Coolaado Wireless Multi-Platform Gaming Controller Instruction Manual

1. Product Overview

The Coolaado Wireless Gaming Controller is designed for versatile use across multiple platforms, offering both wireless Bluetooth 5.0 and wired USB-C connectivity. It features Hall Effect joysticks, programmable buttons, dual vibration motors, and 6-axis gyro motion control for an enhanced gaming experience. This controller is compatible with Nintendo Switch, PlayStation 3, PlayStation 4, PC (Windows 10 and above), iOS (MFI games), and Android devices.

Image 1.1: Coolaado Wireless Gaming Controller and accessories, including USB-C cable and back button covers.

Image 1.2: Detailed diagram of the controller's buttons and features, including the macro programming function for M1 and M2 buttons.

Key Features:

• Multi-Platform Compatibility: Supports Nintendo Switch, Switch Lite, Switch OLED, PS3, PS4, PC (Windows 10+), iOS (iPhone/iPad), and Android phones/tablets.
• Dual Connection Modes: Bluetooth 5.0 for wireless play and USB-C for wired connection.
• Advanced Controls: 360° Precision 3D Hall Effect Joysticks and linear triggers.
• Programmable Buttons: Two back buttons (M1, M2) for custom key mapping.
• Immersive Feedback: Dual vibration motors with 4 adjustable intensity levels (0%, 50%, 70%, 100%).
• Motion Sensing: 6-axis gyro sensor for precise motion control in compatible games.
• Convenience Functions: One-key wake-up for connected devices and one-click screenshot/long-press screen recording.
• Long Battery Life: Built-in 400mAh lithium battery provides up to 8-10 hours of gameplay on a 2-3 hour charge.
• Adjustable RGB Lighting: Customizable lighting modes for joysticks and buttons.

2. Setup and Connection

The Coolaado controller offers various connection methods depending on your device. Ensure the controller is sufficiently charged before initial use.

2.1 Charging the Controller

• Connect the included USB-C cable to the controller's charging port and the other end to a USB power source (e.g., computer, USB wall adapter).
• The charging indicator light will show charging status. A full charge typically takes 2-3 hours.

Image 2.1: Controller charging port and battery information, indicating 2-3 hours charging time and up to 10 hours playing time.

2.2 Wireless Connection (Bluetooth)

To connect wirelessly via Bluetooth, follow the specific pairing instructions for your device:

• Nintendo Switch/Switch Lite/OLED:
  Press and hold the ZR + HOME buttons simultaneously for 2 seconds until the pilot lamp turns green. The controller will enter pairing mode. On your Switch, navigate to 'Controllers' > 'Change Grip/Order' and wait for the controller to connect.
• iOS (iPhone/iPad) MFI Mode:
  Press and hold the A + HOME buttons simultaneously for 2 seconds until the pilot lamp turns purple. Enable Bluetooth on your iOS device and select the controller from the list of available devices.
• Android/Harmony OS (Standard Mode):
  Press and hold the Y + HOME buttons simultaneously for 2 seconds until the pilot lamp turns orange. Enable Bluetooth on your Android device and select the controller from the list of available devices.
• PC (Windows 10 and above, Bluetooth):
  Press and hold the R + HOME buttons simultaneously for 2 seconds until the pilot lamp turns cyan. On your PC, go to 'Bluetooth & other devices' settings, add a Bluetooth device, and select the controller. This mode supports X-Input games.

Image 2.2: Visual guides for connecting the controller to Switch, iOS/Android, and PC.

2.3 Wired Connection (USB-C)

For a wired connection, simply connect the controller to your device using the USB-C cable. This method is suitable for:

• Nintendo Switch: Plug the controller into the Switch dock's USB port.
• PS3/PS4: Connect the controller to the console's USB port.
• PC: Connect the controller to your PC's USB port. This supports X-Input and Steam games.

2.4 Connection Table Summary

Image 2.3: Comprehensive table detailing pairing patterns, pilot lamp colors, and notes for different operating systems and connection types.

