1. Introduction
Thank you for choosing the Gefolly SL-2800W Solar Street Light. This product is designed to provide efficient and reliable outdoor lighting using solar energy. Featuring a high-brightness output of 280000LM, a 6500K daylight white light, and an intelligent motion sensor, it is suitable for various outdoor applications such as parking lots, roads, gardens, and basketball courts. This manual provides essential information for the safe installation, operation, and maintenance of your solar street light.
Image: Two Gefolly SL-2800W solar street lights, showcasing their design and the included remote control.
2. Safety Information
- Read all instructions carefully before installation and use.
- Ensure the installation location is stable and can support the weight of the light fixture.
- Do not attempt to disassemble or modify the product. This may void the warranty and pose safety risks.
- Keep the solar panel clean to ensure optimal charging efficiency.
- Avoid looking directly into the LED light source when it is illuminated, as it can cause eye strain.
- Dispose of batteries and electronic components according to local regulations.
3. Package Contents
Verify that all components are present and undamaged upon opening the package:
- Gefolly SL-2800W Solar Street Light Unit (quantity as per purchase, e.g., 2 units for a 2-pack)
- Remote Control (requires 2 AAA batteries, not included)
- Wall and Pole Mounting Accessories Set (brackets, screws, bolts)
- Integrated Lithium Polymer Battery (included within the light unit)
Image: Detailed view of the package contents, including the solar light, mounting hardware, and remote control.
4. Product Features
- Zero Electricity Bill: Powered entirely by solar energy, the light automatically charges during the day and illuminates at dusk, providing continuous lighting for up to 36 hours when fully charged.
- Super Wide Angle Lighting: Designed with 220-degree wide-angle illumination, covering an area of up to 2000-2200 sq.ft, eliminating blind spots.
- Intelligent Control & Multiple Modes: Equipped with a remote control for convenient operation. Features Light Sensing Mode, Motion Sensing Mode, and adjustable brightness from 10% to 100%. Timing settings (3H/5H/8H) are also available.
- Durable and Weatherproof: Constructed with an aluminum alloy reflector and rated IP66 waterproof, ensuring reliable performance in various weather conditions, including low and high temperatures.
- High-Efficiency Components: Utilizes 256 super bright LED beads and a 3.2V-30000mAh Lithium Polymer battery for long-lasting performance (up to 50,000 hours LED life).
Image: Comparison of Gefolly's high-efficiency LED beads against standard ones, highlighting superior brightness and lifespan.
Image: Illustration of the large-capacity 30000mAh battery, emphasizing its long-lasting power.
5. Installation
5.1 Pre-Installation Checks and Tips
- Test Before Installation: Cover the solar panel to check if the light functions normally before proceeding with full installation.
- Initial Charge: Before first use, ensure the solar panel receives sufficient direct sunlight for 10-12 hours to fully charge the battery.
- Optimal Placement: Install the light in a location where the solar panel receives direct sunlight throughout the day, away from any shade.
- Avoid Interference: To ensure the light sensor accurately distinguishes between day and night, protect the solar panel from other artificial light sources, which can interfere with its normal operation.
Image: Important warm tips for proper installation and initial setup of the solar street light.
5.2 Mounting Methods
The Gefolly SL-2800W supports both wall and pole mounting. It is recommended to install the light at a height of 10ft to 26ft (3m to 8m).
Wall Mounting
Attach the mounting bracket to a sturdy wall using the provided screws and bolts. Ensure the light is securely fastened and angled to maximize solar exposure.
Image: Example of the solar street light installed via wall mounting.
Pole Mounting
Secure the mounting bracket to a pole with a diameter between 1.77in-3.54in (4.5cm-9cm) using the provided accessories. Adjust the light's angle for optimal coverage and solar charging.
Image: Example of the solar street light installed via pole mounting, with recommended height and pole diameter.
6. Operation
The Gefolly SL-2800W Solar Street Light is equipped with intelligent control features, primarily operated via the included remote control.
