1. Safety Instructions
Please read all instructions carefully before assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- Ensure all components are present and undamaged before assembly.
- Keep children and pets away from the desk during operation.
- Do not sit or stand on the desk.
- Do not place hands or fingers near moving parts during height adjustment.
- Ensure there are no obstructions above or below the desk during movement.
- Connect the power cord to a grounded outlet.
- Do not disassemble or modify the motor or control box. Contact customer support for service.
- Maximum weight capacity is 176 pounds (80 kg). Do not exceed this limit.
2. Package Contents
Verify that all parts are included in your package. If any parts are missing or damaged, please contact Mondeer customer support.
- Desktop sections
- Desk legs (2)
- Foot pads (2)
- Control box
- Control panel
- Power adapter and cable
- Headphone hook
- Cup holder
- Cable management tray
- Assembly hardware (screws, Allen wrenches, etc.)
- Optional: Caster wheels (4)
3. Assembly Instructions
Assembly typically requires one person and includes all necessary tools. Follow these steps for proper setup.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble Desktop: If your desktop comes in multiple sections, connect them securely using the provided fasteners.
- Attach Legs to Desktop: Position the desk legs onto the underside of the desktop. Align the screw holes and secure the legs using the provided screws. Ensure the motor and control box are oriented correctly.
- Install Foot Pads/Casters: Attach the foot pads to the bottom of the desk legs. If using the optional caster wheels, install them instead of the foot pads for mobility.
- Mount Control Panel and Accessories: Attach the control panel to the designated area on the underside of the desktop. Install the headphone hook, cup holder, and cable management tray as desired.
- Connect Wiring: Connect the motor cable(s) and control panel cable to the control box. Connect the power adapter to the control box and then to a wall outlet. Ensure all cables are neatly routed using the cable management system.
- Initial Power-On and Reset: After connecting power, the desk may perform an initial reset. If not, press and hold the "Down" button until the desk reaches its lowest position and slightly rises, indicating a successful reset.
Image: Overview of the Mondeer Electric Standing Desk with key dimensions and maximum weight capacity of 80 kg (176 lbs).
Image: Close-up view of the integrated accessories including cable management grommet, headphone hook, cup holder, and optional caster wheels.
4. Operating Instructions
4.1 Control Panel Overview
Image: Detailed view of the control panel featuring an LED display, up/down height adjustment buttons, three memory preset buttons (1, 2, 3), and a 'S' (Set) button, along with a USB charging port.
- LED Display: Shows the current desk height in centimeters or inches.
- Up/Down Buttons (▲ / ▼): Press and hold to adjust the desk height manually.
- Memory Preset Buttons (1, 2, 3): Store and recall preferred height settings.
- Set Button (S): Used to save memory presets.
- USB Charging Port: Provides power for charging devices.
4.2 Height Adjustment
- Manual Adjustment: Press and hold the ▲ button to raise the desk or the ▼ button to lower it. Release the button when the desired height is reached.
- Range: The desk can be adjusted from 72 cm (28.3 inches) to 114 cm (44.9 inches).
4.3 Setting Memory Presets
The desk allows you to save up to three preferred height settings for quick access.
- Adjust the desk to your desired height using the ▲ or ▼ buttons.
- Press the "S" button. The LED display will show "S-".
- Within 3 seconds, press the desired memory button (1, 2, or 3). The display will show "S-1", "S-2", or "S-3" to confirm the setting is saved.
To recall a saved height, simply press the corresponding memory button (1, 2, or 3). The desk will automatically move to the saved position.
4.4 USB Charging Port
The integrated USB port on the control panel can be used to charge your electronic devices. Simply connect your device's USB cable to the port.
Image: Illustration of the desk's quiet operation, indicating noise levels below 50 dB during height adjustments.
5. Maintenance
- Cleaning: Wipe the desk surface and legs with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Cable Management: Periodically check and organize cables to prevent tangling or damage during height adjustments.
- Inspection: Regularly inspect all screws and connections to ensure they are tight. Retighten if necessary.
- Lubrication: The lifting mechanism is designed to be maintenance-free. Do not apply lubricants unless specifically instructed by Mondeer support.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | Power cable disconnected; control box not connected; overload. | Check all power connections. Ensure the control box is properly connected. Reduce weight on the desk. Perform a reset (see below). |
| Desk moves unevenly or stops. | Obstruction; uneven weight distribution; system error. | Remove any obstructions. Distribute weight evenly. Perform a reset. |
| Error code on display (e.g., E01, E02). | System malfunction; motor issue. | Unplug the desk for 10 minutes, then plug it back in. If the error persists, contact customer support. |
| Desk cannot save presets. | Incorrect procedure. | Follow the "Setting Memory Presets" instructions carefully. Ensure you press "S" then the preset button within 3 seconds. |
Reset Procedure:
If the desk is not functioning correctly, a reset may resolve the issue:
- Press and hold the ▼ (Down) button until the desk reaches its lowest position.
- Continue holding the ▼ button for approximately 5-10 seconds until the desk slightly lowers further, then rises slightly. This indicates a successful reset.
- Release the button. The desk is now reset and ready for normal operation.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | FSDK17 |
| Brand | Mondeer |
| Desk Design | Electric Standing Desk |
| Dimensions (L x W x H) | 121.9 cm x 61 cm x 72-114 cm (48 x 24 x 28.3-44.9 inches) |
| Height Adjustment Range | 72 cm - 114 cm (28.3 inches - 44.9 inches) |
| Maximum Weight Capacity | 80 kg (176 lbs) |
| Motor Noise Level | Below 50 dB |
| Material | Engineered Wood (Desktop), Alloy Steel (Frame) |
| Special Features | Adjustable Height, Built-In USB Outlet, Electric, Ergonomic, Optional Wheels, Memory Presets, Cup Holder, Headphone Hook, Cable Management |
| Assembly Required | Yes |
| Recommended Assembly People | 2 (though possible with 1) |
8. Warranty and Customer Support
Mondeer products are designed for durability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Mondeer website.
If you encounter any issues, require replacement parts, or have questions regarding your Mondeer Electric Standing Desk FSDK17, please contact our customer support team:
- Email: support@mondeer.com (Example)
- Phone: 1-800-XXX-XXXX (Example)
- Website: www.mondeer.com/support (Example)
Please have your model number (FSDK17) and purchase date available when contacting support.