JOYLIT 30MM Wide COB LED Strip Lights

Introduction

The JOYLIT 30MM Wide COB LED Strip Light is an advanced lighting solution designed for various indoor applications. Featuring COB (Chip-on-Board) technology, this strip light provides superior brightness and uniform light distribution without visible individual LED dots. Its 30mm wide, 5-row design ensures broad illumination, making it suitable for commercial, home, and industrial environments.

Image: The JOYLIT 30MM Wide COB LED Strip Light, showing its flexible design and adhesive backing.

Safety Information

Important Safety Precautions:

• FORBIDDEN TO LIGHT UP WHEN IN THE REEL: Never operate the LED strip while it is still coiled in the reel, even for short periods. This can cause excessive heat buildup and damage.
• Voltage Requirement: Use only with a low-voltage 24V DC power supply. Connecting directly to AC power will damage the strip.
• Handling: LED strip lights must be handled with care. Applying excessive pressure or bending sharply may damage the internal components.
• Indoor Use Only: This product has an IP20 rating and is designed for indoor use only. Do not install in wet or damp locations.
• Maximum Run Length: Each maximum run length requires a separate power supply. Do not extend beyond the recommended length without proper power distribution to avoid voltage drop and overheating.
• Eye Safety: Do not stare directly into the light source when it is illuminated.
• Professional Installation: This product is intended to be installed and serviced by qualified personnel only.

Package Contents:

• LED Strip Only

Image: Product packaging displaying safety warnings and manufacturer contact information.

Product Features

• Advanced COB Technology: Features 5 rows of COB LED chips across a 30mm wide strip, providing bright, uniform, and dotless linear lighting.

  Image: Illustration of the COB LED strip's uniform surface lighting, highlighting 24V DC, 40W/meter, 4400LM/meter, and CRI 90+.
• Ultra Bright Illumination: Contains 8000 LED chips (1600 LEDs/meter) with a total wattage of approximately 160W (40W/meter) and an impressive 22000 lumens (4400LM/meter), ideal for large spaces requiring high brightness.
• Enhanced Durability and Lifespan: Constructed with a double-layer thicker PCB board for superior electronic conductivity and heat dissipation. Features strictly selected LED lamp beads for consistent color temperature and lighting saturation. Utilizes UL-approved 18AWG silicone wire, resistant to 200°C high temperatures, ensuring safety and a lifespan exceeding 65,000 hours.

  Image: Detailed view of the LED strip highlighting the dual-layer copper PCB, 5 rows of premium chips for color consistency, and 18AWG UL-listed silicone cable for high temperature resistance.

• 24V Low Voltage Input: The 24V input voltage minimizes voltage drop, ensuring consistent brightness across the entire strip, unlike 12V strips which may show significant light fade, especially for high-brightness models. 24V is also a human safety voltage.
• High Color Rendering Index (CRI > 90): A high CRI ensures strong color reproduction, making illuminated objects appear vibrant, attractive, and fully saturated. This is perfect for retail displays, malls, display cabinets, and high-end clubs.

  Image: Visual comparison demonstrating the superior color rendering (RA > 90) of JOYLIT LED strips compared to standard RA 80 lighting.

• Fully Dimmable: When paired with a compatible LED dimmer (sold separately), the brightness can be smoothly adjusted from 0-100%. It is compatible with most dimmer types, including ELV, TRIAC, DMX, 0-10V, RF, and IR.

  Image: The LED strip demonstrating dimmable functionality, showing light output at 10% and 100% brightness.
• Easy Installation: Features original brand adhesive backing for secure mounting on any dry, clean, and smooth surface. The strip can be cut every 1 inch (2.5CM) for DIY customization.

  Image: Collage illustrating the LED strip's flexibility, 3M adhesive tape, cuttable segments, and 24V low voltage safety.

Setup and Installation

Follow these steps for proper setup and installation of your JOYLIT LED Strip Light. Ensure all safety precautions are observed before beginning.

