1. Introduction
Welcome to the user manual for your Beyio Model 019 Electric Water Dispenser. This device is designed to provide convenient and efficient water dispensing from various bottle sizes, ideal for home, office, travel, and camping. Please read these instructions carefully before use to ensure proper operation and maintenance.
2. Safety Information
Your safety is our priority. Please observe the following guidelines:
- The water dispenser is constructed from high-quality, BPA-free plastic, a food-grade silicone hose, and a 304 stainless steel water outlet pipe.
- All components that come into contact with water are made from food-grade materials to ensure safe drinking water.
- Only use a 5V 2A USB charger for recharging the device. Using an incompatible charger may damage the unit or pose a safety risk.
- Do not immerse the main dispenser unit in water.
- Keep out of reach of children when not in use or during charging.
3. Product Components
Your Beyio Electric Water Dispenser package includes the following items:
- 1x Electric Water Dispenser Unit (Black)
- 1x Stainless Steel Outlet Pipe
- 1x Food-Grade Silicone Hose (approx. 20.5 inches)
- 1x USB Charging Cable
- 1x Anti-Floating Head (for silicone hose)
4. Setup Instructions
Follow these steps for initial setup:
- Attach the Stainless Steel Outlet Pipe: Firmly insert the stainless steel pipe into the designated outlet on the main dispenser unit. Ensure a snug fit to prevent leaks.
- Connect the Silicone Hose: Insert one end of the food-grade silicone hose into the bottom inlet of the dispenser unit.
- Install the Anti-Floating Head: Attach the anti-floating head to the other end of the silicone hose. This helps keep the hose submerged in the water bottle.
- Place on Water Bottle: Remove the cap from your water bottle (compatible with 2.16-inch screw caps or crown caps). Insert the silicone hose with the anti-floating head into the bottle. Place the dispenser unit securely on the bottle mouth.
Initial Charging
Before first use, fully charge the dispenser using the provided USB cable. The 1200 mAh rechargeable battery typically takes 3 hours to fully charge and can dispense 4-5 five-gallon water bottles on a single charge.
5. Operating Instructions
Using your Beyio water dispenser is simple:
- Dispensing Water: Press the power button on the top of the dispenser once to start water flow.
- Automatic Stop: The dispenser will automatically stop after 60 seconds to prevent water waste.
- Continuous Flow: For continuous water dispensing beyond 60 seconds, press and hold the power button for 3 seconds.
- Stopping Manually: Press the power button again at any time to stop the water flow.
Compatibility
The Beyio water dispenser is highly compatible with various water bottle types, including those with 2.16-inch screw caps or crown caps. It supports capacities such as 1.5L, 5.7L, 10L, 11.3L, 15L, and 18.9L (equivalent to 5-gallon bottles).
6. Maintenance
To ensure the longevity and hygiene of your water dispenser, follow these maintenance tips:
- Cleaning Hose and Pipe: Regularly clean the silicone hose and stainless steel pipe with warm, soapy water. Rinse thoroughly with clean water before reassembling.
- Exterior Cleaning: Wipe the exterior of the dispenser unit with a damp cloth. Do not submerge the main unit in water.
- Charging Port: Keep the USB charging port dry and free from dust or debris.
7. Troubleshooting
If you encounter any issues with your Beyio water dispenser, refer to the table below for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No water dispensed | Battery low; Hose not submerged; Unit not properly seated | Charge the battery; Ensure hose is at the bottom of the bottle; Re-seat the dispenser firmly on the bottle |
| Slow water flow | Battery low; Hose kinked or blocked | Charge the battery; Check and straighten the hose; Clean the hose and filter (if applicable) |
| Leaking from spout/base | Spout not firmly inserted; Unit not sealed properly on bottle | Ensure stainless steel spout is fully inserted and the white clip is secure; Re-seat the dispenser on the bottle, ensuring a tight fit |
| Unit stops unexpectedly | Automatic 60-second shut-off; Battery low | Press the button again to resume; For continuous flow, press and hold for 3 seconds; Charge the battery |
8. Specifications
Detailed technical specifications for your Beyio Model 019 Water Dispenser:
| Feature | Detail |
|---|---|
| Brand | Beyio |
| Model Number | 019 |
| Color | Black |
| Material | Polypropylene (PP) |
| Capacity Compatibility | 1.5L, 5.7L, 10L, 11.3L, 15L, 18.9L (5 Gallons) |
| Product Dimensions | 5.4"D x 3.27"W x 3.46"H |
| Wattage | 4 watts |
| Power Source | Battery Powered (1200 mAh rechargeable) |
| Charging Input | 5V 2A USB (charger not included) |
| Installation Type | Freestanding |
| Access Location | Bottom |
Official Product Video
This official video provides a comprehensive overview of the Beyio 5 Gallon Electric Water Dispenser, demonstrating its features and ease of use.
9. Warranty and Support
For warranty information and customer support, please refer to the product packaging or contact Beyio customer service directly. Keep your purchase receipt for any warranty claims.