6.1 Remote Control Functions
The remote control allows you to manage various settings of your solar street light. Ensure 2 AAA batteries are installed in the remote control before use.
Image: Detailed diagram of the remote control buttons and their corresponding functions.
- ON/OFF: Turns the light on or off manually.
- Brightness Adjustment: Use the '+' and '-' buttons to adjust brightness from 10% to 100%. A '50%' button is also available for quick adjustment.
- Motion Sensing Mode (M button): The light will maintain a low brightness (e.g., 20-30%) and switch to 100% brightness when motion is detected within 20-26ft (6-8m). After motion ceases, it returns to low brightness.
- Always Bright Mode (AUTO button): The light will stay at a set brightness continuously from dusk until dawn or until the battery depletes.
- Timing Settings (3H/5H/8H buttons): Activates 'Always Bright Mode' for the selected duration (3, 5, or 8 hours) after dusk, then automatically switches to 'Motion Sensing Mode' for the remainder of the night.
- Restart: Resets the light to its default settings.
6.2 Automatic Operation
The light features a built-in light sensor that automatically turns the light on at dusk and off at dawn, provided it is in an automatic mode (Motion Sensing or Always Bright with timing).
Image: Visual representation of the motion sensing and intelligent energy-saving feature.
Image: Depiction of the light operating in Motion Sensing Mode, adjusting brightness based on detected movement.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your Gefolly SL-2800W Solar Street Light.
- Clean Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and charging efficiency.
- Inspect Fixture: Occasionally check the light fixture and mounting hardware for any signs of wear, damage, or loose connections. Tighten any loose bolts or screws as needed.
- Clear Obstructions: Ensure no new obstructions (e.g., growing tree branches) are shading the solar panel, which could reduce charging effectiveness.
- Remote Control Batteries: Replace AAA batteries in the remote control as needed to maintain functionality.
8. Troubleshooting
If you encounter issues with your solar street light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | Insufficient solar charge; Solar panel covered; Light sensor interference; Remote control battery dead. | Ensure solar panel receives 6-8 hours of direct sunlight daily. Clean solar panel. Relocate light away from other artificial light sources. Replace remote control batteries. |
| Light stays dim or turns off quickly. | Insufficient charge due to cloudy weather or shade; Battery degradation over time. | Allow several sunny days for full recharge. Ensure optimal solar panel exposure. If problem persists after extended use, contact customer service. |
| Motion sensor not working. | Sensor obstructed; Incorrect mode selected; Sensing distance too far. | Clear any obstructions from the sensor. Ensure 'Motion Sensing Mode' is activated via remote. Verify placement within 20-26ft sensing range. |
| Remote control not responding. | Dead batteries; Out of range; Signal obstruction. | Replace AAA batteries in the remote. Ensure you are within effective range of the light. Remove any large obstructions between the remote and the light. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Gefolly |
| Model | SL-2800W |
| Power Source | Solar Powered |
| Light Color | 6500K Daylight White |
| Brightness | 280000LM (Lumen rating from title, specification lists 80000.00) |
| LED Beads | 256 pcs |
| Battery | 3.2V-30000mAh Lithium Polymer (integrated) |
| Waterproof Rating | IP66 |
| Product Dimensions | 23"L x 13.5"W x 2.76"H (58.4cm L x 34.3cm W x 7cm H) |
| Item Weight | 20.8 pounds (9.44 kg) |
| Material | Aluminum (fixture), Plastic (shade) |
| Control Method | Remote Control |
| Installation Type | Wall or Pole Mounted |
| Lighting Angle | 220 degrees |
10. Warranty and Support
Gefolly stands behind the quality of its products. The SL-2800W Solar Street Light comes with the following policy:
- 120-Day Money-Back Guarantee: If you are not satisfied with your purchase, you may be eligible for a refund within 120 days.
- 3-Year Product Maintenance: The product is covered by a 3-year maintenance policy from the date of purchase.
For any questions, concerns, or support needs regarding your Gefolly solar security flood lights, please contact our customer service team. Refer to your purchase documentation for specific contact details.
