1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Bellemave Full XL Loft Bed with L-Shaped Desk and Storage Shelves. Please read this manual thoroughly before assembly and use to ensure safe and correct operation. Keep this manual for future reference.
The Bellemave Full XL Loft Bed is designed to maximize space, offering a comfortable sleeping area above an integrated L-shaped desk and multiple storage shelves. It features a heavy-duty metal frame for durability and stability.
2. Safety Information
WARNING: Failure to follow these warnings and instructions could result in serious injury or death.
- Ensure proper assembly according to the instructions provided. All parts must be securely fastened.
- Adhere to the recommended weight limit for the bed and desk components.
- This product is designed for children and teenagers. Adult supervision is recommended for younger users.
- The bed is equipped with protective guardrails on all four sides to prevent accidental falls. Do not remove or modify these guardrails.
- Use only a mattress that is appropriate for a Full XL size loft bed. Ensure the mattress thickness does not exceed the maximum recommended height to maintain guardrail effectiveness.
- Periodically check all connections and hardware to ensure they remain tight. Retighten as necessary.
- Do not allow children to play under the bed without supervision, especially during assembly.
- Do not attach or hang items on any part of the loft bed that are not designed for use with the bed, such as hooks, belts, or ropes, as they can pose a strangulation hazard.
- This product is certified by the Children's Product Certificate (CPC).
3. Package Contents
Your Bellemave Full XL Loft Bed is shipped in two separate boxes. Please ensure you have received both boxes before beginning assembly. Carefully unpack all components and verify against the parts list (typically found in the included assembly guide).
Common components include:
- Metal frame components (legs, side rails, bed base slats)
- L-shaped desk panels
- Storage shelf panels
- Built-in ladder components
- Guardrails
- Hardware pack (screws, bolts, nuts, Allen wrench)
- Assembly instruction guide
If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.
4. Setup and Assembly
Assembly typically requires two adults. Follow the step-by-step instructions provided in the separate assembly guide included with your product. Below are general guidelines:
- Preparation: Clear a spacious area for assembly. Lay out all parts and hardware. Ensure all components are present and undamaged.
- Frame Assembly: Begin by assembling the main metal frame structure, including the vertical posts and horizontal supports.
- Bed Base Installation: Attach the bed base slats to the frame. These steel slats provide mattress support and eliminate the need for a box spring.
- Guardrail Attachment: Securely attach the guardrails to all four sides of the bed frame.
- Ladder Installation: Install the built-in ladder, ensuring it is firmly attached and stable.
- Desk and Shelf Assembly: Assemble the L-shaped desk and storage shelves according to the instructions, attaching them to the main frame. The desk and shelves are made of thickened MDF board.
- Final Check: Once assembled, double-check all screws and bolts to ensure they are tightened securely.
Image: Fully assembled Bellemave Full XL Loft Bed with L-shaped desk and shelves, shown in a room.
Image: Diagram showing the dimensions of the Full XL Loft Bed, including height, length, width, and desk clearance.
Image: Angled view of the Bellemave Full XL Loft Bed, highlighting the L-shaped desk and integrated shelves.
Image: Close-up view showing the built-in ladder and the desk surface of the loft bed.
Video: An overview of the Bellemave Full XL Loft Bed with Desk, showcasing its features and design.
5. Operating Instructions
Using the Loft Bed
- Access the bed using the built-in ladder. Always face the ladder when climbing up or down.
- Ensure the mattress is properly positioned within the bed frame and does not obstruct the guardrails.
- Do not jump on the bed.
Using the L-Shaped Desk and Shelves
- The L-shaped desk provides a spacious workstation for studying, computing, or creative activities.
- The integrated shelves offer convenient storage for books, supplies, and personal items.
- Do not exceed the weight capacity for the desk (150 lbs) and each shelf (22 lbs).
Image: The loft bed in a room, showing the desk area set up for use with a laptop and chair.
6. Maintenance
- Cleaning: Wipe down the metal frame and MDF surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Hardware Check: Regularly inspect all bolts, screws, and connections. Tighten any loose hardware to maintain stability and safety.
- Weight Limits: Do not exceed the specified weight capacities for the bed, desk, and shelves.
- Moving the Bed: If you need to move the bed, it is recommended to disassemble it partially or fully to prevent damage to the frame or your flooring. Do not drag the bed.
Image: Close-up details of safety features including plastic covers on joints, non-slip foot mats, and safety guardrails.
7. Troubleshooting
- Wobbling or Instability:
- Ensure all bolts and screws are fully tightened.
- Verify that the bed is placed on a flat, even surface.
- Check if any components are bent or damaged.
- Missing Parts:
- Confirm you have received both shipping boxes.
- Refer to the parts list in your assembly guide. If parts are genuinely missing, contact customer support.
- Difficulty Assembling:
- Review the assembly instructions carefully.
- Ensure you are using the correct hardware for each step.
- Having a second person assist can significantly ease the assembly process.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | GZZ000046FXL |
| Size | Full XL |
| Product Dimensions (L x W x H) | 83.54" x 56" x 69.13" |
| Material | Heavy Duty Steel, MDF |
| Color | Black Frame, Wood Grain Desk/Shelves |
| Finish Type | Powder Coated (Metal) |
| L-Shaped Desk Weight Capacity | 150 LBS |
| Each Shelf Weight Capacity | 22 LBS |
| Under-Bed Clearance | 57.6" |
| Box Spring Required | No |
| Assembly Required | Yes |
| Target Audience | Children and Teenagers |
| Item Weight | 58 pounds |
| UPC | 733805496272 |
9. Warranty and Support
For warranty information or customer support, please refer to the contact details provided in your product packaging or visit the official Bellemave website. Please have your model number (GZZ000046FXL) and purchase date available when contacting support.
