roborock Qrevo Plus Robot Vacuum and Mop User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your roborock Qrevo Plus Robot Vacuum and Mop. Please read this guide thoroughly before using the product to ensure optimal performance and safety.

Key Features:

• All-in-One Multifunctional Dock: Features automatic mop washing, dynamic speed and water flow adjustment, a 2.7L dust bag for up to 7 weeks of hands-free cleaning, a 4L clean water tank covering 3,552 sqft, a removable dock base, and quick-charge capability.
• Superior Edge Mopping: FlexiArm Design extends to clean edges, table legs, walls, and narrow gaps, achieving 98.8% edge coverage with 1.85mm proximity.
• Dual Power Cleaning: Dual spinning mops rotate at 200 RPM with 30 adjustable water flow levels. The mop module lifts 10mm to prevent wetting carpets.
• Powerful Suction: 7,000 Pa suction power for deep carpets and floor crevices. Main brush speed increases by 10% for efficiency. All-rubber spiral brush design prevents tangling.
• Reactive Tech Obstacle Avoidance: Structured light technology provides millimeter-level precision in obstacle detection and navigation.
• Smart Carpet Care: Carpet First mode sweeps identified carpets before mopping. Automatically sweeps carpets twice for deep cleaning and uses ultrasonic sensors to boost suction.
• Voice Control & Smart Connectivity: Compatible with Amazon Alexa, Apple Siri, and Google Home. Roborock App offers quick mapping, 3D mapping, multi-floor mapping, scheduling, and customizable cleaning.

Included Components:

• Robot Vacuum (1)
• Multifunctional Dock (1)
• Dock Base (1)
• Power Cable (1)
• Disposable Dust Bag (1)
• Rotating Mop Module (2)
• Instruction Guide

2. Setup

2.1 Unboxing and Placement

1. Carefully remove all components from the packaging.
2. Place the multifunctional dock on a hard, level surface against a wall. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front of the dock for optimal robot navigation.
3. Connect the power cable to the dock and plug it into a power outlet. Ensure the cable is neatly tucked away to prevent entanglement.

2.2 Initial Charging

Place the robot vacuum onto the dock. The robot will automatically align and begin charging. For first-time use, it is recommended to fully charge the robot before its initial cleaning cycle.

2.3 Water Tank and Dust Bag Installation

1. Open the clean water tank cover on the dock and fill it with clean tap water. You may add roborock brand cleaning solution if desired.
2. Ensure the disposable dust bag is correctly installed in the dock's dustbin compartment.
3. Attach the rotating mop modules to the bottom of the robot.

2.4 App Installation and Pairing

1. Download the 'Roborock' app from your smartphone's app store (iOS or Android).
2. Open the app and create an account or log in.
3. Follow the in-app instructions to add your roborock Qrevo Plus device. This typically involves pressing and holding specific buttons on the robot to enter pairing mode and connecting to its temporary Wi-Fi network.
4. Once paired, the app will guide you through initial mapping of your home.

3. Operation

3.1 Starting a Cleaning Cycle

You can start a cleaning cycle in several ways:

• Via Roborock App: Tap 'Clean' on the main screen. You can select specific rooms, zones, or customize cleaning modes (Vacuum, Mop, or Vacuum & Mop).
• On the Robot: Press the power button once to start a full cleaning cycle.
• Voice Control: Use compatible voice assistants (Amazon Alexa, Apple Siri, Google Home) with commands like "Alexa, ask roborock to start cleaning."

3.2 Cleaning Modes and Features

The roborock Qrevo Plus offers advanced cleaning capabilities:

• Unified Vacuuming and Mopping: The robot simultaneously vacuums with 7,000 Pa suction and mops with dual spinning mops rotating at 200 RPM. The app allows 30 adjustable water flow levels.

• FlexiArm Design Edge Mopping: The mop extends automatically to clean close to edges, walls, and furniture legs, ensuring comprehensive coverage.

• Reactive Tech Obstacle Avoidance: Utilizes structured light technology to detect and navigate around obstacles, preventing collisions and getting stuck.

• Smart Carpet Care: The 10mm liftable mop module automatically raises when a carpet is detected. In Carpet First mode, the robot vacuums carpets before mopping hard floors. It can also boost suction on carpets for deeper cleaning.

3.3 Advanced App Control

The Roborock App provides comprehensive control over your cleaning experience:

• Quick Mapping & 3D Mapping: Utilizes PreciSense LiDAR Navigation to scan and create detailed 2D and 3D maps of your home up to 6 times faster.

• Multi-Floor Mapping: Supports mapping for up to 4 different floor levels.
• Scheduling: Set specific cleaning times and routines for different areas.
• Customization: Adjust cleaning intensity, water flow, and create no-go zones or virtual walls.
• Temporary Cleaning & AI Smart Plan: Manage immediate cleaning needs or let the AI optimize cleaning routes.
• Auto Drying & Mop-Washing Modes: Control dock functions directly from the app.

3.4 Voice Control

Integrate your roborock Qrevo Plus with smart home systems for hands-free control:

• Compatible Devices: Amazon Alexa, Apple Siri, Google Home.
• Commands: Use simple voice commands to start, stop, or send the robot back to its dock.

4. Maintenance

Regular maintenance ensures your roborock Qrevo Plus operates efficiently and extends its lifespan.

4.1 Multifunctional Dock Maintenance

• Auto Dust Emptying: The 2.7L dust bag in the dock can hold debris for up to 7 weeks. Replace the dust bag when the app indicates it is full.
• Auto Mop Washing: The dock automatically washes the robot's mops. Ensure the clean water tank is filled and the dirty water tank is emptied regularly.
• Warm Air Drying: After washing, the mops are dried with warm air to prevent odors and mildew.
• Auto Tank Refilling: The dock refills the robot's water tank from its 4L clean water tank. Monitor the clean water tank level and refill as needed.
• Detachable Dock Base: The entire dock base can be easily removed for thorough cleaning of accumulated dirt or debris.

4.2 Robot Maintenance

• Main Brush: Regularly check the main brush for tangled hair or debris. Use the cleaning tool provided to remove any obstructions.
• Side Brush: Inspect the side brush for wear or damage. Replace if necessary.
• Filters: The robot uses a washable filter. Clean it periodically by rinsing under water and allowing it to air dry completely before reinstallation. Replace the filter every 3-6 months depending on usage.
• Sensors: Wipe all sensors (cliff sensors, wall sensors, LiDAR sensor) with a soft, dry cloth to ensure accurate navigation.
• Mop Pads: Remove and wash the mop pads after each use, or allow the dock to perform automatic washing. Replace worn mop pads as needed.

5. Troubleshooting

If you encounter issues with your roborock Qrevo Plus, refer to the following common problems and solutions:

For more detailed troubleshooting or persistent issues, please refer to the Roborock App or contact customer support.

6. Specifications

7. Warranty & Support

7.1 Warranty Information

The roborock Qrevo Plus comes with a limited manufacturer's warranty. Please refer to the warranty card included in your product packaging or visit the official roborock website for detailed terms and conditions, including coverage period and exclusions.

7.2 Customer Support

For technical assistance, product inquiries, or warranty claims, please contact roborock customer support through one of the following methods:

• Official Website: Visit us.roborock.com for FAQs, support articles, and contact forms.
• Roborock App: Access support features directly within the app.
• Email Support: Refer to your product documentation for the specific support email address.

When contacting support, please have your product model (Qrevo Plus) and serial number ready.