Bewello Universal Air Conditioner Remote Control User Manual

1. Introduction

Thank you for choosing the Bewello Universal Air Conditioner Remote Control. This remote is designed to be compatible with over 1000 brands of air conditioning units, offering a convenient solution if your original remote is lost, damaged, or if you wish to control multiple AC units with a single device. This manual provides detailed instructions on how to set up and operate your new remote control.

Figure 1: Bewello Universal Air Conditioner Remote Control in its retail packaging.

2. Product Features

• Universal Compatibility: Supports over 1000 air conditioner brands and models.
• Quick Pairing: Simple setup process using manufacturer codes.
• No Original Remote Required: Can be set up without the need for the original AC remote.
• Integrated Flashlight Function: Convenient built-in light for low-light conditions.
• Timer Function: Program your AC unit to turn on or off at specific times.
• Clear LCD Display: Easy-to-read screen showing current settings.

3. Package Contents

Please check the package contents carefully. If any items are missing or damaged, contact your retailer.

• 1 x Bewello Universal Air Conditioner Remote Control (Model: BW4008)
• 1 x User Manual (this document)
• 1 x Manufacturer Code List (typically included with the product)

Note: 2 x AAA batteries are required for operation and are not included in the package.

4. Setup

4.1 Battery Installation

1. Locate the battery compartment cover on the back of the remote control.
2. Slide the cover downwards to open the compartment.
3. Insert two (2) AAA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Slide the battery compartment cover back into place until it clicks securely.

Figure 2: Front view of the Bewello Universal Air Conditioner Remote Control.

4.2 Initial Pairing / Code Setting

The remote control needs to be programmed with the correct code for your specific air conditioner brand. Refer to the "Manufacturer Code List" provided with your remote for a comprehensive list of codes.

1. Turn on your air conditioner unit manually.
2. Find your AC unit's brand in the "Manufacturer Code List". Note down the corresponding 3-digit code(s).
3. On the remote control, press and hold the "SET" button for approximately 3 seconds until the code number on the display starts flashing.
4. Use the Temperature Up (▲) or Temperature Down (▼) buttons to enter the 3-digit code for your AC brand.
5. Point the remote control towards your AC unit and press the "OK" button. The code will stop flashing.
6. Test the remote by pressing the "ON/OFF" button. If the AC unit responds, the code is correctly set.
7. If the AC unit does not respond, repeat steps 3-6, trying the next code listed for your brand (if applicable) or trying codes from similar brands.

Tip: Some AC units may respond to multiple codes. If the first code doesn't work, try the next one until full functionality is achieved.

5. Operating Instructions

Once the remote is paired with your AC unit, you can use the following buttons and functions:

• ON/OFF (▲): Press to turn the air conditioner unit on or off.
• MODE: Press repeatedly to cycle through operating modes:
  • COOL: For cooling the room.
  • HEAT: For heating the room (if supported by your AC unit).
  • FAN: Circulates air without heating or cooling.
  • DRY: Dehumidifies the air.
  • AUTO: Automatically selects the mode based on room temperature.
• TEMP (▲/▼): Press the up arrow to increase temperature, and the down arrow to decrease temperature.
• WIND: Press repeatedly to adjust fan speed (Auto, Low, Medium, High).
• A.SWING (Auto Swing): Activates or deactivates the automatic vertical swing of the air deflector.
• M.SWING (Manual Swing): Adjusts the horizontal position of the air deflector manually.
• TIME ON / TIME OFF: Used to set a timer for the AC unit to turn on or off automatically.
  1. Press TIME ON or TIME OFF. The time display will flash.
  2. Use TEMP (▲/▼) buttons to adjust the desired time.
  3. Press OK to confirm the timer setting.
• CLOCK: Press to set the current time on the remote's display.
  1. Press CLOCK. The time display will flash.
  2. Use TEMP (▲/▼) buttons to adjust the current time.
  3. Press CLOCK again or OK to confirm.
• LIGHT: Activates the built-in flashlight on the remote control. Press again to turn off.
• F.Cool / E-heat: These buttons may correspond to specific quick-cooling or electric heating functions on some AC models. Their functionality depends on your AC unit's capabilities and the programmed code.

6. Troubleshooting

7. Maintenance

• Cleaning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement: Replace batteries when the display becomes dim or the remote's response time slows down. Always replace both batteries at the same time.
• Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and damage. Store in a cool, dry place.
• Avoid Drops: Protect the remote from drops and impacts, which can damage internal components.

8. Specifications

9. Warranty and Support

For information regarding the product warranty, please refer to the warranty card included with your purchase or consult the retailer from whom you purchased the product. You may also visit the official Bewello website for the most up-to-date warranty terms and conditions.

For technical support, troubleshooting assistance, or any other inquiries, please contact Bewello customer service through the contact information provided on their official website or your purchase documentation.