1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your ASUS ROG Keris II Ace Wireless Gaming Mouse. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your gaming experience.
2. Package Contents
Verify that all items are present in your product package:
- ASUS ROG Keris II Ace Wireless Gaming Mouse
- ROG Polling Rate Booster
- Wireless Receiver (USB dongle)
- USB Dongle Extender
- Mouse Grip Tape Set
- USB-C to USB-A Cable (for charging and wired connection)
3. Product Overview
Familiarize yourself with the components and features of your ROG Keris II Ace mouse.
Figure 3.1: Top view of the ROG Keris II Ace mouse, highlighting its clean design and illuminated scroll wheel.
Figure 3.2: Ergonomic design features, including smooth, rounded construction, an elevated hump for palm support, and contoured PBT left/right buttons.
Figure 3.3: Side view of the mouse, illustrating the placement of the programmable side buttons.
Figure 3.4: ROG Optical Micro Switches provide consistent, instant actuation and a long lifespan.
4. Setup
4.1. Charging the Mouse
Before first use, it is recommended to fully charge the mouse. Connect the provided USB-C to USB-A cable to the mouse's front port and to a powered USB port on your computer or a USB charger. The scroll wheel LED indicates charging status.
Figure 4.1: Connecting the USB-C cable for charging or wired mode.
4.2. Tri-Mode Connectivity
The ROG Keris II Ace supports three connection modes: 2.4 GHz RF Wireless, Bluetooth, and USB-C Wired.
4.2.1. 2.4 GHz RF Wireless Mode
- Locate the wireless receiver (USB dongle) and the USB dongle extender.
- For optimal signal, connect the wireless receiver to the USB dongle extender, then plug the extender into a USB port on your computer. This positions the receiver closer to the mouse.
- Turn on the mouse using the switch on the bottom. Ensure it is set to 2.4 GHz mode.
- The mouse should automatically connect. If not, press and hold the pairing button on the bottom of the mouse until the LED indicator blinks, then press the pairing button on the receiver.
4.2.2. Bluetooth Mode
- Turn on the mouse and set the switch on the bottom to Bluetooth mode.
- Press and hold the pairing button on the bottom of the mouse until the LED indicator blinks rapidly.
- On your computer or device, go to Bluetooth settings and select the ROG Keris II Ace from the list of available devices to pair.
4.2.3. USB-C Wired Mode
Connect the provided USB-C to USB-A cable from the mouse to a USB port on your computer. The mouse will automatically switch to wired mode and begin charging.
5. Operating Instructions
5.1. DPI Adjustment
The ROG Keris II Ace features an ROG AimPoint Pro 42K Sensor. DPI (Dots Per Inch) can be adjusted using the dedicated DPI button, typically located on the bottom of the mouse or programmable via software. Cycle through preset DPI stages or customize them using the Armoury Crate software.
Figure 5.1: ROG AimPoint Pro Sensor capabilities, including high DPI and track-on-glass technology.
5.2. Polling Rate
The mouse supports a high polling rate for responsive performance. With the ROG Polling Rate Booster, you can achieve 4K Hz wirelessly and 8K Hz in wired mode. Ensure the booster is connected for these rates.
Figure 5.2: The ROG Polling Rate Booster enhances response times.
5.3. Customization with Armoury Crate
Download and install the ASUS Armoury Crate software from the official ASUS website to unlock full customization options. This software allows you to:
- Program buttons
- Adjust DPI stages
- Configure polling rate
- Customize lighting effects
- Monitor battery life
- Update firmware
6. Maintenance
6.1. Cleaning
To clean your mouse, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the mouse. Avoid abrasive cleaners or solvents.
6.2. Battery Care
To prolong battery life, avoid fully discharging the mouse frequently. Charge the mouse when the battery indicator suggests it. Store the mouse in a cool, dry place when not in use for extended periods.
6.3. Grip Tape Application
The included grip tape set can be applied to the mouse for enhanced grip and to protect the surface. Ensure the mouse surface is clean and dry before applying the tapes for optimal adhesion.
7. Troubleshooting
If you encounter issues with your ROG Keris II Ace mouse, refer to the following common solutions:
| Problem | Possible Solution |
|---|---|
| Mouse not responding (Wireless) |
|
| Mouse not responding (Bluetooth) |
|
| Cursor erratic or unresponsive |
|
| Battery drains quickly |
|
| Armoury Crate software not detecting mouse |
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | P714 ROG KERIS II WL ACE/WHT |
| Connectivity | 2.4 GHz RF, Bluetooth 5.1, USB-C Wired |
| Sensor | ROG AimPoint Pro Optical Sensor |
| Max DPI | 42,000 DPI |
| Max Speed | 750 IPS |
| Max Acceleration | 50g |
| Switches | ROG Optical Micro Switches (100 million click lifecycle) |
| Polling Rate (Wireless) | Up to 4K Hz (with Polling Rate Booster) |
| Polling Rate (Wired) | Up to 8K Hz (with Polling Rate Booster) |
| Battery Life | Up to 95 hours (average) |
| Weight | Approximately 54g (1.6 ounces) |
| Dimensions (LxWxH) | 4.4 x 3.1 x 0.1 inches (approximate) |
| Operating System Support | Windows, PC/Mac |
| Power Source | Battery Powered (1 Lithium Ion battery included) |
9. Warranty and Support
For warranty information and technical support, please visit the official ASUS support website or contact your regional ASUS customer service. Keep your proof of purchase for warranty claims.
