Introduction
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your Baseus AP02 Hand Held Vacuum Cleaner. Please read this manual thoroughly before first use and retain it for future reference.
The Baseus AP02 Hand Held Vacuum Cleaner, shown here with its various attachments and filter.
What's in the Box
Verify that all components are present upon unboxing:
- Main Body of the Vacuum Cleaner
- Electric Silicone Roller Brush (for pet hair and carpets)
- Brush Head (for dusting)
- Crevice Tool (for tight spaces)
- USB-C Charging Cable
- HEPA Filter Cleaning Brush
- User Manual (this document)
All components included in the Baseus AP02 package.
Setup
Initial Charging
Before first use, fully charge the vacuum cleaner. Connect the USB-C charging cable to the charging port on the vacuum and plug the other end into a compatible USB power adapter (not included). The indicator lights will flash during charging and remain solid when fully charged.
- Charging Time: Approximately 3.5 hours for a full charge.
- Battery Life: Up to 25 minutes of continuous use on a full charge.
Video demonstrating the charging process and indicator lights of the Baseus AP02 vacuum cleaner.
Attaching Nozzles
Select the appropriate nozzle for your cleaning task and firmly attach it to the vacuum's suction port. The electric roller brush, brush head, and crevice tool are interchangeable.
Operating Instructions
Power On/Off and LED Light
To power on the vacuum, press and hold the power button for 3 seconds. The LED light will illuminate automatically, assisting in cleaning dark areas. Press the power button again briefly to turn off the LED light. To power off the vacuum, press and hold the power button for 3 seconds.
The built-in LED light helps illuminate debris in dark or hard-to-reach areas.
Using the Electric Silicone Roller Brush
This attachment is ideal for picking up pet hair and debris from carpets, upholstery, and car interiors. Its unique design prevents hair entanglement, ensuring efficient cleaning.
The electric silicone roller brush effectively removes hair without entanglement.
Demonstration of the electric silicone roller brush picking up pet hair from various surfaces.
Using the Brush Head
The brush head is suitable for dusting delicate surfaces, keyboards, hard floors, and other areas where a gentle touch is required.
The brush head is effective for dusting fine particles from various surfaces.
Using the Crevice Tool
For hard-to-reach spots, narrow gaps, and corners, attach the crevice tool. This allows for precise cleaning in tight areas like car seats, sofa crevices, and cabinet edges.
The crevice tool is perfect for cleaning tight spaces in car interiors.
The crevice tool reaches deep into gaps and corners for thorough cleaning.
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.
Emptying the Dustbin and Cleaning the HEPA Filter
- Press the dustbin release button to detach the dustbin from the main body.
- Empty the collected debris into a trash can.
- Remove the HEPA filter from the dustbin. Use the provided cleaning brush to remove dust and debris from the filter.
- For thorough cleaning, the HEPA filter can be rinsed under running water. Ensure it is completely dry before reinserting it into the dustbin.
- Reattach the dustbin to the main body until it clicks into place.
Steps for hassle-free dustbin emptying and filter cleaning.
Video demonstrating the process of emptying the dustbin and cleaning the filter.
Cleaning the Electric Roller Brush
To maintain optimal performance, regularly clean the electric silicone roller brush, especially if used for pet hair.
- Locate the roller brush lock button on the bottom of the vacuum head and press it to release the roller brush.
- Remove any tangled hair or debris from the roller brush. You may use scissors to carefully cut through stubborn tangles.
- The silicone roller brush can be rinsed under water for a more thorough clean. Ensure it is completely dry before reinserting.
- Reinstall the roller brush by aligning it correctly and pushing it until it clicks into place.
Instructions for detaching, snipping tangled hair, and rinsing the detachable roller.
Troubleshooting
If you encounter issues with your Baseus AP02 vacuum cleaner, refer to the common problems and solutions below:
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not turn on. | Low battery; Power button not held long enough. | Charge the vacuum fully. Press and hold the power button for 3 seconds. |
| Weak suction power. | Full dustbin; Clogged filter; Blocked nozzle/hose. | Empty the dustbin. Clean or replace the HEPA filter. Check and clear any blockages in the nozzles or main suction path. |
| Roller brush stops spinning. | Hair/debris tangled in brush; Protection mechanism activated (due to excessive pressure). | Remove and clean the roller brush. If the protection mechanism is activated, release pressure and restart the vacuum. |
| Short battery runtime. | Battery not fully charged; Battery degradation over time. | Ensure the vacuum is fully charged before use. If battery life significantly decreases, contact customer support. |
Specifications
| Brand: | Baseus |
| Model Name: | AP02 |
| Wattage: | 160 watts |
| Capacity: | 1 Liters (Dust Bin) |
| Battery: | 10,000mAh Lithium-Ion (included) |
| Runtime: | Up to 25 minutes |
| Charging Time: | 3.5 Hours |
| Filter Type: | HEPA Filter |
| Form Factor: | Handheld, Cordless |
| Product Dimensions: | 4.33"L x 5.7"W x 17.7"H |
| Item Weight: | 3.9 pounds |
Warranty and Support
Baseus offers 18 months after-sales support for the AP02 Hand Held Vacuum Cleaner. For any product-related issues, technical assistance, or warranty claims, please contact Baseus customer support through the retailer's platform or the official Baseus website.
Please retain your proof of purchase for warranty validation.
