
Setup and First Use
- Charge the Blender: Before first use, fully charge your BlendJet 2 using the included USB-C cable. Connect it to any USB port. Charging takes approximately 1 hour for 15+ blends. The power button will display a solid blue light when fully charged. Do not charge the BlendJet when wet.
- Align the Jar: Ensure the arrows on the back of the jar and the base are closely aligned. The power button will flash white if misaligned.
- Initial Cleaning: Clean the blender by adding water and a drop of soap to the jar, then blend for a short cycle. Rinse thoroughly.
Image: A BlendJet 2 blender connected to a power adapter via a USB-C cable, indicating the charging process.
Operating Instructions
Blend Mode (Standard Blending)
- Prepare Ingredients: Add liquid first, then your solid ingredients. Leave a small amount of space at the top of the jar.
- Secure Lid: Tighten the lid securely.
- Start Blending: Press the power button once to start a 20-second blend cycle. Press it again to stop mid-cycle. Repeat as needed for thicker blends.
Image: Close-up views of the stainless steel blades and a blue BlendJet 2 demonstrating the "tornado effect" blending, highlighting the patented TurboJet Technology.
Pulse Mode (Food Processing)
- To enter Pulse Mode, double-press the power button.
- Blue lights will flash left to right 3 times, and the swirl light will remain illuminated while Pulse Mode is active.
- Press and hold the power button repeatedly to pulse. The blender will stop after 5 seconds of inactivity. This mode is suitable for dips and salsas.
Lock Mode (Travel Safety)
- To activate Lock Mode, hold down the power button while in Blend Mode. This prevents accidental activation during transport.
- To unlock, hold down the power button until the blue circle flashes 3 times.
Image: A teal BlendJet 2 with an arrow pointing to the power button, indicating "Lock Mode" to prevent accidental blending.
Maintenance and Cleaning
Self-Cleaning Function
- After use, add water and a drop of dish soap to the jar.
- Secure the lid and activate Blend Mode by pressing the power button once.
- Allow the blender to run for a short cycle, then rinse the jar thoroughly.
Image: A black BlendJet 2 showing measurement markings on the jar and a hand adding soap and water for the self-cleaning process.
General Care
- Do not immerse the base of the blender in water.
- Wipe the base with a damp cloth.
- Ensure the charging port is dry before connecting the USB-C cable.
Troubleshooting
| Indicator Light | Problem | Solution |
|---|---|---|
| Flashing Red | Jar is not aligned with the base. | Loosen the jar from the base and screw it back in until the arrows on the back of the jar and base are closely aligned. The power button will flash white instead of red. |
| Solid Red | Blades are blocked. | Turn the blender upside down and start blending. Then, turn it right-side up again so your ingredients hit the blades at full speed. |
| Circle is red & purple | Zero Charge | Charge the BlendJet. |
| Circle is half blue, half purple | 50% Charge | Charge the BlendJet for optimal performance. |
| Circle is solid blue | Full Charge | The device is fully charged and ready for use. |
| Circle turns purple (vs. blue) | Low Battery | Recharge the BlendJet. |
Image: A visual guide showing different indicator light colors (red, purple, blue) on the BlendJet 2 power button and their corresponding meanings for charging status and troubleshooting.
Specifications
- Brand: BlendJet
- Model: BlendJet 2 (BJ-2A-16oz-Black)
- Color: Black
- Special Features: Compact, Portable, Self Cleaning, USB Rechargeable
- Capacity: 16 Fluid Ounces
- Product Dimensions: 3"D x 3"W x 9.3"H
- Included Components: Juice Container, USB-C Charging Cable
- Power Source: Battery Powered
- Number of Speeds: 1
- Voltage: 7.4 Volts
- Blade Material: Stainless Steel
- Item Weight: 1 pound
Warranty and Support
The BlendJet 2 comes with a Limited Warranty. For detailed warranty information and customer support, please visit the official BlendJet website or contact their customer service department.
UPC: 810053643495
Official Product Videos
BlendJet 2 Overview
Video: An official BlendJet video providing a general overview of the BlendJet 2 portable blender, demonstrating its features and ease of use.
How to Use BlendJet 2
Video: This video demonstrates the step-by-step process of using the BlendJet 2, from adding ingredients to starting a blend cycle.
