Flashfish P60 Portable Power Station & TSP100 Solar Panel User Manual

Product Overview

The Flashfish P60 Portable Power Station and TSP100 Solar Panel combination provides a reliable and versatile power solution for various applications, including camping, RV travel, and off-grid scenarios. The P60 power station features a 520Wh lithium-ion battery with multiple output ports, while the TSP100 solar panel offers efficient solar charging capabilities.

Image: The Flashfish P60 Portable Power Station connected to the TSP100 Solar Panel, ready for use.

Safety Information

• Do not expose the power station or solar panel to extreme temperatures or direct sunlight for prolonged periods.
• Ensure proper ventilation during operation to prevent overheating.
• Keep away from water and moisture. The solar panel is not waterproof.
• Do not disassemble or attempt to repair the unit. Contact qualified service personnel for assistance.
• Keep out of reach of children.
• Use only the provided or recommended charging accessories.

Setup

P60 Portable Power Station Initial Setup:

1. Unpack the P60 Portable Power Station and all included accessories.
2. Before first use, fully charge the power station using the provided AC adapter until the display indicates 100%. This typically takes approximately 7 hours.
3. Familiarize yourself with the various input and output ports on the unit.

TSP100 Solar Panel Setup:

1. Unfold the TSP100 Solar Panel.
2. Locate the integrated kickstands on the back of the solar panel. Extend them to prop up the panel.
3. Angle the solar panel directly towards the sun for optimal charging efficiency.
4. Ensure the surface of the solar panel is clean and free from dirt or obstructions to maximize power generation.

Image: The Flashfish P60 Power Station and TSP100 Solar Panel deployed in an outdoor setting, ready for solar charging.

Operating Instructions

Charging the P60 Power Station:

• AC Adapter Charging: Connect the provided AC adapter to the input port of the P60 and plug it into a standard wall outlet. Full charge takes approximately 7 hours.
• Car Charging: Use the included car charger to charge the power station from your vehicle's 12V cigarette lighter port. This method takes approximately 10-12 hours for a full charge.
• Solar Charging (with TSP100 Solar Panel):
  1. Remove the DC5521 cable from the TSP100 solar panel's storage pocket.
  2. Connect the DC5521 cable from the solar panel to the DC5521 charging input port on the P60 power station.
  3. Position the solar panel to receive maximum direct sunlight. Recharging time varies based on location, temperature, and weather conditions.

Image: Visual representation of the three primary charging methods: solar panels, AC adapter, and car charging.

Using the P60 Power Station Outputs:

The P60 Power Station is equipped with 11 versatile output options to power a wide range of devices:

• AC Outlets (2x): 110V, 560W Rated, 1100W Peak. Ideal for small appliances like electric grills, coffee makers, and laptops.
• USB-A Ports (3x): For charging smartphones, tablets, and other USB-powered devices.
• USB-C Port (1x): Quick charge capable, suitable for modern devices requiring faster charging.
• DC Outputs (4x): 12V/10A.
• Car Port (1x): 12V/10A Max.

To activate an output group (AC or DC/USB), press the corresponding button on the control panel. The display will show the current battery level and power output in watts.

Image: An infographic detailing the 11 different port options available on the P60 Power Station, including AC, USB, DC, and car ports.

Image: A chart illustrating the 520Wh capacity and estimated number of charges or hours of use for various devices like drones, phones, tablets, and mini-fridges.

Image: A graph demonstrating the pure sine wave AC output of the Flashfish P60, which provides stable power suitable for sensitive electronics, compared to modified sine wave outputs.

Image: The Flashfish P60 Power Station being utilized indoors to power a laptop, highlighting its versatility as a home backup or everyday power source.

Maintenance

• Store the power station and solar panel in a cool, dry place away from direct sunlight when not in use.
• Recharge the power station every 3-6 months, even if not used, to maintain battery health.
• Clean the exterior of the power station and the surface of the solar panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Regularly check all cables and connections for any signs of wear or damage.

Troubleshooting

Specifications

P60 Portable Power Station:

• Model: P60
• Battery Type: Lithium-ion Battery
• Capacity: 520Wh / 140400mAh
• AC Output: 560W Rated, 1100W Peak Power (110V)
• DC Outputs: 4 x 12V/10A
• Car Port: 12V/10A Max
• USB Outputs: 3 x USB-A, 1 x USB-C Quick Charge
• Solar Charging Input: 18-24V
• Weight: 7.7 KG (approx. 17 lbs)
• Dimensions: 306 x 200 x 176 mm (approx. 12"L x 7.9"W x 6.9"H)
• Safety Features: Premium BMS technology, Overcharge, Over-discharge, Over Current, Over Voltage, Overload, Short Circuit, Overheat protection.

TSP100 Solar Panel:

• Type: High-efficiency Monocrystalline Silicon
• Solar Conversion Rate: 21.5% - 23.5%
• Rated Output: 100W
• DC Output Voltage: 18V / 5.56A Max
• USB A Output (QC3.0): 18W Max
• USB C Output: 65W Max
• Folded Size: 16.34 x 15.83 inches
• Unfolded Size: 61.50 x 15.83 inches
• Weight: 6.17 lbs
• Certifications: FCC, RoHS, CE, TUV, ICE

Warranty and Support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official FF FLASHFISH website. You can also contact customer service through the vendor information provided at the point of purchase.

Manufacturer: FF FLASHFISH

Model Name: P60+TSP100

UPC: 717225691127

For additional assistance, please visit the FF FLASHFISH Store on Amazon.