VINGLI Padded Zero Gravity Chair Instruction Manual

1. Safety Information

IMPORTANT: Please read all safety information before using the VINGLI Padded Zero Gravity Chair.

• MAXIMUM WEIGHT CAPACITY: 300 lbs. DO NOT EXCEED.
• Always ensure the chair is placed on a stable and level surface, especially when reclined.
• Keep hands and fingers clear of moving parts during unfolding, folding, and adjustment to prevent pinching.
• Do not allow children to play on or around the chair unsupervised.
• Inspect the chair regularly for any signs of wear or damage. Discontinue use if any damage is found.

2. Setup

Your VINGLI Padded Zero Gravity Chair comes fully assembled and ready to use. Follow these steps to unfold and prepare your chair for relaxation.

1. Remove the chair from its packaging.
2. Gently pull the armrests apart to begin unfolding the chair.
3. Continue to unfold until the chair is fully extended and stable on all four legs. Ensure all locking mechanisms are disengaged during unfolding.
4. Attach the removable headrest pillow by sliding its elastic straps over the top of the chair's backrest. Adjust its position for optimal comfort.
5. If using the padded cushion, place it onto the chair and secure it using the integrated ties to prevent it from shifting.
6. Attach the side tray by aligning its clips with the designated slots on the armrest and pressing firmly until it clicks into place.

3. Operating Instructions

The VINGLI Zero Gravity Chair offers multiple reclining positions for personalized comfort.

3.1 Adjusting Recline Positions

1. To recline, gently push back on the armrests while applying slight pressure with your feet on the footrest. The chair will smoothly glide into your desired position.
2. To return to an upright position, push forward with your feet and lean slightly forward.

3.2 Locking Mechanism

Once you have found your preferred reclining position, use the locking mechanisms to secure the chair.

1. Locate the two locking levers, one on each side beneath the armrests.
2. While in your desired position, push the levers upwards to engage the lock. This will prevent the chair from moving.
3. To unlock, simply push the levers downwards.

3.3 Using the Side Tray

The removable side tray provides convenient storage for your personal items.

• The tray features a cup holder and a slot for your phone or tablet.
• Ensure the tray is securely attached before placing items on it.

3.4 Headrest Pillow

The headrest pillow is adjustable and removable for customized neck and head support.

• Slide the pillow up or down along the backrest to find your ideal position.
• To remove, simply slide it off the top of the backrest.

3.5 Video Demonstration: Backrest Adjustment

Video 3.1: This video demonstrates the operation of the backrest adjustment and locking mechanism for the VINGLI Zero Gravity Chair.

4. Maintenance

Proper maintenance will extend the life and appearance of your VINGLI Zero Gravity Chair.

4.1 Cushion Care

• The thick padded cushion is removable. It is recommended to spot clean with mild soap and water. Allow to air dry completely.
• For prolonged life, store the cushion indoors when not in use or during inclement weather.

4.2 Frame Cleaning

• Wipe the frame with a damp cloth and mild detergent. Rinse thoroughly and dry completely to prevent rust.
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.

4.3 Storage

• The chair features a foldable design for compact storage. Fold the chair completely and store it in a dry, protected area when not in use for extended periods.

5. Troubleshooting

If you encounter any issues with your VINGLI Zero Gravity Chair, please refer to the following common solutions:

• Difficulty Reclining/Locking: Ensure the locking levers are fully disengaged before attempting to recline. If the chair still sticks, check for any obstructions in the mechanism.
• Instability: Verify that the chair is fully unfolded and all legs are firmly on a level surface. Avoid placing the chair on uneven ground.
• Cushion Shifting: Ensure the cushion's ties are securely fastened to the chair frame.

If problems persist, please contact VINGLI Customer Support for assistance.

6. Specifications

7. Customer Support

For any questions, concerns, or warranty inquiries regarding your VINGLI Padded Zero Gravity Chair, please contact VINGLI Customer Support.

• Refer to your product packaging or the retailer's website for the most current contact information.
• Please have your model number (VLG56000231) and purchase date available when contacting support.