Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your OKD Luxury 70" Fluted Fireplace TV Stand. Please read all instructions carefully before beginning assembly or operation to ensure safe and proper use of the product. Keep this manual for future reference.
Important Safety Information
WARNING: Do Not Exceed The Maximum Load Limit.
Always ensure the TV stand is placed on a stable, level surface. Do not allow children to climb on the unit. Keep all electrical components, especially the fireplace, away from water and moisture. Ensure proper ventilation around the fireplace unit during operation.
Setup and Assembly
The OKD Luxury 70" Fluted Fireplace TV Stand requires assembly. It is recommended that two people assist with the assembly process for smoother and safer installation. The TV stand and the electric fireplace unit will be shipped in two separate packages, which may arrive on different days.
Before starting, lay out all parts and hardware and compare them with the provided assembly instructions. All parts are labeled for easy identification. Follow the illustrated instructions step-by-step. Exercise caution when handling smaller components, such as plastic K pieces, as excessive force can cause damage.
The OKD Luxury 70-inch Fluted Fireplace TV Stand with its cabinet doors open, revealing the interior storage compartments and the central fireplace insert.
An overhead view of the OKD Luxury 70-inch Fluted Fireplace TV Stand, highlighting the faux marble top and the overall curved design.
The unit features three pre-punched holes on the back panel for cable management, helping to keep wires organized and out of sight. The storage doors are equipped with soft-closing hinges to prevent pinching and reduce noise.
Detail shot of the pre-punched cable management hole located on the back panel of the OKD Luxury TV Stand, designed for organizing wires.
Operating Instructions
Electric Fireplace Operation
The built-in 30-inch electric fireplace provides warmth and ambiance. It features realistic dancing flames and burning log effects, creating an authentic fireplace experience. The fireplace can be operated with or without heat, making it suitable for all climates.
Close-up of the 30-inch electric fireplace insert, showing the realistic logs and flame effect, along with the remote control and key specifications like heating area and noise level.
Control the fireplace using the included remote control. Functions include:
- Flame Intensity: Adjust the brightness of the 3D realistic flame effect (4 brightness levels available).
- Heater: Turn the heating function on or off. The heater provides warmth for areas up to 500 sq. ft. and has a temperature control range of 62°-82°F.
- Timer: Set a turn-off timer for 1-8 hours. The fireplace also includes overheating safety protection.
The fireplace operates quietly, with a noise level of less than 40dB.
Maintenance
Cleaning and Care
- Engineered Wood Surfaces: Wipe with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the finish.
- Faux Marble Top: The melamine veneer faux marble top is water-resistant and easy to maintain. Clean spills immediately with a soft cloth. Do not use abrasive pads or cleaners that could scratch the surface.
- General Care: Regularly check all connections and hardware to ensure they remain tight. Avoid placing hot items directly on the surface without protection. Keep the unit away from direct sunlight and extreme temperature changes to prevent warping or fading.
Troubleshooting
- Assembly Difficulties: If you encounter issues during assembly, double-check the labeled parts against the instructions. Ensure all screws and dowels are correctly aligned before applying pressure. If a part, such as a plastic K piece, breaks, contact customer support for a replacement.
- Fireplace Not Functioning: Ensure the fireplace is properly plugged into a working electrical outlet. Check the remote control batteries. If the unit still does not operate, refer to the specific fireplace manual or contact customer support.
- Wobbly Unit: Ensure all screws and fasteners are tightened securely. Verify that the unit is placed on a flat, level surface.
For any issues not covered here, please contact OKD customer support for assistance.
Specifications
Diagram illustrating the key dimensions of the OKD Luxury 70-inch Fluted Fireplace TV Stand, including width, height, depth, and internal compartment measurements.
| Feature | Detail |
|---|---|
| Brand | OKD |
| Model Number | ILSC70FP30-NO |
| Material | Engineered Wood |
| Product Dimensions (L x W x H) | 70 x 15.2 x 32 inches |
| Item Weight | 156 pounds |
| Color | Natural Oak |
| Special Feature | Flame Effect (Electric Fireplace) |
| Fireplace Heating Area | Up to 500 Sq. Ft. |
| Fireplace Noise Level | <40dB |
| Included Components | TV Stand, Electric fireplace, Assembly instruction, Hardware Kit |
| Recommended Use | Indoor |
Warranty and Support
For specific warranty information, please refer to the documentation included with your product or contact OKD customer support directly. OKD offers various protection plans for purchase to extend coverage beyond the standard warranty period.
Customer Support: For assistance with assembly, parts, or product inquiries, please contact OKD-us, the seller. You can typically find their contact information on your purchase receipt or through the platform where the product was purchased.