Welcome to the BlendJet family!
We love blended beverages, and we worked very hard to create the perfect, powerful, and completely portable blender for you to enjoy down to the last sip!
Using your BlendJet One to make delicious beverages anywhere is fun and easy.
We created a Tutorials and Recipes section on our website, with videos, that will help you master your Blendjet: blendjet.com/tutorials.
If you have any questions or need anything at all, please contact us at support@blendjet.com. We usually reply within a few hours, but at most within 1 business day.
We love hearing from you!
Sincerely,
The BlendJet Team
P.S. If you like what we're doing, please tell your friends to visit us at BlendJet.com. We really appreciate your support, and thank you for being a part of the BlendJet community!
BlendJet One Tips
- NEVER put your hands inside your BlendJet or try to touch the blades.
- Before first use, add water and press the power button on your BlendJet to rinse it.
- Your BlendJet will take up to 3 hours to fully charge, but often charges much faster. It will arrive mostly charged, but for maximum power, charge it before your first use. The light turns red while charging and blue once fully charged.
- You can charge your BlendJet with any USB port, from your phone, to your computer, to the USB port in your car. The USB cord only fits in one way, so don't try to force it in the wrong way.
- Always start by adding a liquid, such as water, milk, or juice. This will make blending easy.
- We recommend cutting your fruit or other ingredients into small chunks.
- For maximum blending power, start your BlendJet upside down so that the blades reach their top RPM, then turn it rightside up so that your ingredients hit all 6 blades at full speed.
- You can blend ice. Make sure you blend with sufficient liquid inside first, and that your cubes aren't too large. If they get stuck, add liquid, shake your BlendJet a bit, or turn it upside down.
- We do not recommend hot liquids over 120°F / 49°C which may cause damage, including leaks, to the jar and base.
- To clean your BlendJet, simply put water with an optional drop of dish soap inside, and run it one or more times as needed. We don't recommend putting the jar or lid in the dishwasher. Never submerge the electronic base.
- Red and blue flashing lights mean your jar isn't aligned with your base. To fix this, simply screw your jar clockwise into the base. The arrow on the jar should line up with the light on the base. As a safety precaution there is a small magnet on the jar and base, which must be aligned, or else the blades won't spin.
- Red flashing lights mean your BlendJet needs to be recharged or that your blades are blocked. Recharge or shake your BlendJet, and/or turn it on upside down, then flip it back over while on.
