INFANS 2 in 1 Baby Stroller

INFANS 2-in-1 Baby Stroller and Bassinet Pram Instruction Manual

Model: 2 in 1 Baby Stroller

Introduction

Thank you for choosing the INFANS 2-in-1 Baby Stroller and Bassinet Pram. This manual provides essential information for the safe assembly, operation, and maintenance of your product. Please read all instructions carefully before use and retain this manual for future reference.

This versatile product functions as both a high landscape toddler stroller and a comfortable bassinet pram, designed to adapt to your child's needs from birth up to 3 years old (or 50 pounds).

INFANS 2-in-1 Baby Stroller in green, shown in both upright stroller mode and bassinet mode.

Image: The INFANS 2-in-1 Baby Stroller, illustrating its primary configurations as a stroller and a bassinet pram.

Safety Information

Always prioritize your child's safety. Failure to follow these instructions could result in serious injury or death.

  • Never leave your child unattended in the stroller or bassinet.
  • Ensure all locking mechanisms are engaged before placing a child in the stroller.
  • Always use the 5-point safety harness when your child is in the stroller seat.
  • Do not overload the storage basket or attach items to the handle that could cause the stroller to tip.
  • Avoid placing hot liquids in the cup holder to prevent spills and burns.
  • Do not use this product on stairs or escalators.
  • The stroller is designed for one child only.
  • Maximum weight capacity for the stroller is 50 pounds.

Setup and Assembly

Follow these steps to assemble your INFANS 2-in-1 Baby Stroller.

Component Checklist:

  • Stroller Frame
  • Seat/Bassinet Unit
  • Front Wheels (2)
  • Rear Wheels (2)
  • Cup Holder
  • Foot Cover
  • Stylish Tote Bag (accessory)

Assembly Steps:

  1. Unfold the Frame: Release the folding latch and lift the handle until the frame locks into place. Ensure it is fully extended and stable.
  2. Attach Rear Wheels: Slide the rear wheels onto the axles until they click securely. Pull on the wheels to ensure they are firmly attached.
  3. Attach Front Wheels: Insert the front wheel assemblies into the designated slots on the front of the frame until they click. Verify secure attachment.
  4. Install Seat/Bassinet Unit: Align the connectors on the seat/bassinet unit with the mounting points on the stroller frame. Press down firmly until you hear a click, indicating it is locked. Ensure the unit is facing the desired direction (forward or parent-facing).
  5. Attach Canopy: Secure the canopy to the seat/bassinet unit using the provided attachments.
  6. Attach Cup Holder: Clip the cup holder onto the designated attachment point on the handlebar.
Diagram showing the three steps of folding the stroller: upright, partially folded, and fully folded.

Image: Visual guide demonstrating the easy folding mechanism of the stroller.

Operating Instructions

Converting Between Stroller and Bassinet Modes:

The 2-in-1 unit can be configured as a bassinet for infants or a seat for toddlers. To convert, adjust the straps and buckles located underneath the seat unit to flatten it into a bassinet or raise it into a seat position. Ensure all fasteners are securely engaged for the chosen mode.

Three images showing the stroller in bassinet mode, forward-facing mode, and parent-facing mode.

Image: The three functional modes of the stroller: Bassinet Mode, Forward Facing, and Parent Facing.

Reversible Seat Function:

The seat/bassinet unit can be reversed to face either the parent or the world. To reverse, disengage the unit from the frame by pressing the release buttons on both sides of the seat attachment points. Lift the unit, rotate it 180 degrees, and re-attach it to the frame until it clicks securely.

Two images showing the stroller with the baby facing inside towards the parent and facing outside away from the parent.

Image: Demonstrates the reversible seat feature, allowing the child to face the parent or the environment.

Adjusting the Backrest and Recline:

The backrest offers multiple recline positions: 120° (sitting), 135° (semi-recline), and 180° (sleeping bassinet mode). Locate the recline adjustment lever or strap behind the seat and adjust to the desired angle. Ensure the backrest is securely locked in position before use.

Diagram showing the adjustable backrest with angles for sitting (120°), semi-recline (150°), and sleeping (180°).

Image: Illustration of the adjustable backrest, detailing the 120°, 150°, and 180° recline positions.

Canopy Adjustment and Features:

The canopy is adjustable to provide optimal shade and protection. It features a UPF 50+ sun canopy and a peek-a-boo window. Extend or retract the canopy as needed. Use the peek-a-boo window to check on your child without disturbing them.

Close-up images of the adjustable canopy, UPF 50+ sun canopy, and peek-a-boo window.

