GoodCook Everyday Digital Scale (Model 10901) Instruction Manual

1. Product Overview

The GoodCook Everyday Digital Scale is designed for accurate weighing and measuring of food and other objects up to 11 pounds (5 kg). Its illuminated digital display provides clear readings in multiple units, making it an essential tool for precise cooking and baking.

• Accurately weighs food and objects up to 11 pounds (5 kg).
• Illuminated digital display shows weights in grams, kilograms, pounds, ounces, milliliters, and milk milliliters.
• Digital LCD sensor system measures in 0.1-ounce and 1-gram increments.
• Tare function allows you to measure ingredient weights without including the container's weight.
• Slim and lightweight design for easy storage.
• Features auto shut-off after 1 minute of inactivity to conserve battery life.
• Equipped with non-slip feet for stability during use.

2. Setup

2.1 Battery Installation

Your GoodCook Everyday Digital Scale requires two (2) AAA batteries, which are included. To install or replace batteries:

1. Turn the scale upside down.
2. Locate the battery compartment cover on the bottom of the scale.
3. Slide the cover open.
4. Insert the two AAA batteries, ensuring correct polarity (+/-).
5. Close the battery compartment cover securely.

2.2 Initial Power On

After installing the batteries, place the scale on a flat, hard surface. Press the 'Z/T ON/OFF' button to turn on the scale. The display will illuminate and show '0' when ready for use.

3. Operating Instructions

3.1 Power On/Off

• To Turn On: Press the 'Z/T ON/OFF' button. The display will show '0'.
• To Turn Off: Press and hold the 'Z/T ON/OFF' button for approximately 3 seconds until the display turns off. The scale also features an automatic shut-off after 1 minute of inactivity.

3.2 Changing Measurement Units

The scale can display measurements in grams (g), kilograms (kg), pounds (lb), ounces (oz), milliliters (ml), and milk milliliters (milk ml).

1. With the scale powered on and showing '0', press the 'UNIT' button.
2. Each press of the 'UNIT' button will cycle through the available measurement units. Select your desired unit before weighing.

3.3 Tare Function

The Tare function allows you to subtract the weight of a container or previous ingredients, so you can measure subsequent ingredients accurately.

1. Place an empty container on the scale. The display will show its weight.
2. Press the 'Z/T ON/OFF' button (also functions as Tare). The display will reset to '0'.
3. Add your ingredients to the container. The display will show only the weight of the added ingredients.
4. Repeat the Tare process to add multiple ingredients to the same container.

4. Maintenance

4.1 Cleaning

To ensure the longevity and accuracy of your scale, keep it clean and dry. Wipe the surface with a damp cloth and mild detergent if necessary. Do not immerse the scale in water or use abrasive cleaners.

4.2 Storage

Store the scale in a cool, dry place. Its slim design allows for easy storage in cabinets or drawers.

5. Troubleshooting

• Display shows 'Lo': Batteries are low and need to be replaced.
• Display shows 'Err': The scale is overloaded. Remove items immediately to prevent damage.
• Inaccurate readings: Ensure the scale is on a flat, stable surface. Avoid placing it near strong electromagnetic fields.
• Scale does not turn on: Check if batteries are installed correctly and have sufficient charge.

6. Specifications

7. Official Product Video

8. Warranty and Support

For warranty information or product support, please refer to the packaging or contact GoodCook customer service. Keep your purchase receipt for any warranty claims.