3. Operating Instructions

3.1 Turbo Function

The controller supports both auto and manual turbo functions for rapid button presses.

• Setting Turbo: Press and hold the Turbo button, then press the desired action button (A/B/X/Y, L1/L2/R1/R2, D-pad directions) to enable manual turbo.
• Setting Auto Turbo: With manual turbo enabled for a button, press the Turbo button again while holding the action button to switch to auto turbo.
• Clearing Turbo: Press the Turbo button a third time while holding the action button, or press and hold the Turbo button and the Minus (-) button simultaneously to clear all turbo settings.
• Turbo Speed Adjustment: Press the Turbo button and move the Right Joystick Up/Down to adjust the turbo speed (8, 15, or 25 shoots/s).

Image 3.1: Visual guide for setting and adjusting turbo functions.

3.2 Vibration Adjustment

The controller features dual vibration motors with four intensity levels.

• Press the Vibration Adjustment button (usually located near the Home button) and move the Left Joystick Up/Down to cycle through vibration intensities: 0% (off), 50%, 70%, 100%.

3.3 Motion Control (6-Axis Gyro)

The built-in 6-axis gyro sensor allows for precise motion control in games that support this feature.

• Ensure the game you are playing supports motion controls.
• The controller will automatically activate motion sensing when connected to a compatible platform like Nintendo Switch.

Image 3.2: Controller features including wake-up, screenshot, and motion control.

3.4 Wake-Up and Screenshot Functions

• Wake-Up: Press the HOME button to wake up a previously connected device (e.g., Nintendo Switch) and automatically reconnect the controller.
• Screenshot: Press the Screenshot button (located near the D-pad) to capture a screenshot. Long-press the button to record screen video (functionality depends on the connected device).

3.5 Programmable Buttons (M1/M2)

The two back buttons, M1 and M2, can be programmed to replicate other button inputs for convenience.

• Programming: Press and hold the SET button (usually a small button on the back or bottom) until the indicator light flashes. Then press the M1 or M2 button you wish to program, followed by the button(s) you want it to mimic. Press SET again to save.
• Clearing: To clear a programmed button, repeat the programming steps but do not press any action buttons after selecting M1/M2, then press SET.

3.6 Adjustable RGB Lighting

The controller features customizable RGB lighting for the joysticks and buttons.

• Press the Light Adjustment button (usually located near the Home button) to cycle through different lighting modes: Rainbow Mode, Single Color Mode, and Light Off.

Image 3.3: Examples of adjustable RGB lighting modes on the controller.

4. Maintenance

4.1 Cleaning

• Use a soft, dry cloth to clean the controller's surface.
• Avoid using harsh chemicals, solvents, or abrasive materials.

4.2 Storage

• Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Avoid placing heavy objects on the controller.

4.3 Reset Function

If the controller becomes unresponsive or exhibits unusual behavior, a reset may resolve the issue.

• Locate the small reset hole on the back of the controller (refer to Image 1.2).
• Use a thin, pointed object (like a paperclip) to gently press the reset button inside the hole.
• The controller will power off. Reconnect it to your device following the setup instructions.

5. Troubleshooting

If you encounter issues with your Coolaado controller, please refer to the following common solutions:

6. Specifications

• Model: Z01 / Z01-S
• Connectivity: Bluetooth 5.0, USB-C Wired, (Optional 2.4G Receiver - Not Included)
• Battery: 400mAh Lithium Ion (included)
• Charging Time: Approximately 2-3 hours
• Playtime: Up to 8-10 hours (depending on usage)
• Dimensions: 6.69 x 4.8 x 2.52 inches
• Item Weight: 9.6 ounces
• Manufacturer: Coolaado
• Date First Available: May 7, 2024

7. Warranty and Support

For warranty information or technical support, please refer to the retailer where you purchased the product or contact Coolaado customer service directly. Contact details are typically provided on the product packaging or the official Coolaado website.