Image: Details of the adjustable canopy, including its UPF 50+ sun protection and integrated peek-a-boo window.

Wheel Operation and Brakes:

The front wheels feature 360-degree rotation for easy maneuverability and can be locked for straight-line travel. The rear wheels have a foot-activated brake system. To engage the brake, press down on the brake pedal located near the rear wheels until it locks. To release, lift the pedal.

Diagram illustrating the 360° front wheel rotation and the lockable rear wheels with enhanced suspension.

Image: Explanation of the stroller's wheel features, including 360° swivel front wheels and lockable rear brakes with suspension.

Folding and Unfolding:

The stroller features a one-hand folding mechanism for convenience. To fold, ensure the seat is in an upright position (if applicable), then locate the folding buttons/levers on the handlebar. Press and hold the buttons, then push the handlebar forward and down until the stroller collapses. To unfold, release the latch and lift the handlebar until the frame locks into place.

A hand demonstrating the one-hand fold mechanism on the stroller handle, followed by images of the stroller in upright, partially folded, and fully folded positions.

Image: Step-by-step visual guide for the one-hand folding operation of the stroller.

Using the 5-Point Safety Belt:

Always secure your child with the 5-point safety harness. Place your child in the seat, bring the shoulder straps over their shoulders, and the waist straps around their hips. Connect the buckles into the central locking mechanism until you hear a click. Adjust the straps for a snug, secure fit without being too tight.

Storage Basket and Cup Holder:

The large under-seat storage basket is suitable for carrying essential items. Do not exceed the recommended weight limit for the basket. The cup holder is designed to hold beverages securely; ensure cups are properly seated to prevent spills.

Four close-up images showing the 5-point safety belt, cup holder, removable armrest, and large-capacity storage space.

Image: Detailed views of key features: 5-point safety belt, cup holder, removable armrest, and spacious storage basket.

Maintenance

Cleaning Instructions:

  • Fabric Parts: The Oxford fabric is durable and non-toxic. Spot clean with a damp cloth and mild soap. Allow to air dry completely. Do not machine wash or tumble dry.
  • Frame: Wipe the aluminum alloy and iron pipe frame with a soft, damp cloth. Dry thoroughly to prevent rust.
  • Wheels: Periodically clean debris from the wheels and axles. Lubricate moving parts with a silicone-based lubricant if necessary to ensure smooth operation.
Image highlighting the skin-friendly Oxford material used in the stroller, with a 'Safe & Non-toxic' label.

Image: Emphasizes the use of skin-friendly, safe, and non-toxic Oxford fabrics in the stroller's construction.

Storage:

When not in use, store the stroller in a clean, dry place away from direct sunlight and extreme temperatures. Ensure it is folded correctly to save space.

Troubleshooting

  • Stroller does not fold/unfold smoothly: Check for any obstructions in the folding mechanism. Ensure the seat is in the correct position for folding. Apply a small amount of silicone lubricant to moving parts if resistance persists.
  • Wheels are stiff or squeaky: Clean any dirt or debris from the wheel axles. Apply a silicone-based lubricant to the wheel bearings. Ensure the wheel locks are fully disengaged.
  • Seat/Bassinet unit is not secure: Verify that the unit is correctly aligned with the frame's mounting points and that both release buttons have clicked into place.
  • Brake not engaging/disengaging: Check for debris around the brake mechanism. Ensure the brake pedal is fully depressed or lifted.

Specifications

FeatureDetail
Model Number2 in 1 Baby Stroller
BrandINFANS
ColorGreen
MaterialsAluminum alloy, Iron pipe, PP, Oxford fabric
Age RangeBaby (0-3 years)
Maximum Weight Recommendation50 Pounds
Harness Type5-Point
Number of Wheels4
Item Weight25 Pounds
Item Dimensions (L x W x H)37"L x 18"W x 39"H
Folded Size22.5"L x 13.5"W x 30"H
Included ComponentsCup holder, under seat basket, foot cover, stylish tote bag
Diagram showing the dimensions of the INFANS 2-in-1 Baby Stroller in both upright and folded configurations.

Image: Detailed product dimensions for the stroller in both open and folded states.

Warranty and Support

INFANS products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official INFANS website. Keep your proof of purchase for warranty claims.

For technical support, replacement parts, or any questions regarding your INFANS 2-in-1 Baby Stroller, please contact INFANS customer service. Contact details can typically be found on the product packaging or the official INFANS brand store online.

Note: No official product videos were provided in the product data for embedding in this manual.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.