JOINICE RKC006

JOINICE RKC006 Round Coffee Table with Storage Instruction Manual

Model: RKC006 | Brand: JOINICE

Introduction

Thank you for purchasing the JOINICE RKC006 Round Coffee Table with Storage. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and proper use of your new furniture. Please read this manual thoroughly before assembly and retain it for future reference.

Important Safety Information

  • Maximum Weight Recommendation: Do not exceed the maximum weight recommendation of 110 pounds (50 kg) on the tabletop to prevent tipping or damage. The internal shelf has a maximum weight capacity of 33 pounds (15 kg).
  • Stability: Always assemble and secure the table properly to ensure stability. Ensure all fasteners are tightened before use.
  • Placement: Place the coffee table on a flat, stable surface. Avoid placing it near heat sources or in direct sunlight to prevent material damage.
  • Children: Keep small parts and packaging materials away from children during assembly. Do not allow children to climb on or play with the table.
  • Tools: Use only the recommended tools for assembly. A screwdriver is required and not included.

Package Contents

Please verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

  • Tabletop (with lift mechanism pre-attached)
  • Base Frame
  • Fluted Side Panels
  • Sliding Cabinet Door
  • Bottom Shelf
  • Legs (4x)
  • Hardware Pack (screws, dowels, etc.)
  • Assembly Guide (this document)

Assembly Instructions

Assembly typically requires two people and a screwdriver (not included). Follow these steps carefully:

  1. Prepare the Area: Clear a spacious area for assembly. Lay down a blanket or cardboard to protect the floor and furniture parts from scratches.
  2. Attach Legs to Base: Secure the four legs to the bottom shelf using the provided hardware. Ensure they are firmly tightened. The adjustable foot pads should be at the bottom of the legs.
  3. Assemble the Main Body: Attach the fluted side panels and internal dividers to the base frame and bottom shelf according to the diagrams in the included assembly guide.
  4. Install Sliding Door: Carefully insert the curved sliding cabinet door into its designated track. Test its movement to ensure it slides smoothly.
  5. Attach Tabletop: Position the tabletop, which has the lift mechanism pre-attached, onto the main body. Secure it using the provided screws. Ensure the soft-close hinges are correctly aligned.
  6. Final Check: Verify all screws and fasteners are securely tightened. Gently test the lift-top mechanism and the sliding door.
Diagram showing the dimensions and weight capacity of the JOINICE RKC006 coffee table.

Image: Product dimensions and weight capacity. The table is 31.5 inches in diameter and 17.7 inches high. The top surface supports up to 110 lbs, and the internal shelf supports up to 33 lbs.

Operating Instructions

Using the Lift-Top Feature

The JOINICE RKC006 coffee table features a convenient lift-top design. To access the hidden storage compartment or to raise the tabletop for a comfortable working or dining surface:

  1. Grasp the edge of the tabletop firmly.
  2. Gently lift upwards. The hydraulic mechanism will assist in raising the top smoothly.
  3. To close, gently push the tabletop down. The soft-close hinges will ensure a controlled and quiet descent.
JOINICE RKC006 coffee table with the lift-top open, revealing internal storage space with folded blankets and a bowl of fruit on the stationary half.

Image: The coffee table with its lift-top open, showcasing the hidden storage compartment.

Close-up view of the soft-close hinges and flip-top design mechanism of the JOINICE RKC006 coffee table.

Image: Detail of the soft-close hinges and the flip-top design for safe and easy operation.

Using the Sliding Cabinet Door

The table includes a curved sliding cabinet door for easy access to the open storage shelf.

  1. To open, gently push the fluted panel section to the side along its curved track.
  2. To close, slide the panel back into its original position.
JOINICE RKC006 coffee table in a living room, showing the open lower shelf with decorative items and the fluted sliding door partially open.

Image: The coffee table with its sliding door revealing the open storage shelf.

Care and Maintenance

  • Cleaning: Wipe the surface with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as they can damage the walnut finish.
  • Spills: Clean up spills immediately to prevent staining. The walnut finish is waterproof, but prolonged exposure to liquids can cause damage.
  • Protection: Use coasters under drinks and placemats under hot items to protect the tabletop.
  • Tighten Fasteners: Periodically check and tighten all screws and fasteners to ensure the table remains stable.
  • Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or discoloration of the wood finish.

Troubleshooting

ProblemPossible CauseSolution
Table wobblesLoose fasteners; uneven floor; uneven legs.Check and tighten all screws. Adjust the foot pads on the legs to level the table on uneven surfaces.
Lift-top mechanism is stiff or noisyMechanism needs lubrication; obstruction.Apply a small amount of silicone lubricant to the moving parts of the lift mechanism. Ensure no items are obstructing the movement.
Sliding door does not move smoothlyTrack is dirty or obstructed; door is misaligned.Clean the sliding track of any debris. Ensure the door is properly seated in the track.
Scratches or minor damage to finishAccidental impact; abrasive cleaning.For minor scratches, use a wood repair marker or furniture polish matching the walnut finish. Prevent future damage by using coasters and avoiding abrasive materials.

Product Specifications

  • Brand: JOINICE
  • Model Name: RK006
  • Model Number: RKC006
  • Product Dimensions (D x W x H): 31.5" x 31.5" x 17.7"
  • Item Weight: 40.8 Pounds
  • Color: Walnut
  • Shape: Round
  • Material Type: Engineered Wood
  • Furniture Finish: Walnut
  • Maximum Weight Recommendation (Tabletop): 110 Pounds
  • Maximum Weight Recommendation (Shelf): 33 Pounds
  • Indoor/Outdoor Usage: Indoor
  • Tools Recommended For Assembly: Screw Driver (not included)
  • Included Components: Assembly Guide

Warranty and Support

JOINICE is committed to product quality. If you encounter any issues with your coffee table, please refer to the troubleshooting section or contact our customer support team. We stand behind the quality of our products and are available to assist with any concerns regarding assembly, missing parts, or product defects.

For support, please visit the JOINICE store on Amazon or contact us through the platform where you made your purchase.

Online Store: JOINICE Amazon Store

© 2025 JOINICE. All rights reserved.

Documents - JOINICE – RKC006

no relevant documents

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.