Escape Wireless Stereo Headphones

Introduction

Thank you for choosing the Escape Wireless Stereo Headphones, Model BTAC866. These headphones utilize advanced air conduction technology to provide clear audio while allowing you to remain aware of your surroundings. Designed for comfort and convenience, they feature intuitive touch controls and a built-in microphone for hands-free calls. This manual provides instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.

Package Contents

• Escape Wireless Stereo Headphones (BTAC866)
• USB Charging Cable
• User Manual

Product Overview

Familiarize yourself with the components of your Escape Wireless Stereo Headphones.

Figure 1: Front view of the Escape BTAC866 Wireless Stereo Headphones. This image highlights the open design that rests comfortably around the ear, the integrated microphone, and the touch control area on the earpiece. The white color of the headphones is visible.

Figure 2: Packaging for the Escape BTAC866 Wireless Stereo Headphones. The box displays key features such as "Open Design," "Wireless with Microphone," "Touch Control," and "Compatible with Bluetooth Enabled Devices." The headphones are shown within the packaging.

Key Features:

• Air Conduction Technology: Delivers sound without blocking the ear canal, maintaining situational awareness.
• Touch Controls: Intuitive controls for music playback and call management.
• Built-in Microphone: Enables clear hands-free calls.
• Bluetooth Connectivity: Seamless wireless pairing with compatible devices.
• Open Concept Design: Provides comfort for extended wear.

Setup

1. Charging the Headphones

1. Locate the charging port on the headphones.
2. Connect the supplied USB charging cable to the headphones and a compatible USB power source (e.g., computer USB port, wall adapter).
3. The LED indicator will illuminate to show charging status. It will typically turn off or change color once fully charged.
4. Allow approximately 1-2 hours for a full charge before first use.

2. Bluetooth Pairing

1. Power On: Press and hold the touch control area on the headphones until the LED indicator flashes, usually blue and red, indicating pairing mode.
2. Activate Bluetooth: On your device (smartphone, tablet, computer), go to the Bluetooth settings and ensure Bluetooth is enabled.
3. Select Device: In the list of available Bluetooth devices, locate and select "Escape BTAC866" (or similar name).
4. Confirm Connection: Once paired, the LED indicator on the headphones will typically show a solid blue light or flash slowly. A voice prompt may also confirm the connection.
5. If prompted for a password, enter "0000".

Note: The headphones will automatically attempt to reconnect to the last paired device when powered on.

Operating Instructions

The Escape BTAC866 headphones feature intuitive touch controls. The specific touch gestures may vary slightly, but common functions are listed below.

Maintenance

• Cleaning: Use a soft, dry, lint-free cloth to clean the headphones. Do not use abrasive cleaners, alcohol, or chemical solvents.
• Storage: Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
• Water Exposure: These headphones are not waterproof. Avoid exposure to water or excessive moisture.
• Charging: Charge the headphones regularly, even if not in use, to maintain battery health.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or contact Escape customer service. Contact details can typically be found on the product packaging or the official Escape website.