1. Introduction
This manual provides essential information for the safe and efficient use of your Onerbl 12V AC-DC Adapter. This power supply is designed to convert AC power from electrical outlets into the DC power required by compatible devices, specifically Arcade1Up gaming cabinets.
Please read this manual thoroughly before using the adapter and retain it for future reference.
Image 1.1: Front view of the Onerbl 12V AC-DC Adapter.
2. Safety Information
To ensure safe operation and prevent damage, observe the following precautions:
- Use the adapter only with devices that require 12V DC input and have a compatible connector.
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the adapter to strong impacts.
- Do not attempt to open or modify the adapter. There are no user-serviceable parts inside.
- Ensure the power outlet is easily accessible and unplug the adapter during electrical storms or when unused for extended periods.
- Keep out of reach of children.
3. Setup
Follow these steps to connect your Onerbl AC-DC Adapter:
- Verify Compatibility: Ensure your device requires a 12V DC power input and has a compatible 2-pin power connector. This adapter is compatible with Arcade1Up models 8280 and XMN-A-01253, including Marvel Vs. Capcom 2 and X-Men ‘97 Edition Deluxe Video Game Cabinets.
- Connect to Device: Plug the DC output connector of the adapter into the power input port of your Arcade1Up gaming cabinet.
- Connect to Power Outlet: Insert the AC input plug of the adapter into a standard electrical wall outlet (100-240V AC, 50/60Hz).
- Power On: Once connected, your device should receive power.
Image 3.1: The 2-pin power cord for connecting to the wall outlet.
4. Operating
The Onerbl 12V AC-DC Adapter operates automatically once connected to a power source and a compatible device. It provides a stable 12V DC output to power your Arcade1Up cabinet.
- Ensure all connections are secure before powering on your device.
- A small indicator light on the adapter may illuminate when power is supplied.
- To disconnect power, always unplug the adapter from the wall outlet first, then from the device.
Image 4.1: The Onerbl AC-DC Adapter in use, connected to a device and a wall outlet.
5. Maintenance
The Onerbl AC-DC Adapter requires minimal maintenance:
- Keep the adapter clean by wiping it with a dry, soft cloth. Do not use liquid cleaners.
- Store the adapter in a cool, dry place when not in use.
- Regularly inspect the power cord and adapter housing for any signs of damage, such as cuts, fraying, or cracks. If damage is found, discontinue use immediately.
6. Troubleshooting
If you encounter issues with your adapter, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on. | Adapter not properly connected; power outlet issue; incompatible device. | Ensure all cables are securely plugged in. Test the power outlet with another device. Verify your device requires 12V DC. |
| Adapter feels hot. | Normal operation; excessive load; poor ventilation. | A slight warmth is normal. Ensure the adapter is not covered and has adequate ventilation. If it's excessively hot, disconnect immediately and contact support. |
| Flickering power to device. | Loose connection; faulty adapter or device. | Check all connections. Try a different power outlet. If the issue persists, the adapter or device may be faulty. |
7. Specifications
Technical details for the Onerbl 12V AC-DC Adapter:
- Input: 100-240V AC, 50/60Hz
- Output: 12V DC, 1A
- Connector Type: 2-pin (specific to compatible Arcade1Up models)
- Compatible Devices: Arcade1Up 8280, XMN-A-01253 (Marvel Vs. Capcom 2, X-Men ‘97 Edition Deluxe Video Game Cabinet Machine Lit Marquee & Riser Arcade 1up)
- Manufacturer: Shenzhen Waweis Technology Co., Ltd
Image 7.1: Dimensions and cable length of the Onerbl AC-DC Adapter. Total cable length approximately 127.8 inches.
8. Warranty
This Onerbl product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the product packaging or contact the retailer for specific warranty terms and duration. The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
9. Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or the manufacturer. Please have your product model number (8280, XMN-A-01253) and purchase information ready when contacting support.
Manufacturer: Shenzhen Waweis Technology Co., Ltd