Required Components (Not Included):

• 24V DC Power Supply (minimum 200W for this 5M strip)
• Power Cords (for connecting power supply to mains)
• Flathead Screwdriver (for terminal connections)
• Compatible LED Dimmer (optional, for dimmable functionality)

Image: An example of a compatible 24V power supply unit (sold separately).

Image: An example of a remote control and LED dimmer unit (sold separately).

Connection Steps:

1. Step 1: Preparation

   Gather all necessary components: the 24V LED strip, a 24V power supply, power cords, and a flathead screwdriver. Ensure the power supply is rated for at least 200W for the 5-meter strip.

   Video: This video demonstrates the connection process for the JOYLIT LED strip, including preparation, power input, and power output connections. (Relevant segment: 0:05 - 0:10)

2. Step 2: Connecting the Power Input

   Connect the power cords to the input terminals of the 24V power supply. Carefully identify and connect the positive and negative terminals correctly to avoid damage.

   Video: This video demonstrates the connection process for the JOYLIT LED strip, including preparation, power input, and power output connections. (Relevant segment: 0:11 - 0:20)

3. Step 3: Light Strip Connection Power Output

   Connect the wires from the LED strip to the output terminals of the power supply. Again, ensure the positive (red wire) and negative (black wire) terminals are connected accurately.

   Video: This video demonstrates the connection process for the JOYLIT LED strip, including preparation, power input, and power output connections. (Relevant segment: 0:21 - 0:33)
4. Step 4: Turn on the Power and Light up the Strip

   Once all connections are secure, plug the power supply into a suitable power outlet. The LED strip should illuminate. Remember, the power supply is for indoor use only and is not waterproof.

   Video: This video demonstrates the connection process for the JOYLIT LED strip, including preparation, power input, and power output connections. (Relevant segment: 0:39 - 0:43)

Mounting and Customization:

• Surface Preparation: Ensure the mounting surface is dry, clean, and smooth for optimal adhesion.
• Adhesive Backing: Peel off the protective film from the 3M adhesive backing on the strip and firmly press the strip onto the desired surface.
• Cutting: The LED strip can be cut at designated marks, approximately every 1 inch (2.5 CM), to fit specific lengths. Use sharp scissors to ensure a clean cut.

  Image: A pair of scissors poised to cut the LED strip at a designated cutting mark.

• Heat Dissipation: For prolonged use, especially in high-brightness applications or enclosed spaces, it is highly recommended to install the LED strip in an aluminum channel. This helps dissipate heat and prolong the lifespan of the strip.

Operating Instructions

Once installed and powered, the JOYLIT LED Strip Light operates directly. For dimming functionality, a compatible dimmer is required.

• Basic Operation: The strip will illuminate once connected to a suitable 24V DC power supply and the power supply is turned on.
• Dimming: If a compatible LED dimmer is installed between the power supply and the LED strip, use the dimmer's controls (e.g., remote control, rotary knob) to adjust the brightness from 0% to 100%.

Maintenance

To ensure the longevity and optimal performance of your JOYLIT LED Strip Light, follow these simple maintenance guidelines:

• Cleaning: Gently wipe the surface of the LED strip with a soft, dry cloth to remove dust or debris. Do not use abrasive cleaners or excessive moisture.
• Physical Inspection: Periodically inspect the strip for any signs of damage, such as cuts, kinks, or loose connections. Address any issues promptly.
• Heat Management: If an aluminum channel is used, ensure it remains free of dust and obstructions to allow for proper heat dissipation.
• Environmental Conditions: Ensure the strip remains in a dry, indoor environment, as it is not water-resistant.

Troubleshooting

If you encounter issues with your JOYLIT LED Strip Light, refer to the following common problems and solutions:

Specifications

For detailed product data, refer to the official product information sheet. An example of a product data sheet can be found here: EPREL Product Information

Warranty and Support

For specific warranty details and support inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer/Seller Contact Information:

• Company: Joyland Electronics.,Ltd
• EC Representative Address: 2 Rue Cyprien Bureau 3, 92400 Courbevoie, France
• Telephone: 0033606798969
• Email: sdh.tech@outlook.com